Uploaded December 2020 | Updated November 2026, 2 hours ago
With the new cycle starting, I thought I'd share a resource I use and things I've learned over the last two cycles.
Link to the spaceweather page:
swpc.noaa.gov/communities/space-weather-enthusiasts
Link to the NASA page on the Carrington event:
nasaspaceflight.com/2020/08/carrington-event-warning
If you like my videos, please subscribe here:
youtube.com/user/loughkb?sub_confirmation=1
If you want me to keep making more videos like this, consider becoming my patron at Patreon: patreon.com/kb9rlw
Discuss this and other videos on Facebook:
facebook.com/kb9rlw
With the new cycle starting, I thought I'd share a resource I use and things I've learned over the last two cycles.
Link to the spaceweather page:
swpc.noaa.gov/communities/space-weather-enthusiasts
Link to the NASA page on the Carrington event:
nasaspaceflight.com/2020/08/carrington-event-warning
If you like my videos, please subscribe here:
youtube.com/user/loughkb?sub_confirmation=1
If you want me to keep making more videos like this, consider becoming my patron at Patreon: patreon.com/kb9rlw
Discuss this and other videos on Facebook:
facebook.com/kb9rlw

![Ham Radio and Linux - Building SDR++ on the Raspberry Pi from source code.
Link to the github page:
https://github.com/AlexandreRouma/SDRPlusPlus
My modified version of the script:
#!/bin/sh
# Script authored by Alexandre Rouma, tested and modified by Kevin Loughin, KB9RLW, Sept 15th 2021
set -e
[ $(id -u) = 0 ] && echo Please do not run this script as root && exit 100
echo Installing dependencies
sudo apt update
sudo apt install -y build-essential cmake git libfftw3-dev libglfw3-dev libglew-dev libvolk1-dev libsoapysdr-dev libairspyhf-dev libairspy-dev libiio-dev libad9361-dev librtaudio-dev libhackrf-dev librtlsdr-dev libbladerf-dev liblimesuite-dev p7zip-full wget
# get the source
cd ~/Desktop
git clone https://github.com/AlexandreRouma/SDRPlusPlus
cd SDRPlusPlus
echo Preparing build
mkdir -p build
cd build
cmake .. -DOPT_BUILD_LIMESDR_SOURCE=ON -DOPT_BUILD_SDRPLAY_SOURCE=ON
echo Building
make
echo Installing
sudo make install
echo Done! Ham Radio and Linux - Building SDR++ on the Raspberry Pi from source code.](https://i.ytimg.com/vi/Cjf9P8a1uTQ/mqdefault.jpg)








