Smooth-On | How To Add Weight To Cold Cast Metal Castings Using URE-FIL™ 17 @smoothon | Uploaded September 2020 | Updated October 2024, 4 days ago.
See how URE-FIL™ 17 can be used to add realistic weight to a resin metal cold casting.
URE-FIL™ 17 pure aluminum pellet filler can be used with Smooth-On® liquid epoxy and urethane
resins to improve thermal conductivity, dimensional stability, reduce shrinkage in large mass castings, etc.
These fillers can also be used to add evenly distributed weight to metal cold-castings and to create artistic casting effects.
URE-FIL™ 17 are small grain aluminum pellets (400 micron). Smaller grain pellets will settle into areas of detail better, reducing voids between particles.
URE-FIL™ 17 can be added to aluminum-filled urethane and epoxy resins for vacuum forming applications to increase thermal conductivity (even heat distribution) when casting parts for applications with higher temperature requirements.
URE-FIL™ 17 will add evenly distributed weight to metal cold-castings to simulate the feel of solid metal reproductions at a reduced expense compared to metal foundry castings.
URE-FIL™ 17 will lower exothermic (heat) temperatures during cure cycle, which reduces the shrinkage rate resulting in improved dimensional stability in large mass castings.
URE-FIL™ 17 can be added to liquid urethane and epoxy resins to create metallic visual effects when used with clear and colored liquid plastics.
Adult Supervision Required
Keep Out Of Reach Of Children
---
Make It Now! with Smooth-On
smooth-on.com
facebook.com/SmoothOn
twitter.com/SmoothOn
instagram.com/SmoothOn
See how URE-FIL™ 17 can be used to add realistic weight to a resin metal cold casting.
URE-FIL™ 17 pure aluminum pellet filler can be used with Smooth-On® liquid epoxy and urethane
resins to improve thermal conductivity, dimensional stability, reduce shrinkage in large mass castings, etc.
These fillers can also be used to add evenly distributed weight to metal cold-castings and to create artistic casting effects.
URE-FIL™ 17 are small grain aluminum pellets (400 micron). Smaller grain pellets will settle into areas of detail better, reducing voids between particles.
URE-FIL™ 17 can be added to aluminum-filled urethane and epoxy resins for vacuum forming applications to increase thermal conductivity (even heat distribution) when casting parts for applications with higher temperature requirements.
URE-FIL™ 17 will add evenly distributed weight to metal cold-castings to simulate the feel of solid metal reproductions at a reduced expense compared to metal foundry castings.
URE-FIL™ 17 will lower exothermic (heat) temperatures during cure cycle, which reduces the shrinkage rate resulting in improved dimensional stability in large mass castings.
URE-FIL™ 17 can be added to liquid urethane and epoxy resins to create metallic visual effects when used with clear and colored liquid plastics.
Adult Supervision Required
Keep Out Of Reach Of Children
---
Make It Now! with Smooth-On
smooth-on.com
facebook.com/SmoothOn
twitter.com/SmoothOn
instagram.com/SmoothOn
