Uploaded September 2026 | Updated November 2026, 3 days ago
Today we're taking a look at a strange HVAC problem on a 2011 Mazda 3. Customer complaint is that the A/C is not working properly and the blower motor only works on certain speed settings. The vehicle had already been looked at by another shop, so we start from scratch with scan data, a wiring diagram, and basic circuit analysis to figure out how these systems are connected.
Along the way we cover ground-side blower motor control, pull-up and pull-down circuits, voltage measurements, blower motor amperage, inrush current, and one of our favorite diagnostic techniques: using a test light to safely bypass a switch input circuit and see how the module responds.
If switch inputs, pull-up/pull-down circuits, and bypass testing are areas you want to get stronger with, we cover these concepts in much greater detail on our website, ScannerDanner Premium. The lessons on switch input bypass testing show you how to identify these circuits, understand what the computer is looking for, and safely manipulate the signal during diagnosis.
Check out our website for the complete catalogue of lectures and case studies!
π§ Looking for Deeper Training?
Whether you're a DIYer, an aspiring tech, or a working technician, ScannerDanner Premium gives you in-depth diagnostic training built around real testing and real troubleshooting:
π Join Here β 14 Days for $1
scannerdanner.com/join-scannerdanner-premium.html
On ScannerDanner Premium, you'll get:
*In-depth classroom lectures based on the material in my book
*Case studies with real vehicles brought into class
*Troubleshooting using proven diagnostic methods
*Access to our private forum
*Fundamental training in automotive electrical, electronics, and drivability diagnostics
π Want to Learn More About Diagnostics?
Check out my field manual, Engine Performance Diagnostics, available as both an eBook and paperback at:
π https://linktr.ee/scannerdanner
ScannerDanner Tools:
https://linktr.ee/scannerdanner
β οΈ Disclaimer:
ScannerDanner LLC is not responsible for misuse, unauthorized changes, or incorrect application of any information provided. Always follow proper safety protocols when using tools, equipment, or procedures discussed in this video. Use this content at your own risk.
00:00 - Strange A/C and blower motor symptoms
02:08 - Checking scan data and A/C request
04:24 - Checking for trouble codes
05:33 - Blower motor circuit analysis
10:48 - Testing the switch input signal
11:14 - Voltage readings on the signal circuit
12:04 - Bypass testing with a test light
13:27 - Disconnecting the blower circuit
13:56 - Understanding the pull-up / pull-down circuit
16:00 - Repair considerations and blower motor labor
16:58 - Inspecting the component
18:53 - Resistance testing
20:28 - Planning blower motor current testing
21:01 - Alternate ways to test the circuit
22:29 - Verifying all blower speeds and A/C operation
23:55 - Blower motor amperage testing
28:48 - One more important circuit test
29:57 - Understanding the A/C feedback signal
31:32 - Signal voltage and computer thresholds
33:16 - Why blower current affects the signal voltage
34:51 - Final circuit breakdown
Today we're taking a look at a strange HVAC problem on a 2011 Mazda 3. Customer complaint is that the A/C is not working properly and the blower motor only works on certain speed settings. The vehicle had already been looked at by another shop, so we start from scratch with scan data, a wiring diagram, and basic circuit analysis to figure out how these systems are connected.
Along the way we cover ground-side blower motor control, pull-up and pull-down circuits, voltage measurements, blower motor amperage, inrush current, and one of our favorite diagnostic techniques: using a test light to safely bypass a switch input circuit and see how the module responds.
If switch inputs, pull-up/pull-down circuits, and bypass testing are areas you want to get stronger with, we cover these concepts in much greater detail on our website, ScannerDanner Premium. The lessons on switch input bypass testing show you how to identify these circuits, understand what the computer is looking for, and safely manipulate the signal during diagnosis.
Check out our website for the complete catalogue of lectures and case studies!
π§ Looking for Deeper Training?
Whether you're a DIYer, an aspiring tech, or a working technician, ScannerDanner Premium gives you in-depth diagnostic training built around real testing and real troubleshooting:
π Join Here β 14 Days for $1
scannerdanner.com/join-scannerdanner-premium.html
On ScannerDanner Premium, you'll get:
*In-depth classroom lectures based on the material in my book
*Case studies with real vehicles brought into class
*Troubleshooting using proven diagnostic methods
*Access to our private forum
*Fundamental training in automotive electrical, electronics, and drivability diagnostics
π Want to Learn More About Diagnostics?
Check out my field manual, Engine Performance Diagnostics, available as both an eBook and paperback at:
π https://linktr.ee/scannerdanner
ScannerDanner Tools:
https://linktr.ee/scannerdanner
β οΈ Disclaimer:
ScannerDanner LLC is not responsible for misuse, unauthorized changes, or incorrect application of any information provided. Always follow proper safety protocols when using tools, equipment, or procedures discussed in this video. Use this content at your own risk.
00:00 - Strange A/C and blower motor symptoms
02:08 - Checking scan data and A/C request
04:24 - Checking for trouble codes
05:33 - Blower motor circuit analysis
10:48 - Testing the switch input signal
11:14 - Voltage readings on the signal circuit
12:04 - Bypass testing with a test light
13:27 - Disconnecting the blower circuit
13:56 - Understanding the pull-up / pull-down circuit
16:00 - Repair considerations and blower motor labor
16:58 - Inspecting the component
18:53 - Resistance testing
20:28 - Planning blower motor current testing
21:01 - Alternate ways to test the circuit
22:29 - Verifying all blower speeds and A/C operation
23:55 - Blower motor amperage testing
28:48 - One more important circuit test
29:57 - Understanding the A/C feedback signal
31:32 - Signal voltage and computer thresholds
33:16 - Why blower current affects the signal voltage
34:51 - Final circuit breakdown





![Injector Balance Testing [Timer Tool vs Picoscope] Clip from upcoming video!
Full video coming out 11-1-25 at 12:00 EST I was shocked by what we found!
π Want to Learn More About Diagnostics?
Check out my field manual, Engine Performance Diagnostics, available as both an eBook and paperback at:
π https://linktr.ee/scannerdanner
π§ Looking for Deeper Training?
Whether youre a DIYer, an aspiring tech, or a professional looking to sharpen your skills, join ScannerDanner Premium for next-level diagnostics training:
π Join Here β 14 Days for $1
https://www.scannerdanner.com/join-scannerdanner-premium.html
On ScannerDanner Premium, youll get:
*In-depth classroom lectures straight from my book
*Exclusive case studies with live vehicles pulled into class
*Real-time troubleshooting using proven methods
*Post help requests on our forum
*Fundamental training on diagnosing automotive electrical and electronics systems.
ScannerDanner Tools:
https://linktr.ee/scannerdanner
β οΈ Disclaimer:
ScannerDanner LLC is not responsible for misuse, unauthorized changes, or incorrect application of any information provided. Always follow proper safety protocols when using tools, equipment, or procedures discussed in this video. Use this content at your own risk. Injector Balance Testing [Timer Tool vs Picoscope] Clip from upcoming video!](https://i.ytimg.com/vi/QuJDRNuFvS0/mqdefault.jpg)

![Opposite Fuel Trims: Bank 1 Negative, Bank 2 Positive [Final]
Part 1 https://youtu.be/J4-5eAsbgCw
Part 2
https://youtu.be/iguLgNhavAs
#picoscope
#wps500
π Want to Learn More About Diagnostics?
Check out my field manual, Engine Performance Diagnostics, available as both an eBook and paperback at:
π https://linktr.ee/scannerdanner
π§ Looking for Deeper Training?
Whether youre a DIYer, an aspiring tech, or a professional looking to sharpen your skills, join ScannerDanner Premium for next-level diagnostics training:
π Join Here β 14 Days for $1
https://www.scannerdanner.com/join-scannerdanner-premium.html
On ScannerDanner Premium, youll get:
*In-depth classroom lectures straight from my book
*Exclusive case studies with live vehicles pulled into class
*Real-time troubleshooting using proven methods
*Post help requests on our forum
*Fundamental training on diagnosing automotive electrical and electronics systems.
ScannerDanner Tools:
https://linktr.ee/scannerdanner
β οΈ Disclaimer:
ScannerDanner LLC is not responsible for misuse, unauthorized changes, or incorrect application of any information provided. Always follow proper safety protocols when using tools, equipment, or procedures discussed in this video. Use this content at your own risk. Opposite Fuel Trims: Bank 1 Negative, Bank 2 Positive [Final]](https://i.ytimg.com/vi/RuCDEpLZH0g/mqdefault.jpg)


