Uploaded January 2026 | Updated September 2026, 1 week ago
12' stainless QC1 low flow propane hose with 3/8" SAE threaded flare fitting to 1/4"diameter quick connect RV/full flow/high flow adapter & gauge for Halo 1B griddle.
Hose: https://a.co/d/9SogM8a
Adapter: https://a.co/d/9nNy6O0
MCAMPAS 1/4" Propane Quick Connect Adapter Kit Converter 3/8" Female Flare Propane Hose to Gas Grill Quick Connection
Part #: X002UYQ37J
Or, ideally, buy a hose with a 1/4" RV/full flow style quick connect built in. However, the hose I chose may provide more flow at low pressures due to the larger 3/8 SAE flare fitting, and my setup allows replacement of either the hose or the quick connect fitting. I'm also left with spare parts so I can improvise with locally sourced propane hoses if this hose were to leak. Try not to stress the crimped areas, they can indeed develop a leak there.
I'm planning to relocate the male quick connect fitting so it's recessed inside of the front panel of the griddle with a 90° 3/8" SAE flare fitting, to make the setup more compact, so I can mount it in an airtight aluminum diamond plate box on the rear door.
Shame on Halo products group for not releasing an extended hose or giving us any information on the fittings. This was not easy to figure out! and you can't buy this stuff locally.
12' stainless QC1 low flow propane hose with 3/8" SAE threaded flare fitting to 1/4"diameter quick connect RV/full flow/high flow adapter & gauge for Halo 1B griddle.
Hose: https://a.co/d/9SogM8a
Adapter: https://a.co/d/9nNy6O0
MCAMPAS 1/4" Propane Quick Connect Adapter Kit Converter 3/8" Female Flare Propane Hose to Gas Grill Quick Connection
Part #: X002UYQ37J
Or, ideally, buy a hose with a 1/4" RV/full flow style quick connect built in. However, the hose I chose may provide more flow at low pressures due to the larger 3/8 SAE flare fitting, and my setup allows replacement of either the hose or the quick connect fitting. I'm also left with spare parts so I can improvise with locally sourced propane hoses if this hose were to leak. Try not to stress the crimped areas, they can indeed develop a leak there.
I'm planning to relocate the male quick connect fitting so it's recessed inside of the front panel of the griddle with a 90° 3/8" SAE flare fitting, to make the setup more compact, so I can mount it in an airtight aluminum diamond plate box on the rear door.
Shame on Halo products group for not releasing an extended hose or giving us any information on the fittings. This was not easy to figure out! and you can't buy this stuff locally.
