Uploaded October 2026 | Updated November 2026, 2 days ago
Planning a full studio build? Apply for Pro Studio Consulting and we'll plan your treatment together: acousticsinsider.com/pro-studio-consulting
Or start with my free 5-step treatment framework: acousticsinsider.com/home-studio-treatment-framework
Grischa is a mix and mastering engineer from southern Germany. Over three years he turned an old basement into a 7.1.4 Dolby Atmos room and built all of the acoustic treatment himself, with help from his family. I worked with him on the treatment plan. mbakustik designed the room shell and later calibrated the Atmos system.
In this video he shares what the build took and roughly what it cost. He also talks about working in the room two years later. His mixes now translate without surprises, and the phantom center sounds like a physical speaker in front of him.
Not everything went to plan. The room ended up almost a little too dead, and a speaker boundary problem only showed up once everything else was fixed. The official Dolby calibration also found that Genelec GLM had set his rear speakers too loud.
If you're thinking about a full DIY studio build, Atmos or stereo, this gives you an honest picture of what you're signing up for.
CHAPTERS:
0:00 A full DIY Dolby Atmos build
0:40 Meet Grischa
2:10 Why build a new Atmos studio
5:48 Shell design vs acoustic treatment
6:37 Biggest worries: a steel beam and a tilted ceiling
8:29 How Grischa found Acoustics Insider
9:17 Building frames, mineral wool and fabric profiles
11:31 Room modes at 30 Hz and 40 Hz
12:05 The first sign it would work
13:12 What it cost
15:01 How the room sounds now
16:20 Why he mixes at low volume
16:59 Phantom center and localization
18:33 Almost too dead: adding liveliness back
19:59 Getting used to the room in one mix
21:33 Why he mixes in stereo first
24:17 Checking mixes outside the studio
26:12 Dolby calibration with mbakustik
27:44 SBIR at the front wall
29:15 Genelec GLM set the rears too loud
29:54 Tuning vs toning: more bass, less 2.3 kHz
33:02 Is a DIY Atmos studio worth it?
35:54 Final words
RESOURCES:
mbakustik (room shell design and Dolby Atmos calibration): mbakustik.de/en
Genelec GLM calibration software: genelec.com/glm
Merlijn van Veen (sound system design): https://www.merlijnvanveen.nl/en/
Whenever you're ready, there are 5 ways I can help you:
→ Speaker Placement Workshop (FREE)
Perfect first step for new studios or fixing low-end issues
acousticsinsider.com/phantom-speaker-test
→ Build A Better Bass Trap
Get professional low-end control without the "dead" room sound
acousticsinsider.com/build-a-better-bass-trap
→ Pro Studio Consulting
Personalized guidance for your complete studio transformation
acousticsinsider.com/pro-studio-consulting
→ Treatment Essentials Bundle
Complete system for speaker placement, bass traps & panel placement
acousticsinsider.com/acoustic-treatment-essentials
→ My Thomann Gear Picks
Studio monitors, interfaces, and acoustics products I actually use and recommend
thomann.de/de/thlpg_pwro85f8lv.html
ABOUT ACOUSTICS INSIDER:
I'm Jesco, an aerospace engineer turned sound nerd and professional mixing engineer with over a decade of experience. Through Acoustics Insider, I teach home studio acoustic treatment techniques that actually work without all the voodoo. My goal is simple: help you get professional-sounding results from your home studio without breaking the bank or falling for expensive myths.
Planning a full studio build? Apply for Pro Studio Consulting and we'll plan your treatment together: acousticsinsider.com/pro-studio-consulting
Or start with my free 5-step treatment framework: acousticsinsider.com/home-studio-treatment-framework
Grischa is a mix and mastering engineer from southern Germany. Over three years he turned an old basement into a 7.1.4 Dolby Atmos room and built all of the acoustic treatment himself, with help from his family. I worked with him on the treatment plan. mbakustik designed the room shell and later calibrated the Atmos system.
In this video he shares what the build took and roughly what it cost. He also talks about working in the room two years later. His mixes now translate without surprises, and the phantom center sounds like a physical speaker in front of him.
Not everything went to plan. The room ended up almost a little too dead, and a speaker boundary problem only showed up once everything else was fixed. The official Dolby calibration also found that Genelec GLM had set his rear speakers too loud.
If you're thinking about a full DIY studio build, Atmos or stereo, this gives you an honest picture of what you're signing up for.
CHAPTERS:
0:00 A full DIY Dolby Atmos build
0:40 Meet Grischa
2:10 Why build a new Atmos studio
5:48 Shell design vs acoustic treatment
6:37 Biggest worries: a steel beam and a tilted ceiling
8:29 How Grischa found Acoustics Insider
9:17 Building frames, mineral wool and fabric profiles
11:31 Room modes at 30 Hz and 40 Hz
12:05 The first sign it would work
13:12 What it cost
15:01 How the room sounds now
16:20 Why he mixes at low volume
16:59 Phantom center and localization
18:33 Almost too dead: adding liveliness back
19:59 Getting used to the room in one mix
21:33 Why he mixes in stereo first
24:17 Checking mixes outside the studio
26:12 Dolby calibration with mbakustik
27:44 SBIR at the front wall
29:15 Genelec GLM set the rears too loud
29:54 Tuning vs toning: more bass, less 2.3 kHz
33:02 Is a DIY Atmos studio worth it?
35:54 Final words
RESOURCES:
mbakustik (room shell design and Dolby Atmos calibration): mbakustik.de/en
Genelec GLM calibration software: genelec.com/glm
Merlijn van Veen (sound system design): https://www.merlijnvanveen.nl/en/
Whenever you're ready, there are 5 ways I can help you:
→ Speaker Placement Workshop (FREE)
Perfect first step for new studios or fixing low-end issues
acousticsinsider.com/phantom-speaker-test
→ Build A Better Bass Trap
Get professional low-end control without the "dead" room sound
acousticsinsider.com/build-a-better-bass-trap
→ Pro Studio Consulting
Personalized guidance for your complete studio transformation
acousticsinsider.com/pro-studio-consulting
→ Treatment Essentials Bundle
Complete system for speaker placement, bass traps & panel placement
acousticsinsider.com/acoustic-treatment-essentials
→ My Thomann Gear Picks
Studio monitors, interfaces, and acoustics products I actually use and recommend
thomann.de/de/thlpg_pwro85f8lv.html
ABOUT ACOUSTICS INSIDER:
I'm Jesco, an aerospace engineer turned sound nerd and professional mixing engineer with over a decade of experience. Through Acoustics Insider, I teach home studio acoustic treatment techniques that actually work without all the voodoo. My goal is simple: help you get professional-sounding results from your home studio without breaking the bank or falling for expensive myths.










