Heres how to renovate a surface finished with Oil Plus 2C! More info in the description! @rubiomonocoatusa
Heres how to renovate a surface finished with Oil Plus 2C! More info in the description!  @rubiomonocoatusa
Uploaded July 2026 | Updated November 2026, 1 day ago
A few weeks back, Sedge visited with Brian of Indy Urban Hardwood, who built this beautiful live-edge desk over six years ago. No maintenance had been performed on the piece, so it was time for a renovation!

How to renovate furniture finished with Oil Plus 2C:
1. Vacuum/remove any debris from the table, then clean with Surface Care Spray.
2. Lightly abrade the surface with a maroon pad.
3. Vacuum the surface thoroughly and wipe it down with a damp towel.
4. Mix up Oil Plus 2C at the normal 3:1 ratio in the original color used.
5. Apply Oil Plus 2C like normal.
6. Allow the oil to react on the surface for at least 5 minutes.
7. Remove the excess with a clean terry cloth.
8. Allow to dry for 24 hours, full curing takes place after 5 days!

For detailed step-by-step instructions, check out our help center on our website!
Heres how to renovate a surface finished with Oil Plus 2C! More info in the description!Holiday prep is in full swing, but are you forgetting this task? More in the description!๐——๐—ถ๐˜€๐—ฐ๐—ผ๐˜ƒ๐—ฒ๐—ฟ ๐—Ÿ๐—ถ๐—ด๐—ต๐˜ ๐—ฆ๐—ฎ๐—ป๐—ฑ & ๐—ฃ๐—ฟ๐—ฎ๐—ถ๐—ฟ๐—ถ๐—ฒ ๐——๐˜‚๐˜€๐˜, 2 new colors in the DuroGrit range!Curious about Fumed? Learn more in the related video! #rubiomonocatLearn how to properly apply SheenPlus! #rubiomonocoatYou can really see all those aged details Pre-Aging created! #rubiomonocoatSheen = Enhanced, more info in the description! #rubiomonocoatMeet the one coat wonder! Learn more in the description! #rubiomonocoatKeep those wood decks finished with DuroGrit squeaky clean this spring! #rubiomonocoatWhat does a flooring pro with decades on the job look for in a finish? #rubiomonocoatCerusing 101 with Sedge! #rubiomonocoatSpreader or Applicator Pad?! Watch this to learn more! #rubiomonocoat
Rubio Monocoat USA |

Here's how to renovate a surface finished with Oil Plus 2C! More info in the description!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER