How to add GPS to Your Raspberry Pi Pico | A Simple GPS Project @Core-Electronics
How to add GPS to Your Raspberry Pi Pico | A Simple GPS Project  @Core-Electronics
Uploaded March 2025 | Updated November 2026, 3 hours ago
๐Ÿ”— *The full guide* : _https://core-electronics.com.au/guides/raspberry-pi-pico/how-to-add-gps-to-a-raspberry-pi-pico/_

In this video, we will be learning how to add a GPS receiver module to a Raspberry Pi Pico. We will be taking a look at how GPS works, and how to wire up and code your project to get coordinates, as a final step, we will be making a short and sweet GPS project - a small device that tracks a target location and uses our current location to display the distance and direction to that target, allowing you to navigate there from anywhere on the surface of the earth.

๐Ÿ”ง๐Ÿ”จ๐Ÿงฐ Hardware featured in this guide:

*NEO-6M GPS Module:*
_https://core-electronics.com.au/catalog/product/view/sku/CE05949_
*Picos:*
_https://core-electronics.com.au/raspberry-pi/pico.html#category_2118_

๐Ÿ’กโ“ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _coreelec.io/forum_

0:00 What we are doing
0:20 How GPS works
1:57 What you will need
2:15 Wiring up the GPS module
3:00 Reading the raw UART output
6:55 Using a GPS library
9:25 Project: DIY navigation device

๐ŸŒ๐Ÿฆ˜ *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:

โ€ข *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
โ€ข *Arduino* _https://core-electronics.com.au/arduino.html_
โ€ข *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
โ€ข *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
โ€ข *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
โ€ข *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_

The following trademarks are owned by *Core Electronics Pty Ltd:*

"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo
How to add GPS to Your Raspberry Pi Pico | A Simple GPS ProjectDetect and Track Humans with a Raspberry Pi | mmWave Radar SensorPiicoDev #Laser #Distance SensorCutting Your First 3D Object On a Makera CarveraMaker Quiz 19 #Makerquiz #Maker #TriviaRaspberry Pi Connect Browser Based Remote Control #raspberrypiHow to add GPS to an Arduino & Make a Simple Navigation ProjectSetting Up Your Makera Carvera (And Running Your First Cut!)Raspberry Pi AI HAT Pose Estimation is Easy!Doom on a HDMI Adapter and Salt Batteries | Maker NewsRaspberry Pi Pico Variants | Raspberry Pi Pico Workshop: Chapter 1.3mBot2 Educational Robotics Kit!
Core Electronics |

How to add GPS to Your Raspberry Pi Pico | A Simple GPS Project

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER