NeedItMakeIt | How Much Can You Twist a 3D Print Before it Breaks? @NeedItMakeIt | Uploaded June 2024 | Updated October 2024, 19 hours ago.
How strong are 3D prints and how do they compare to common building materials?
Help support this channel! patreon.com/Needitmakeit
In this video we're testing more than 3D printed connections to try to get a better sense of just how much abuse a 3D printed connection can take in comparison to other more well-known materials. We're testing OSB, we're testing Plywood, Solid Spruce, and Solid Maple.
The test is focused on Torque or Twisting the parts to get them to fail, and the results for quite a few of the tests took my by surprise.
I hope you enjoy(ed) the video!
For this video, I've used the Bambu X1C, the filament was Bambu PETG-CF in Brick Red and in Titan Grey linked below (I receive a small commission if purchased through my link and it helps me continue to make videos like these):
Link to all of the connections!
makerworld.com/en/models/496154
One way to support this channel is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
Bambu Filament Shown in Videos
shrsl.com/4ks0j
Torque Meter
US: amzn.to/3KUdSsE
CAN: amzn.to/3RyhRyv
#1 Core XY - Best bang-for-buck
QIDI Q1 Pro - qidi3d.com/products/q1-pro?sca_ref=5735403.eknTRISP1e
This printer isn't as full featured as the X1C, but it is very capable and very precise. It also has a heated chamber and can reach higher hot end temps.
#2 Core XY - Most features with great results but Pricey $$
Bambu X1C - shrsl.com/4j1gz
Panda Jet For Bambu P1 and X1 Series (Tested and proven to work well)
PANDA JET: shrsl.com/4jhht
#3dprinting
#x1c
#strong
How strong are 3D prints and how do they compare to common building materials?
Help support this channel! patreon.com/Needitmakeit
In this video we're testing more than 3D printed connections to try to get a better sense of just how much abuse a 3D printed connection can take in comparison to other more well-known materials. We're testing OSB, we're testing Plywood, Solid Spruce, and Solid Maple.
The test is focused on Torque or Twisting the parts to get them to fail, and the results for quite a few of the tests took my by surprise.
I hope you enjoy(ed) the video!
For this video, I've used the Bambu X1C, the filament was Bambu PETG-CF in Brick Red and in Titan Grey linked below (I receive a small commission if purchased through my link and it helps me continue to make videos like these):
Link to all of the connections!
makerworld.com/en/models/496154
One way to support this channel is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
Bambu Filament Shown in Videos
shrsl.com/4ks0j
Torque Meter
US: amzn.to/3KUdSsE
CAN: amzn.to/3RyhRyv
#1 Core XY - Best bang-for-buck
QIDI Q1 Pro - qidi3d.com/products/q1-pro?sca_ref=5735403.eknTRISP1e
This printer isn't as full featured as the X1C, but it is very capable and very precise. It also has a heated chamber and can reach higher hot end temps.
#2 Core XY - Most features with great results but Pricey $$
Bambu X1C - shrsl.com/4j1gz
Panda Jet For Bambu P1 and X1 Series (Tested and proven to work well)
PANDA JET: shrsl.com/4jhht
#3dprinting
#x1c
#strong
