Uploaded February 2021 | Updated November 2026, 2 days ago
A lot of the models that I make and print are complicated with numerous overhangs, crinkly bits, and delicate structures. I've developed a good workflow in Lychee Slicer that usually gives me a great print on the first try.
In this vid I'll walk through my process and give a few tips that are working well for me.
Checkout my Patron for 3D printable plants, terrain, and artifacts.
patreon.com/DonWhitaker
tl;dw version:
* Use Auto Orient to find a good orientation
* Select Light Supports and generate Auto Supports
* Use Island Detector with Detailed setting
* Select Light Supports, then Add Support to All Islands button
* Support remaining Island manually using light and mini supports
* Add anchoring supports with Medium settings near bottom of model
* Back to Light settings for more anchoring throughout model
* Sanity check and extra mini supports on problem areas
A lot of the models that I make and print are complicated with numerous overhangs, crinkly bits, and delicate structures. I've developed a good workflow in Lychee Slicer that usually gives me a great print on the first try.
In this vid I'll walk through my process and give a few tips that are working well for me.
Checkout my Patron for 3D printable plants, terrain, and artifacts.
patreon.com/DonWhitaker
tl;dw version:
* Use Auto Orient to find a good orientation
* Select Light Supports and generate Auto Supports
* Use Island Detector with Detailed setting
* Select Light Supports, then Add Support to All Islands button
* Support remaining Island manually using light and mini supports
* Add anchoring supports with Medium settings near bottom of model
* Back to Light settings for more anchoring throughout model
* Sanity check and extra mini supports on problem areas










