Uploaded October 2026 | Updated November 2026, 29 minutes ago
Learn how to apply Stone Coat Ultimate Top Coat (UTC), from sanding and mixing to roller application and dry rolling. This step-by-step tutorial shows how to create a textured matte finish with added scratch resistance for your countertop or epoxy project. stonecoatcountertops.com/products/topcoat
We’re applying Ultimate Top Coat over an APEX countertop in this video, but the same application method works over our epoxy systems on countertops, shower walls, and woodworking projects. Follow the preparation and cure requirements for your underlying coating before applying UTC.
🛒 SHOP ULTIMATE TOP COAT
Choose your finish and find coverage, mixing, and application instructions:
stonecoatcountertops.com/products/topcoat
Ultimate Top Coat comes in Textured Matte and Textured Gloss. Both create a textured finish inspired by leathered granite; Textured Gloss provides a subtle semi-gloss sheen.
CHAPTERS
0:00 Ultimate Top Coat Surface Prep: Sanding Matte vs. Gloss
0:17 Prepare Microfiber Rollers: Remove Lint
0:44 Shake Matte Top Coat Before Mixing
0:59 Ultimate Top Coat Mixing Ratio & Adding Water
1:29 How to Roll On Ultimate Top Coat
2:07 Dry Rolling Ultimate Top Coat
2:20 Roller Direction: How to Reduce Lap Lines
2:36 Ultimate Top Coat Drying & Cure Time
HOW TO APPLY ULTIMATE TOP COAT
1. PREPARE AND SAND THE SURFACE
Start with a properly cured coating ready for sanding. Sand the surface and edges with 220-grit sandpaper for Textured Matte or 320-grit for Textured Gloss. Remove sanding dust, wipe with 91% isopropyl alcohol, and let the surface dry completely.
2. REMOVE LINT FROM YOUR ROLLERS
Use 1/4-inch nap microfiber rollers. Roll each cover across masking tape to remove loose fibers before they end up in your finish. For a 40-square-foot kitchen, have approximately 2 wet rollers and 3–4 dry rollers prepared before mixing. The extra rollers are for insurance.
3. SHAKE THE MATTE TOP COAT
Shake the sealed Part A container thoroughly before measuring. Matting agents can settle during storage, so this step helps produce the intended matte sheen.
4. MEASURE, MIX, AND ADD WATER
Calculate your batch: project square footage × 0.275 = fluid ounces of combined UTC Parts A and B, before adding water.
Measure 2 parts A to 1 part B by volume. Mix thoroughly according to the instructions included with your kit, then add room-temperature water and mix again.
Water amounts are based on the combined volume of Parts A and B:
• Textured Matte: Add 0.16 fl oz of water per 1 fl oz of mixed UTC.
• Textured Gloss: Add 0.5 fl oz of water per 1 fl oz of mixed UTC.
Water is required. Add room temperature water after combining Parts A and B. Have everything ready beforehand—the working time is approximately 15 minutes once the components are combined.
5. APPLY WITH YOUR WET ROLLER
Pour the mixture into a paint tray. Fully load your prepared roller, then roll off the excess in the tray. Apply in a V pattern, starting in the middle and working left and right.
Reload, move over a few passes, and repeat to distribute the material evenly. Cover the surface and edges, working in manageable sections within the working time.
6. SWITCH TO A DRY ROLLER
Use a clean, delinted dry roller with light pressure to remove excess material and even out the finish.
Lead with the heavier roller-frame side as you move across the surface. This lets the lighter, unsupported side feather the lap lines. Work consistently from one side to the other.
7. AVOID OVERWORKING THE FINISH
Switch to a fresh dry roller when the roller becomes loaded or starts making a sticky sound. Stop rolling once the coating becomes tacky; continuing can create unwanted texture. UTC applies milky and dries clear.
8. LET THE TOP COAT CURE
Plan to leave the surface unused for 36–48 hours, as discussed in the video. Follow your kit’s current instructions for cure conditions and return to service.
PRO TIP: Wait at least 48 hours before placing items on your Ultimate Top Coat surface, aside from the sink and faucet. After 48 hours, you can lightly rub the surface with a clean piece of Ram Board to knock down any high points in the texture. Avoid doing this earlier—the finish can scratch before it has had enough time to cure.
Ready to finish your project? Shop Ultimate Top Coat and choose Textured Matte or Textured Gloss:
stonecoatcountertops.com/products/topcoat
#StoneCoatCountertops #UltimateTopCoat #EpoxyCountertops
Learn how to apply Stone Coat Ultimate Top Coat (UTC), from sanding and mixing to roller application and dry rolling. This step-by-step tutorial shows how to create a textured matte finish with added scratch resistance for your countertop or epoxy project. stonecoatcountertops.com/products/topcoat
We’re applying Ultimate Top Coat over an APEX countertop in this video, but the same application method works over our epoxy systems on countertops, shower walls, and woodworking projects. Follow the preparation and cure requirements for your underlying coating before applying UTC.
🛒 SHOP ULTIMATE TOP COAT
Choose your finish and find coverage, mixing, and application instructions:
stonecoatcountertops.com/products/topcoat
Ultimate Top Coat comes in Textured Matte and Textured Gloss. Both create a textured finish inspired by leathered granite; Textured Gloss provides a subtle semi-gloss sheen.
CHAPTERS
0:00 Ultimate Top Coat Surface Prep: Sanding Matte vs. Gloss
0:17 Prepare Microfiber Rollers: Remove Lint
0:44 Shake Matte Top Coat Before Mixing
0:59 Ultimate Top Coat Mixing Ratio & Adding Water
1:29 How to Roll On Ultimate Top Coat
2:07 Dry Rolling Ultimate Top Coat
2:20 Roller Direction: How to Reduce Lap Lines
2:36 Ultimate Top Coat Drying & Cure Time
HOW TO APPLY ULTIMATE TOP COAT
1. PREPARE AND SAND THE SURFACE
Start with a properly cured coating ready for sanding. Sand the surface and edges with 220-grit sandpaper for Textured Matte or 320-grit for Textured Gloss. Remove sanding dust, wipe with 91% isopropyl alcohol, and let the surface dry completely.
2. REMOVE LINT FROM YOUR ROLLERS
Use 1/4-inch nap microfiber rollers. Roll each cover across masking tape to remove loose fibers before they end up in your finish. For a 40-square-foot kitchen, have approximately 2 wet rollers and 3–4 dry rollers prepared before mixing. The extra rollers are for insurance.
3. SHAKE THE MATTE TOP COAT
Shake the sealed Part A container thoroughly before measuring. Matting agents can settle during storage, so this step helps produce the intended matte sheen.
4. MEASURE, MIX, AND ADD WATER
Calculate your batch: project square footage × 0.275 = fluid ounces of combined UTC Parts A and B, before adding water.
Measure 2 parts A to 1 part B by volume. Mix thoroughly according to the instructions included with your kit, then add room-temperature water and mix again.
Water amounts are based on the combined volume of Parts A and B:
• Textured Matte: Add 0.16 fl oz of water per 1 fl oz of mixed UTC.
• Textured Gloss: Add 0.5 fl oz of water per 1 fl oz of mixed UTC.
Water is required. Add room temperature water after combining Parts A and B. Have everything ready beforehand—the working time is approximately 15 minutes once the components are combined.
5. APPLY WITH YOUR WET ROLLER
Pour the mixture into a paint tray. Fully load your prepared roller, then roll off the excess in the tray. Apply in a V pattern, starting in the middle and working left and right.
Reload, move over a few passes, and repeat to distribute the material evenly. Cover the surface and edges, working in manageable sections within the working time.
6. SWITCH TO A DRY ROLLER
Use a clean, delinted dry roller with light pressure to remove excess material and even out the finish.
Lead with the heavier roller-frame side as you move across the surface. This lets the lighter, unsupported side feather the lap lines. Work consistently from one side to the other.
7. AVOID OVERWORKING THE FINISH
Switch to a fresh dry roller when the roller becomes loaded or starts making a sticky sound. Stop rolling once the coating becomes tacky; continuing can create unwanted texture. UTC applies milky and dries clear.
8. LET THE TOP COAT CURE
Plan to leave the surface unused for 36–48 hours, as discussed in the video. Follow your kit’s current instructions for cure conditions and return to service.
PRO TIP: Wait at least 48 hours before placing items on your Ultimate Top Coat surface, aside from the sink and faucet. After 48 hours, you can lightly rub the surface with a clean piece of Ram Board to knock down any high points in the texture. Avoid doing this earlier—the finish can scratch before it has had enough time to cure.
Ready to finish your project? Shop Ultimate Top Coat and choose Textured Matte or Textured Gloss:
stonecoatcountertops.com/products/topcoat
#StoneCoatCountertops #UltimateTopCoat #EpoxyCountertops










