Uploaded July 2026 | Updated November 2026, 2 days ago
In this video I show how to build a brick BBQ as a complete beginner.
BBQ grill and charcoal tray kit used in this build: amzn.to/3Rb8BDE
This is a full DIY brick BBQ build from start to finish, showing the real process of building a brick barbecue with no bricklaying experience. Iβm not a bricklayer and had never laid bricks before this project, so this is a realistic beginner bricklaying project rather than a professional bricklaying tutorial.
I built this brick BBQ on a sandstone patio that falls in both directions, so the first course was the most important part of the whole build. I show how I set out the brick barbecue, marked the layout, found the high and low points, used 10mm packers as a mortar reference, and got the first course level before building up the rest of the BBQ.
For the first course I used a sharp sand and cement mix because the mortar bed was larger than normal, and I used an SBR slurry to help bond the mortar to the sandstone slabs. For the rest of the brickwork I used a 4:1 building sand and cement mortar mix with plasticiser.
The brick BBQ uses a barbecue hardware kit with a charcoal tray and grill. This kit gave me the grill, charcoal tray and basic hardware, then I built the brickwork around it with two side worktop areas, drainage gaps at the bottom, brick ties for the inner sections, turned bricks to support the charcoal tray and grill, and slate paving slabs for the side work surfaces and top caps.
This video covers:
* How to build a brick BBQ
* DIY brick BBQ layout
* Brick BBQ for beginners
* Beginner bricklaying tips
* Laying the first course level
* Building a brick barbecue on a patio
* Using SBR slurry under mortar
* Mixing mortar for bricklaying
* Adding drainage gaps to a brick BBQ
* Supporting the charcoal tray and BBQ grill
* Adding slab worktops to a brick barbecue
This is not how a professional bricklayer would build a BBQ, but it does show what a complete beginner can achieve with patience, bricks, mortar, a level, and a BBQ kit.
The total cost was around Β£200 for the bricks, mortar materials and BBQ kit, which I think is pretty good for a permanent garden brick BBQ.
If youβre thinking about building your own brick BBQ, hopefully this video gives you a realistic idea of the process, the problems you might run into, and the end result you can get as a beginner.
its 9:20
π οΈ Tools & Gear I Use:
renovation-dan.co.uk/my-tools
Use code *RENODAN* for 5% off at Lumberjack Tools
lumberjacktools.co.uk
& 10% off Shadowfoam
http://shadowfoam.com?ref=67
π *Support the Channel:*
β buymeacoffee.com/renovationdan
π± *Follow Me on Instagram:*
instagram.com/renovation.dan
π *Visit My Website:*
renovation-dan.co.uk
π *Timestamps:*
00:00 Building a brick BBQ as a complete beginner
00:26 Setting out the brick BBQ
00:51 Getting the first course level
01:25 Using SBR slurry and laying onto sandstone
02:06 Adding drainage gaps
02:45 The BBQ kit I am using
03:06 Mixing the Mortar
03:16 Building up the brickwork
04:47 Tying in the inner BBQ sections
05:26 Adding a shelf support
05:56 Adding the charcoal tray supports
06:24 Adding the grill supports
07:02 Pointing the top section
07:31 Adding slate worktops and top caps
08:37 Finished DIY brick BBQ
09:05 Cost and final thoughts
π *About This Channel:*
On this channel, I post weekly videos covering everything from shed builds, tool wall setups, garden DIY projects, power tool tutorials, and beginner-friendly woodworking builds β all designed to help you tackle projects at home without breaking the bank.
If youβre into affordable tool reviews, practical workshop projects, and simple, satisfying DIY jobs you can do in a weekend β youβre in the right place.
_Some of the links in this description are affiliate links that may earn me affiliate payments - at no extra cost to you. Any support for the channel is massively appreciated and allows me to keep making videos._
In this video I show how to build a brick BBQ as a complete beginner.
BBQ grill and charcoal tray kit used in this build: amzn.to/3Rb8BDE
This is a full DIY brick BBQ build from start to finish, showing the real process of building a brick barbecue with no bricklaying experience. Iβm not a bricklayer and had never laid bricks before this project, so this is a realistic beginner bricklaying project rather than a professional bricklaying tutorial.
I built this brick BBQ on a sandstone patio that falls in both directions, so the first course was the most important part of the whole build. I show how I set out the brick barbecue, marked the layout, found the high and low points, used 10mm packers as a mortar reference, and got the first course level before building up the rest of the BBQ.
For the first course I used a sharp sand and cement mix because the mortar bed was larger than normal, and I used an SBR slurry to help bond the mortar to the sandstone slabs. For the rest of the brickwork I used a 4:1 building sand and cement mortar mix with plasticiser.
The brick BBQ uses a barbecue hardware kit with a charcoal tray and grill. This kit gave me the grill, charcoal tray and basic hardware, then I built the brickwork around it with two side worktop areas, drainage gaps at the bottom, brick ties for the inner sections, turned bricks to support the charcoal tray and grill, and slate paving slabs for the side work surfaces and top caps.
This video covers:
* How to build a brick BBQ
* DIY brick BBQ layout
* Brick BBQ for beginners
* Beginner bricklaying tips
* Laying the first course level
* Building a brick barbecue on a patio
* Using SBR slurry under mortar
* Mixing mortar for bricklaying
* Adding drainage gaps to a brick BBQ
* Supporting the charcoal tray and BBQ grill
* Adding slab worktops to a brick barbecue
This is not how a professional bricklayer would build a BBQ, but it does show what a complete beginner can achieve with patience, bricks, mortar, a level, and a BBQ kit.
The total cost was around Β£200 for the bricks, mortar materials and BBQ kit, which I think is pretty good for a permanent garden brick BBQ.
If youβre thinking about building your own brick BBQ, hopefully this video gives you a realistic idea of the process, the problems you might run into, and the end result you can get as a beginner.
its 9:20
π οΈ Tools & Gear I Use:
renovation-dan.co.uk/my-tools
Use code *RENODAN* for 5% off at Lumberjack Tools
lumberjacktools.co.uk
& 10% off Shadowfoam
http://shadowfoam.com?ref=67
π *Support the Channel:*
β buymeacoffee.com/renovationdan
π± *Follow Me on Instagram:*
instagram.com/renovation.dan
π *Visit My Website:*
renovation-dan.co.uk
π *Timestamps:*
00:00 Building a brick BBQ as a complete beginner
00:26 Setting out the brick BBQ
00:51 Getting the first course level
01:25 Using SBR slurry and laying onto sandstone
02:06 Adding drainage gaps
02:45 The BBQ kit I am using
03:06 Mixing the Mortar
03:16 Building up the brickwork
04:47 Tying in the inner BBQ sections
05:26 Adding a shelf support
05:56 Adding the charcoal tray supports
06:24 Adding the grill supports
07:02 Pointing the top section
07:31 Adding slate worktops and top caps
08:37 Finished DIY brick BBQ
09:05 Cost and final thoughts
π *About This Channel:*
On this channel, I post weekly videos covering everything from shed builds, tool wall setups, garden DIY projects, power tool tutorials, and beginner-friendly woodworking builds β all designed to help you tackle projects at home without breaking the bank.
If youβre into affordable tool reviews, practical workshop projects, and simple, satisfying DIY jobs you can do in a weekend β youβre in the right place.
_Some of the links in this description are affiliate links that may earn me affiliate payments - at no extra cost to you. Any support for the channel is massively appreciated and allows me to keep making videos._










