Uploaded August 2026 | Updated November 2026, 3 hours ago
Run a PLC start-stop-jog program with a gamepad in the free ACC PLC Simulator โ A starts and seals in, B stops, X jogs. No mouse or keyboard needed.
โก QUICK ANSWER
In this hands-on demo, the whole start-stop-jog motor program in the ACC PLC Simulator's control-panel scene is run with a gamepad instead of the mouse or keyboard. The button mapping is simple. Press A for start, and the motor and its run pilot light turn on. Because it is a proper start-stop circuit, when you release A the seal-in holds, so the motor stays running on its own. Press B for stop and the motor stops. Press X for jog, and the motor runs only while you hold the button, then stops the moment you let go. That start-versus-jog difference is the key PLC idea underneath the fun: start is latched by a seal-in rung so a momentary press keeps the motor on, while jog is momentary and only runs while held. The point of the demo is that you can drive the entire start, stop and jog program from a controller without ever touching the mouse or keyboard. It all runs in the free ACC PLC Simulator, in your browser, with no install, so you can try the same control-panel scene yourself. The simulator link is below.
๐ฎ THE GAMEPAD MAPPING
โถ A = START โ the motor and run pilot light turn on
โถ Release A โ the SEAL-IN holds, so the motor stays running
โถ B = STOP โ the motor stops
โถ X = JOG โ the motor runs only while you hold the button
โถ Run the whole start-stop-jog program without touching the mouse or keyboard
๐น๏ธ TRY IT FREE โ THE ACC PLC SIMULATOR
accautomation.ca/simulator
(Browser-based, no install โ open the control-panel scene and try it with a gamepad)
๐ FULL WRITTEN TUTORIAL โ CONTROL-PANEL SCENE
accautomation.ca/how-to-use-the-acc-plc-simulator-control-panel-scene-tutorial
๐ WHAT YOU'LL LEARN
โ How to run a start-stop-jog program with a gamepad
โ The button mapping: A start, B stop, X jog
โ How the seal-in holds the motor on after you release Start
โ Why Jog runs only while the button is held
โ How it all runs free in the ACC PLC Simulator, no install
โ FREQUENTLY ASKED
Q: How do you control the start-stop-jog program with a gamepad?
A: Press A to start (the motor and run light come on and seal in), B to stop, and X to jog (runs only while held). You can run the whole program from the controller without touching the mouse or keyboard. Try it in the free ACC PLC Simulator (link above).
Q: Why does the motor stay on after I release Start, but not Jog?
A: Start is latched by a seal-in rung, so a momentary press keeps the motor running until Stop. Jog has no seal-in, so it runs only while you hold the button โ the standard difference between start and jog.
๐ Try it free: accautomation.ca/simulator
๐ MORE RESOURCES
โถ Gamepad 3D Scene Control (orbit, zoom, press): youtube.com/shorts/KB7i6oLKFl4
โถ Build Start-Stop-Jog in the Control-Panel Scene: youtube.com/shorts/tLT4yj5R7xY
โถ Control-panel scene written guide: accautomation.ca/how-to-use-the-acc-plc-simulator-control-panel-scene-tutorial
โถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โถ Free eBooks: accautomation.ca (subscribe for download)
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCSimulator #Gamepad #StartStopJog #MotorControl #Shorts
Regards,
Garry
ACC Automation
accautomation.ca
Run a PLC start-stop-jog program with a gamepad in the free ACC PLC Simulator โ A starts and seals in, B stops, X jogs. No mouse or keyboard needed.
โก QUICK ANSWER
In this hands-on demo, the whole start-stop-jog motor program in the ACC PLC Simulator's control-panel scene is run with a gamepad instead of the mouse or keyboard. The button mapping is simple. Press A for start, and the motor and its run pilot light turn on. Because it is a proper start-stop circuit, when you release A the seal-in holds, so the motor stays running on its own. Press B for stop and the motor stops. Press X for jog, and the motor runs only while you hold the button, then stops the moment you let go. That start-versus-jog difference is the key PLC idea underneath the fun: start is latched by a seal-in rung so a momentary press keeps the motor on, while jog is momentary and only runs while held. The point of the demo is that you can drive the entire start, stop and jog program from a controller without ever touching the mouse or keyboard. It all runs in the free ACC PLC Simulator, in your browser, with no install, so you can try the same control-panel scene yourself. The simulator link is below.
๐ฎ THE GAMEPAD MAPPING
โถ A = START โ the motor and run pilot light turn on
โถ Release A โ the SEAL-IN holds, so the motor stays running
โถ B = STOP โ the motor stops
โถ X = JOG โ the motor runs only while you hold the button
โถ Run the whole start-stop-jog program without touching the mouse or keyboard
๐น๏ธ TRY IT FREE โ THE ACC PLC SIMULATOR
accautomation.ca/simulator
(Browser-based, no install โ open the control-panel scene and try it with a gamepad)
๐ FULL WRITTEN TUTORIAL โ CONTROL-PANEL SCENE
accautomation.ca/how-to-use-the-acc-plc-simulator-control-panel-scene-tutorial
๐ WHAT YOU'LL LEARN
โ How to run a start-stop-jog program with a gamepad
โ The button mapping: A start, B stop, X jog
โ How the seal-in holds the motor on after you release Start
โ Why Jog runs only while the button is held
โ How it all runs free in the ACC PLC Simulator, no install
โ FREQUENTLY ASKED
Q: How do you control the start-stop-jog program with a gamepad?
A: Press A to start (the motor and run light come on and seal in), B to stop, and X to jog (runs only while held). You can run the whole program from the controller without touching the mouse or keyboard. Try it in the free ACC PLC Simulator (link above).
Q: Why does the motor stay on after I release Start, but not Jog?
A: Start is latched by a seal-in rung, so a momentary press keeps the motor running until Stop. Jog has no seal-in, so it runs only while you hold the button โ the standard difference between start and jog.
๐ Try it free: accautomation.ca/simulator
๐ MORE RESOURCES
โถ Gamepad 3D Scene Control (orbit, zoom, press): youtube.com/shorts/KB7i6oLKFl4
โถ Build Start-Stop-Jog in the Control-Panel Scene: youtube.com/shorts/tLT4yj5R7xY
โถ Control-panel scene written guide: accautomation.ca/how-to-use-the-acc-plc-simulator-control-panel-scene-tutorial
โถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โถ Free eBooks: accautomation.ca (subscribe for download)
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCSimulator #Gamepad #StartStopJog #MotorControl #Shorts
Regards,
Garry
ACC Automation
accautomation.ca










