Uploaded January 2021 | Updated November 2026, 3 hours ago
Congratulations! You just purchased one of the most versatile pieces of equipment for your home gym: The REP Lat/Low Row Attachment. Follow these step-by-step instructions to install the attachment with ease:
00:00 How to Install the REP Fitness Lat/Low Row (4000 & 5000 Series Racks)
02:16 Step 1) Install Rear Base Stabilizer (RBS) on rack
02:47 Step 2) Attach front base of REP Fitness Lat Low Row to RBS
03:34 Step 3) Attach guide rods to rear base of lat low row & Tighten bolts
04:53 Step 4) Attach rear base to front base
05:25 Step 5a) Slide on rubber donuts, then trolley (no weight horns)
06:18 Step 5b) Attach weight horns to trolley and tighten bolts
07:20 Step 6) Attach upper pulley beam onto both Logo plate and guide rods
09:18 Step 7a) Route upper cable (goes above bar on upper pulley bar, not inside)
10:03 Step 7b) Install pulleys for upper cable
13:49 Step 8a) Route lower cable
14:29 Step 8b) Install pulleys for lower cable
15:39 Step 8c) Adjust lower cable tension with chain
17:01 Step 9) Insert foot pad and install spring pin/knob
17:58 Step 10) Tighten all hardware (bottom to top)Ensure top and bottom squareness
18:21 Step 11) Silicone spray on guide rods
If you have any questions throughout the installation process, email us at orders@repfitness.com and our awesome customer service team will help you out!
Visit: repfitness.com
Call: (720) 420-1731
Email: info@repfitness.com
Follow us!
Instagram: instagram.com/repfitnessequipment
Facebook: facebook.com/repfitness
Congratulations! You just purchased one of the most versatile pieces of equipment for your home gym: The REP Lat/Low Row Attachment. Follow these step-by-step instructions to install the attachment with ease:
00:00 How to Install the REP Fitness Lat/Low Row (4000 & 5000 Series Racks)
02:16 Step 1) Install Rear Base Stabilizer (RBS) on rack
02:47 Step 2) Attach front base of REP Fitness Lat Low Row to RBS
03:34 Step 3) Attach guide rods to rear base of lat low row & Tighten bolts
04:53 Step 4) Attach rear base to front base
05:25 Step 5a) Slide on rubber donuts, then trolley (no weight horns)
06:18 Step 5b) Attach weight horns to trolley and tighten bolts
07:20 Step 6) Attach upper pulley beam onto both Logo plate and guide rods
09:18 Step 7a) Route upper cable (goes above bar on upper pulley bar, not inside)
10:03 Step 7b) Install pulleys for upper cable
13:49 Step 8a) Route lower cable
14:29 Step 8b) Install pulleys for lower cable
15:39 Step 8c) Adjust lower cable tension with chain
17:01 Step 9) Insert foot pad and install spring pin/knob
17:58 Step 10) Tighten all hardware (bottom to top)Ensure top and bottom squareness
18:21 Step 11) Silicone spray on guide rods
If you have any questions throughout the installation process, email us at orders@repfitness.com and our awesome customer service team will help you out!
Visit: repfitness.com
Call: (720) 420-1731
Email: info@repfitness.com
Follow us!
Instagram: instagram.com/repfitnessequipment
Facebook: facebook.com/repfitness


![How We Engineered The REP Strive™ Curved Treadmill
What youll see in this video:
✔ The clutch disconnect system — true decoupling between run mode and sled mode, so your runs stay smooth and your sled pushes stay heavy
✔ 8 resistance levels, from 25 lb all the way up to 550 lb
✔ Adjustable deck angle (0° and 3°) for Go Long endurance runs or Go Hard sprint intervals
✔ The heads-down display that lets you track sled distance without breaking position
✔ Console features, Bluetooth/FTMS connectivity, and Challenge Mode
✔ Real specs: dimensions, weight, max user weight, battery power, and maintenance
Whether youre training for a hybrid competition, marathon, or everyday fitness, the Strive™ Curved Treadmill is engineered to give you an athletic running experience with true strength-training functionality built in — no motor, no outlet required, and less than most curved treadmills cost when you factor in everything it replaces.
🏋️ Shop the Strive™ Curved Treadmill: https://repfitness.com/products/rep-strive-series-curved-treadmill?variant=43288603099294
📍 Try it in person: Southern California, Lafayette, CO [coming soon!], or Carlisle, PA showrooms
💬 Questions? Our Colorado-based customer support team is here to help: https://repfitness.com/pages/contact-us
👥 Join the conversation: https://www.facebook.com/groups/repfitness/discussion/preview/
Timestamps:
0:00 Intro to the Strive Curved Treadmill
1:58 Why manual over motorized?
3:35 Meet the product & engineering team
4:18 Running function breakdown
5:06 Adjustable deck angle: Go Long vs. Go Hard
7:37 Sled mode setup & clutch disconnect
8:52 Resistance levels & hand placement
10:29 Heads-down display
11:13 Light resistance uses: incline walk, backward drag, belt squat
12:24 Console overview
13:16 Community Q&A: dimensions, weight, batteries, maintenance
#RepFitness #CurvedTreadmill #StriveTreadmill #HomeGym #HybridTraining #StrengthTraining #CardioEquipment #SledTraining
Visit: https://www.repfitness.com
Call - Email - or Chat with our team - https://repfitness.com/pages/contact-us
Visit our showrooms in Pennsylvania and California to test and load up on REP equipment in person.
Instagram: https://www.instagram.com/repfitnessequipment/
Facebook: https://www.facebook.com/repfitness
TikTok: https://www.tiktok.com/channel/rep-fitness?lang=en How We Engineered The REP Strive™ Curved Treadmill](https://i.ytimg.com/vi/S2id4GoAgG4/mqdefault.jpg)







