Hemming with Flatlock Stitch on Serger @SookieSews
Hemming with Flatlock Stitch on Serger  @SookieSews
Uploaded May 2026 | Updated November 2026, 1 hour ago
Hem your pants with a flatlock stitch and barely see the stitches 🐝

• Remove the old hem and match thread, slightly darker blends better
• Set to 2 thread flatlock, wide, longest stitch length
• Install the subsidiary looper, thread lower looper and needle
• Place threads under presser foot and swing to the back
• Measure and cut a 2 inch hem, press well
• Turn pants wrong side out
• Cut a 2 inch landing zone so the blade does not catch early
• Slide the fold just to the right of the needle, lower foot, sink needle
• Stitch in the round all the way around
• Cross over your stitches by half an inch, then clip tails
• Pop open the flatlock, give it a press 💛

This method is what I call the Roundabout, and once you try it you will wonder why you ever hemmed any other way. Beautiful, barely there stitches every single time with your serger. 🧵

Follow me for more serger tips every week 🐝

#sergercoach #serger #sergersewing #yearoftheserger #sergertips
Hemming with Flatlock Stitch on SergerSleeve Insertion with a Serger6 Steps in 6 MinutesThis Machine Can Do More Than You Think!Need BOTH? Serger and Coverstitch machineThat’s NOT a Serger! Understanding Sergers, Coverstitch & Combo MachinesHeres what no one tells you about tensions that fixes 90% of the issuesThe One Serger Needle Rule You Should Never BreakI turned 50…and did something I never thought I’d do. 🐝🐞How to remove chainstitchGet perfect seam allowance on a serger NOWDo this instead of scrolling next time you cant sleep
Sookie Sews |

Hemming with Flatlock Stitch on Serger

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER