Uploaded April 2016 | Updated September 2026, 5 hours ago
Hi this is my take on a homemade table saw, router table and inverted jigsaw, I built all 3 into the same table to save on space
I am very pleased with the results and would recommend making one yourself
The table top is 100cm by 80cm, I didn’t use any specific measurements for the box I just built it round the tools. The tools I used are a Black and Decker circular saw KS64, a Bosch router POF 500A, and a Black and Decker jigsaw KS 633E
During the build and filming allot of the cutting gluing and general preparation was done off camera to speed up the video
00:00 Intro
00:27 Starting the build
01:48 Building the main box
02:51 Fitting flush rulers
04:40 Fitting the inverted jigsaw
06:13 Fitting the router
08:57 Sorting out the electrics
09:54 Making the internal storage compartments
10:43 Making the fence and runners
12:10 Fitting the fence
14:25 Testing
Please consider donating by paypal as it will help fund future projects
paypal.com/donate?hosted_button_id=93QPNNXVKMUBG
If you can’t donate please leave a comment, it really helps me out in the algorithm
My camera gear
Canon G7X goo.gl/hElOVh
Canon 70D goo.gl/d8Rilm
Rode VIDEOMIC PRO goo.gl/9l8fvX
Rode Deadcat Windshield goo.gl/tHTncw
Canon 10-22 lens goo.gl/A81rjM
Canon 18-200 lens goo.gl/MOInDa
GoPro HERO4 black goo.gl/dc8wez
Joby GorillaPod goo.gl/Tz9aDn
XCSOURCE tripod goo.gl/nhOQmX
"Pulse"
Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons.org/licenses/by/3.0
Hi this is my take on a homemade table saw, router table and inverted jigsaw, I built all 3 into the same table to save on space
I am very pleased with the results and would recommend making one yourself
The table top is 100cm by 80cm, I didn’t use any specific measurements for the box I just built it round the tools. The tools I used are a Black and Decker circular saw KS64, a Bosch router POF 500A, and a Black and Decker jigsaw KS 633E
During the build and filming allot of the cutting gluing and general preparation was done off camera to speed up the video
00:00 Intro
00:27 Starting the build
01:48 Building the main box
02:51 Fitting flush rulers
04:40 Fitting the inverted jigsaw
06:13 Fitting the router
08:57 Sorting out the electrics
09:54 Making the internal storage compartments
10:43 Making the fence and runners
12:10 Fitting the fence
14:25 Testing
Please consider donating by paypal as it will help fund future projects
paypal.com/donate?hosted_button_id=93QPNNXVKMUBG
If you can’t donate please leave a comment, it really helps me out in the algorithm
My camera gear
Canon G7X goo.gl/hElOVh
Canon 70D goo.gl/d8Rilm
Rode VIDEOMIC PRO goo.gl/9l8fvX
Rode Deadcat Windshield goo.gl/tHTncw
Canon 10-22 lens goo.gl/A81rjM
Canon 18-200 lens goo.gl/MOInDa
GoPro HERO4 black goo.gl/dc8wez
Joby GorillaPod goo.gl/Tz9aDn
XCSOURCE tripod goo.gl/nhOQmX
"Pulse"
Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons.org/licenses/by/3.0
