Uploaded May 2020 | Updated September 2026, 2 weeks ago
This video is made as a guideline to show you how to replace all the seals as well as the bearing on your Honda power steering pump. This video was filmed on a 2004 Honda Accord, but will apply to most Hondas of the 90s and 2000s.
I hope it was helpful!
Parts used in this video:
- Power Steering Pump Gasket Kit (make sure to select your specific year and model when choosing the seal kit): rockauto.com/en/catalog/honda,2004,accord,3.0l+v6,1425428,steering
- Power Steering Shaft Bearing: amazon.com/Genuine-Honda-91048-P2A-003-Ball-Bearing/dp/B00MJ115RU
- Honda Genuine Power Steering Fluid (Recommended): It’s cheapest at the parts department of your local Honda dealer, so go get it there! If not, here’s what I used…
- Prestone Power Steering Fluid for Asian Vehicles: amazon.com/Prestone-AS269-Power-Steering-Vehicles/dp/B007PZNNWK
Tools used in this video:
- 3/8” Deep 6-Point Sockets: harborfreight.com/10-pc-38-in-drive-metric-high-visibility-deep-socket-67867.html
- 3/8” Ratchet: harborfreight.com/38-in-drive-low-profile-ratchet-62328.html
- 10mm Allen Socket: amazon.com/DEWALT-Drive-10mm-Hex-Socket/dp/B01LY3PZPC
- Silicone Paste: amazon.com/3M-08946-Clear-Silicone-Paste/dp/B005RNEH5O
- 3/8” Torque Wrench: harborfreight.com/38-in-drive-click-type-torque-wrench-61276.html
- ½ Bauer Impact Gun: harborfreight.com/20v-hypermax-lithium-ion-cordless-12-in-impact-wrench-tool-only-63629.html
- 3 Ton Low Profile Jack: harborfreight.com/3-ton-low-profile-rapid-pump-floor-jack-64264.html
- 6 Ton Jack Stands: harborfreight.com/6-ton-steel-jack-stands-62393.html
- Rubber Mallet: harborfreight.com/1-12-lb-rubber-mallet-69076.html
Please note that I am not a professional mechanic, nor am I saying that you must do exactly what I say in this video. Perform these repairs at your own risk! Safety first ;)
This video is made as a guideline to show you how to replace all the seals as well as the bearing on your Honda power steering pump. This video was filmed on a 2004 Honda Accord, but will apply to most Hondas of the 90s and 2000s.
I hope it was helpful!
Parts used in this video:
- Power Steering Pump Gasket Kit (make sure to select your specific year and model when choosing the seal kit): rockauto.com/en/catalog/honda,2004,accord,3.0l+v6,1425428,steering
- Power Steering Shaft Bearing: amazon.com/Genuine-Honda-91048-P2A-003-Ball-Bearing/dp/B00MJ115RU
- Honda Genuine Power Steering Fluid (Recommended): It’s cheapest at the parts department of your local Honda dealer, so go get it there! If not, here’s what I used…
- Prestone Power Steering Fluid for Asian Vehicles: amazon.com/Prestone-AS269-Power-Steering-Vehicles/dp/B007PZNNWK
Tools used in this video:
- 3/8” Deep 6-Point Sockets: harborfreight.com/10-pc-38-in-drive-metric-high-visibility-deep-socket-67867.html
- 3/8” Ratchet: harborfreight.com/38-in-drive-low-profile-ratchet-62328.html
- 10mm Allen Socket: amazon.com/DEWALT-Drive-10mm-Hex-Socket/dp/B01LY3PZPC
- Silicone Paste: amazon.com/3M-08946-Clear-Silicone-Paste/dp/B005RNEH5O
- 3/8” Torque Wrench: harborfreight.com/38-in-drive-click-type-torque-wrench-61276.html
- ½ Bauer Impact Gun: harborfreight.com/20v-hypermax-lithium-ion-cordless-12-in-impact-wrench-tool-only-63629.html
- 3 Ton Low Profile Jack: harborfreight.com/3-ton-low-profile-rapid-pump-floor-jack-64264.html
- 6 Ton Jack Stands: harborfreight.com/6-ton-steel-jack-stands-62393.html
- Rubber Mallet: harborfreight.com/1-12-lb-rubber-mallet-69076.html
Please note that I am not a professional mechanic, nor am I saying that you must do exactly what I say in this video. Perform these repairs at your own risk! Safety first ;)
