Uploaded September 2021 | Updated September 2026, 2 weeks ago
I built a French Cleat Storage Wall. Watch for part 2. Enjoy!
Overwhelmed by the support. Thanks so much for watching and giving tips from the $Thanks button above. Helps so much.
Workbench Build Tutorial: youtu.be/06UYHn0gbEc
-------------------------------------------------
I've received a few questions, so here are the measurements I used:
The cleat itself is 1.5 inches on the shorter side and 2.25 on the longer side
The gap between my cleats is 2.25 inches, but you could go 3+ inches or more.
From base of first cleat to top of second cleat is 6.75 inches.
Base of first cleat to the base of second cleat is 4.5 inches.
There have been a few comments on switching out the outlet. I switched a 15 amp outlet for a 20 amp outlet as it is on a 20 amp circuit. Do NOT place a 20 amp outlet on a 15 amp circuit. For more info, here is a link to the electrical code: https://up.codes/s/outlet-devices
Here is a link to changing a regular outlet for a USB one: youtu.be/l-Y-aL_QWbs
-------------------------------------------------
Tools used
Ryobi 18 Gauge Cordless Nailer: amzn.to/39aPWhH
Ryobi 7.25 inch Circular Saw: amzn.to/3zeQLkd
Ryobi Impact Driver: amzn.to/39bIuCU
Ryobi 4.0 Ah Battery: amzn.to/3loeIR8
Ryobi Miter Saw: amzn.to/3lu09vp
Ryobi Jig Saw: amzn.to/3nzrGOI
Best Table Saw: amzn.to/3999xyT
WEN Bandsaw: amzn.to/3JwQQru
Tape Measure: amzn.to/3XqhUhD
KREG Track saw guide attachment (square): amzn.to/42dVPoY
Materials used
Titebond Wood Glue: amzn.to/2VIDHpo
Birch Plywood 4x8 Sheet: amzn.to/3zfLjxl
2.5 inch #9 Wood Screws: amzn.to/3AgUTl2
1.5 inch 18 Gauge Brad Nails: amzn.to/3nDtvtO
---------------------------------------------------------------
Please consider donating to Primary Childrens Hospital. They do incredible work for families and children: intermountainhealthcare.org/primary-childrens/give
Please also consider giving to Give Kids the World. One of the most joyful and amazing organizations for children: give.gktw.org/give/265729/#!/donation/checkout
---------------------------------------------------------------
Not Sponsored.
Bruh - TheBeefmaster assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All material provided within this Youtube channel is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. No information contained in this video shall create any express or implied warranty or guarantee of any particular result.
TheBeefmaster will not take responsibility of what you do with the information provided by this channel. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Beefmaster. TheBeefmaster does not make any claims of the safety of the projects, techniques, or resources listed on this channel. Please do not attempt anything contained in this video unless you accept personal responsibility for the results, whether they are good or bad.
-----------------------------------------------------------
I built a French Cleat Storage Wall. Watch for part 2. Enjoy!
Overwhelmed by the support. Thanks so much for watching and giving tips from the $Thanks button above. Helps so much.
Workbench Build Tutorial: youtu.be/06UYHn0gbEc
-------------------------------------------------
I've received a few questions, so here are the measurements I used:
The cleat itself is 1.5 inches on the shorter side and 2.25 on the longer side
The gap between my cleats is 2.25 inches, but you could go 3+ inches or more.
From base of first cleat to top of second cleat is 6.75 inches.
Base of first cleat to the base of second cleat is 4.5 inches.
There have been a few comments on switching out the outlet. I switched a 15 amp outlet for a 20 amp outlet as it is on a 20 amp circuit. Do NOT place a 20 amp outlet on a 15 amp circuit. For more info, here is a link to the electrical code: https://up.codes/s/outlet-devices
Here is a link to changing a regular outlet for a USB one: youtu.be/l-Y-aL_QWbs
-------------------------------------------------
Tools used
Ryobi 18 Gauge Cordless Nailer: amzn.to/39aPWhH
Ryobi 7.25 inch Circular Saw: amzn.to/3zeQLkd
Ryobi Impact Driver: amzn.to/39bIuCU
Ryobi 4.0 Ah Battery: amzn.to/3loeIR8
Ryobi Miter Saw: amzn.to/3lu09vp
Ryobi Jig Saw: amzn.to/3nzrGOI
Best Table Saw: amzn.to/3999xyT
WEN Bandsaw: amzn.to/3JwQQru
Tape Measure: amzn.to/3XqhUhD
KREG Track saw guide attachment (square): amzn.to/42dVPoY
Materials used
Titebond Wood Glue: amzn.to/2VIDHpo
Birch Plywood 4x8 Sheet: amzn.to/3zfLjxl
2.5 inch #9 Wood Screws: amzn.to/3AgUTl2
1.5 inch 18 Gauge Brad Nails: amzn.to/3nDtvtO
---------------------------------------------------------------
Please consider donating to Primary Childrens Hospital. They do incredible work for families and children: intermountainhealthcare.org/primary-childrens/give
Please also consider giving to Give Kids the World. One of the most joyful and amazing organizations for children: give.gktw.org/give/265729/#!/donation/checkout
---------------------------------------------------------------
Not Sponsored.
Bruh - TheBeefmaster assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All material provided within this Youtube channel is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. No information contained in this video shall create any express or implied warranty or guarantee of any particular result.
TheBeefmaster will not take responsibility of what you do with the information provided by this channel. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Beefmaster. TheBeefmaster does not make any claims of the safety of the projects, techniques, or resources listed on this channel. Please do not attempt anything contained in this video unless you accept personal responsibility for the results, whether they are good or bad.
-----------------------------------------------------------
