Uploaded May 2026 | Updated November 2026, 10 hours ago
3D printing is everywhere in the audio world right now — but most builders are using it for the wrong things. Here's exactly how I use it inside every Arcus speaker, and why it gives a small boutique builder a real advantage over mass production.
In this video I walk through three specific roles 3D printing plays in the Arcus build: permanent internal components, geometry that injection molding simply can't achieve cleanly, and prototype molds for the concrete cabinet itself. I also explain why injection molding is still the superior finish in many cases — and where 3D printing genuinely wins.
This isn't about printing an entire speaker cabinet from filament. It's about using the tool for what it's actually good at: iteration speed, complex geometry, and production-worthy precision parts at small-batch economics.
If you're a DIY speaker builder, a maker who 3D prints, or someone trying to understand how a small boutique operation competes with companies that have million-dollar tooling budgets — this one's for you.
────────────────────────────
🔊 THE ARCUS SPEAKER
Specs, frequency response measurements, and purchase info:
→ stonesonicaudio.com
────────────────────────────
📌 CHAPTERS
0:00 — Introduction
0:52 — The internal 3D printed parts you'll never see
1:28 — Printing on the Bambu X1C — workflow and iteration speed
2:07 — When injection molding wins (and when it doesn't)
2:52 — The geometry problem: why the Neo3 holder can't be molded
3:57 — 3D printed molds for the concrete cabinet
4:41 — Moving to production tooling
5:22 — What 3D printing actually accomplished
────────────────────────────
StoneSonic Audio builds handmade mineral-cast concrete speakers designed for people who take sound seriously.
#DIYspeakers #3Dprinting #speakerbuild
3D printing is everywhere in the audio world right now — but most builders are using it for the wrong things. Here's exactly how I use it inside every Arcus speaker, and why it gives a small boutique builder a real advantage over mass production.
In this video I walk through three specific roles 3D printing plays in the Arcus build: permanent internal components, geometry that injection molding simply can't achieve cleanly, and prototype molds for the concrete cabinet itself. I also explain why injection molding is still the superior finish in many cases — and where 3D printing genuinely wins.
This isn't about printing an entire speaker cabinet from filament. It's about using the tool for what it's actually good at: iteration speed, complex geometry, and production-worthy precision parts at small-batch economics.
If you're a DIY speaker builder, a maker who 3D prints, or someone trying to understand how a small boutique operation competes with companies that have million-dollar tooling budgets — this one's for you.
────────────────────────────
🔊 THE ARCUS SPEAKER
Specs, frequency response measurements, and purchase info:
→ stonesonicaudio.com
────────────────────────────
📌 CHAPTERS
0:00 — Introduction
0:52 — The internal 3D printed parts you'll never see
1:28 — Printing on the Bambu X1C — workflow and iteration speed
2:07 — When injection molding wins (and when it doesn't)
2:52 — The geometry problem: why the Neo3 holder can't be molded
3:57 — 3D printed molds for the concrete cabinet
4:41 — Moving to production tooling
5:22 — What 3D printing actually accomplished
────────────────────────────
StoneSonic Audio builds handmade mineral-cast concrete speakers designed for people who take sound seriously.
#DIYspeakers #3Dprinting #speakerbuild










