How an Axial Tape Feeder Works | SAF1001 Lead Cut & U-Form @Smthelping
How an Axial Tape Feeder Works | SAF1001 Lead Cut & U-Form  @Smthelping
Uploaded October 2026 | Updated November 2026, 11 hours ago
Welcome to subscribe to my channel to learn more about SMT equipment made in China
youtube.com/c/Smthelping?sub_confirmation=1


Axial resistors, diodes and jump wires still arrive on paper tape, and picking them by hand is the hidden bottleneck on a mixed-technology PCB line: slow, inconsistent and easy to get wrong. The SAF1001 axial tape feeder from Southern Machinery turns a taped strip into a trimmed, U-formed component at a fixed pick point, ready for your odd-form inserter or robot.

This 4K animation is built from the feeder's own 3D CAD model and walks through every step:
• Load: a horizontal tape tray, guide blocks, press blocks and anti-reverse claws keep the strip flat and moving one way
• Index: a compact air cylinder pushes a slide with index pawls on the leads, one pitch per cycle; an adjustable stop block sets the stroke
• Trim + form: a Ø32 mm cylinder drives the moving knife up, trimming both leads against the fixed knife and bending them into a U in one stroke
• Pick point: optical fibre sensing plus air-cylinder fine-tuning, 0.8 s per feed at ±0.3 mm feeding accuracy
• Waste tape: a second cylinder chops the empty paper tape; front-end vertical drop (reflow type optional)
• Inside: solenoid valves and a PLC-based control board; key-located mounting with a spring-loaded press block
• 24 V, 0.4–0.6 MPa air, IO over an 8-core aviation plug, or standalone button operation
• Components 3×3 to 6×20 mm on 35 / 64 / 92 mm tape (customised widths on request)
• Every unit passes 1000 consecutive feeds and a 48-hour ageing test

Already installed on Panasonic, JUKI, Yamaha and Mirae odd-form machines.

Chapters
0:00 The axial-parts problem
0:15 Meet the SAF1001 axial tape feeder
0:26 Load: tray, guide blocks, press blocks, anti-reverse claws
0:39 Index: air cylinder, slide and index pawls
0:56 Trim + U-form in one stroke
1:09 Pick point: optical fibre, 0.8 s per feed, ±0.3 mm
1:25 Waste tape chopped and dropped
1:37 Inside: solenoid valves, PLC board, key-located mounting
1:48 24 V, air, IO or standalone + factory validation
2:06 Send us your part

Send us your part and your machine: smthelp.com
SAF1001 axial tape feeder page (3D model, specs): smthelp.com/saf1001-axial-tape-feeder-smart-ems-pcb-assembly.html
Subscribe for more SMT & THT automation: youtube.com/c/Smthelping

#AxialFeeder #TapeFeeder #THT #PCBA #SMT #OddForm #FactoryAutomation

TAGS :
axial tape feeder, axial feeder, SAF1001, taped resistor feeder, taped diode feeder, jumper wire feeder, axial lead cutting, lead forming, U forming, THT automation, odd form insertion, auto insertion, PCB assembly, PCBA, SMT feeder, Southern Machinery, smthelp, Panasonic odd form, JUKI odd form, Yamaha odd form, Mirae odd form, how a tape feeder works, 3D animation
How an Axial Tape Feeder Works | SAF1001 Lead Cut & U-FormMagnetic Navigation AGV Route Design for SMT Factories | Southern Machinery SFY03Automated XH, VH & Header Connector Insertion: PCB Solution & ROIOne Good Cycle Doesnt Mean Stable Production | THT Insertion Machine Testing.#SMT #THTAutomationHow China made Auto Insertion machine for Smart EMS factory PCB assembly #smt #machineJUKI Coil Gripper Nozzle CN-SM-2713 | 3-Point Grip, No Bent LeadsSRT7001 Reel Terminal Feeder - Automatic Terminal Insertion for SMT & THT PCB AssemblyRGB LED Insertion Machine: Red, Green & Blue LEDs in One MachineNo AGV Engineer on Site? How to Maintain a Magnetic Navigation AGVS-D602 LED V-Cut PCB Depaneler | PCB Separation WorkflowCustomized Gripper Nozzles for JUKI JM20 Working with BOBINA Tray | Southern MachineryBuying a Terminal Insertion Machine: Checklist for Your THT Line
SMT solution provider |

How an Axial Tape Feeder Works | SAF1001 Lead Cut & U-Form

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER