Uploaded August 2026 | Updated November 2026, 3 hours ago
How do telescope mirrors create an image using wave interference? The video uses simulation to discuss how this works. At the same time it describes the effect of aperture diameter, wavelength and aberration frequencies present in the reflective surface.
00:00 Intro
02:23 Limitations of the simulations
06:09 Parabola vs Sphere
08:11 Maximum resolution limited by Aperture
09:38 Minimum angle of separation explained
11:09 Maximum resolution limited by Wavelength
12:36 Minimum distance of separation explained using interference
16:56 How spatial frequency errors influence image quality
23:51 A wave bouncing of a rough surface
All simulations were produced using a script by @DiffractionLimited as a basis. Thank you Manuel for making this very useful piece of software! If you want to try this yourself, please download the scripts here: github.com/0x23/WaveSimulator2D
I used a short clip from a video by Omroep Flevoland on telescope making at the astronomy club in Almere featuring Jan van Gastel and others. You can watch the full video here: youtube.com/watch?v=PWwlsTCvhLw
This is a link to another video I made a few years ago on the angular resolution of telescopes: youtube.com/watch?v=gOpbXBppUEU&t=287s
If you want to know how to measure surface roughness using White Light Interferometry, I recommend this video about the subject: youtube.com/watch?v=yMeRAg61_Wc
the surface roughness plots were made using Gwyddion. download Gwyddion from: gwyddion.net
If you want to measure surface roughness down to the atomic resolution using optical principles yourself then watch how to do that in this video by @cylosgarage: youtube.com/watch?v=uvxDJ61e9xE
End music: "More to Light". © JJM Vleggaar / Earlybirds (2000)
How do telescope mirrors create an image using wave interference? The video uses simulation to discuss how this works. At the same time it describes the effect of aperture diameter, wavelength and aberration frequencies present in the reflective surface.
00:00 Intro
02:23 Limitations of the simulations
06:09 Parabola vs Sphere
08:11 Maximum resolution limited by Aperture
09:38 Minimum angle of separation explained
11:09 Maximum resolution limited by Wavelength
12:36 Minimum distance of separation explained using interference
16:56 How spatial frequency errors influence image quality
23:51 A wave bouncing of a rough surface
All simulations were produced using a script by @DiffractionLimited as a basis. Thank you Manuel for making this very useful piece of software! If you want to try this yourself, please download the scripts here: github.com/0x23/WaveSimulator2D
I used a short clip from a video by Omroep Flevoland on telescope making at the astronomy club in Almere featuring Jan van Gastel and others. You can watch the full video here: youtube.com/watch?v=PWwlsTCvhLw
This is a link to another video I made a few years ago on the angular resolution of telescopes: youtube.com/watch?v=gOpbXBppUEU&t=287s
If you want to know how to measure surface roughness using White Light Interferometry, I recommend this video about the subject: youtube.com/watch?v=yMeRAg61_Wc
the surface roughness plots were made using Gwyddion. download Gwyddion from: gwyddion.net
If you want to measure surface roughness down to the atomic resolution using optical principles yourself then watch how to do that in this video by @cylosgarage: youtube.com/watch?v=uvxDJ61e9xE
End music: "More to Light". © JJM Vleggaar / Earlybirds (2000)


![Not a photon in sight! [#shorts]
#shorts, my first one (and maybe my last!)
The video video illustrates how the Electromagnetic field inside a laser beam can locally be made virtually zero creating destructive interference. This is achieved by just placing a pinhole of the right size inside the beam. The size of the pinhole for this experiment is around 25 microns. Not a photon in sight! [#shorts]](https://i.ytimg.com/vi/nsxJQr57_is/mqdefault.jpg)







