Uploaded May 2026 | Updated November 2026, 3 hours ago
Adding hardfacing to the underside of this skid steer bucket to help fight wear and extend the life of the cutting edge and bottom skin. Running stick rod and building up the high-wear areas before this bucket goes back to work. A lot of people wait until the steel is paper thin — this is the kind of maintenance that helps avoid bigger repairs later on. Plenty of arc time, sparks, grinding, fit-up, and real-world welding in this one. Thanks for watching and don’t forget to subscribe for more welding and fabrication content.
📢 Gear I Use:
✅Hypertherm Powermax65 SYNC hypertherm.com/hypertherm/powermax/powermax65-sync
✅ Optrel Helix Welding Helmet: optrel.us/product/helix-pure-air-clt/?srsltid=AfmBOopztvmrEvbiAucbqlLVFcze089z-ZuNB8G9j1WYc0BR8H99SHiw
✅ Optrel PAPR optrel.us/product/e3000x-papr
✅ Use code LUND30 at checkout and save 30% at OPTREL optrel.us
✅ Plymovent Fume Extractor plymovent.com/en/products/mobilepro
🎥 POPULAR VIDEOS HERE:
youtube.com/@BrandonLund/videos?view=0&sort=p&shelf_id=4
🎥 LEARN TO WELD AND FABRICATION VIDEOS HERE:
youtube.com/playlist?list=PLfbf78fMz9VqxPZTT-xmwdcrHVa7ML-ft
yeswelder🔥 YesWelder Coupon yeswelder.com/?ref=BRANDONLUND
Use Coupon Code: yeswelder.com/discount/BRANDONLUND
🔥 Welding Coupons weldmetalsonline.com/?ref=BRANDONLUND
weldmetalsonline.com/discount/BRANDONLUND?ref=BRANDONLUND
More of the Tools and Gear I Use
🔴 amazon.com/shop/brandonlund
Evolution Mag Drill amzn.to/3s0mnbI USE BLUND5 at checkout to save $
Evolution Heavy Duty 15" Metal Cutting Saw amzn.to/34gA9yD Use BLUND5
Evolution Rage5s 10" multi-material Table Saw amzn.to/3ol3eAb
Center Punch amzn.to/33994ua
Metal Scribe amzn.to/3idI4y6
Relton Option 1 Cutting Fluid amzn.to/3cM3vFh
Chipping Hammer (the best):
Any commission earned from the above affiliate links goes directly towards helping to support the channel.
For Business Inquiries: LundDIYBuilds@gmail.com
Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any tools or equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Adding hardfacing to the underside of this skid steer bucket to help fight wear and extend the life of the cutting edge and bottom skin. Running stick rod and building up the high-wear areas before this bucket goes back to work. A lot of people wait until the steel is paper thin — this is the kind of maintenance that helps avoid bigger repairs later on. Plenty of arc time, sparks, grinding, fit-up, and real-world welding in this one. Thanks for watching and don’t forget to subscribe for more welding and fabrication content.
📢 Gear I Use:
✅Hypertherm Powermax65 SYNC hypertherm.com/hypertherm/powermax/powermax65-sync
✅ Optrel Helix Welding Helmet: optrel.us/product/helix-pure-air-clt/?srsltid=AfmBOopztvmrEvbiAucbqlLVFcze089z-ZuNB8G9j1WYc0BR8H99SHiw
✅ Optrel PAPR optrel.us/product/e3000x-papr
✅ Use code LUND30 at checkout and save 30% at OPTREL optrel.us
✅ Plymovent Fume Extractor plymovent.com/en/products/mobilepro
🎥 POPULAR VIDEOS HERE:
youtube.com/@BrandonLund/videos?view=0&sort=p&shelf_id=4
🎥 LEARN TO WELD AND FABRICATION VIDEOS HERE:
youtube.com/playlist?list=PLfbf78fMz9VqxPZTT-xmwdcrHVa7ML-ft
yeswelder🔥 YesWelder Coupon yeswelder.com/?ref=BRANDONLUND
Use Coupon Code: yeswelder.com/discount/BRANDONLUND
🔥 Welding Coupons weldmetalsonline.com/?ref=BRANDONLUND
weldmetalsonline.com/discount/BRANDONLUND?ref=BRANDONLUND
More of the Tools and Gear I Use
🔴 amazon.com/shop/brandonlund
Evolution Mag Drill amzn.to/3s0mnbI USE BLUND5 at checkout to save $
Evolution Heavy Duty 15" Metal Cutting Saw amzn.to/34gA9yD Use BLUND5
Evolution Rage5s 10" multi-material Table Saw amzn.to/3ol3eAb
Center Punch amzn.to/33994ua
Metal Scribe amzn.to/3idI4y6
Relton Option 1 Cutting Fluid amzn.to/3cM3vFh
Chipping Hammer (the best):
Any commission earned from the above affiliate links goes directly towards helping to support the channel.
For Business Inquiries: LundDIYBuilds@gmail.com
Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any tools or equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!










