Guide to Xtrfy M4 Wireless – All settings | Video manual @cherryxtrfy
Guide to Xtrfy M4 Wireless – All settings | Video manual  @cherryxtrfy
Uploaded December 2021 | Updated November 2026, 8 hours ago
Video manual for the Xtrfy M4 Wireless gaming mouse.

00:00 – CONNECT THE MOUSE
Connect the dongle and the cable to the adapter. Plug the cable into a USB port on your computer. Turn the mouse on by sliding the switch on the underside into CPI, RGB or PGDN mode. Your mouse is paired automatically as standard.

00:33 – PAIRING (IF NEEDED)
If your mouse is not automatically paired, here’s how to pair it manually:
1. Unplug the cable/dongle from your computer.
2. Set the switch into PGDN mode (to turn the mouse on).
3. Hold left click + right click + scroll wheel click until the mouse blinks yellow (it’s now in pairing mode).
4. Plug the cable/dongle back into the computer with the mouse close to the dongle (about 1 cm). The mouse will indicate that it's paired by going back to the regular RGB lighting.

01:04 – CHECK BATTERY STATUS
Press and hold both side buttons + left click for 3 seconds. The mouse will then blink, indicating how much battery there is left.

Red light = 0–25% battery.
Orange = 26–50%.
Yellow = 51–75%.
Green = 76–100%.

01:28 – CHARGING
When there is less than 25% left of the battery, the mouse blinks red. Charge it by disconnecting the adapter and dongle from the cable, and plug the cable into the mouse. The mouse blinks orange when charging, and goes back to your selected RGB lighting when fully charged.

01:58 – POLLING RATE
Press the PR button to switch between 125, 500 and 1000 Hz.

02:08 – CPI
Set the switch into CPI mode. Then press the top button repeatedly to adjust your mouse sensitivity.

02:32 – RGB EFFECTS
Set the switch into RGB mode. Then press the top button repeatedly for different LED modes.

02:52 – COLORS
With the switch in RGB mode, choose your own color by pressing the top button + right click.

03:11 – EFFECT SPEED
With the switch in RGB mode, adjust the speed of the LED effects by pressing the top button + left click.

03:26 – BRIGHTNESS
With the switch in RGB mode, press the top button + side button 1 or 2 to increase/decrease the brightness.

03:50 – RGB ON/OFF
Press and hold the top button + scroll click for 3 seconds to turn the LED lighting on or off.

04:07 – USE TOP BUTTON AS PGDN (FOR IN-GAME BINDS)
Set the switch into PGDN mode. The top button is now PGDN, so you can bind it in-game.

04:22 – LIFT-OFF DISTANCE
Press and hold both side buttons + left click + right click for 3 seconds to switch between 1 and 2 mm LOD.

04:43 – DEBOUNCE
Press and hold both side buttons + scroll click for 5 seconds to switch between 2, 4, 8 and 12 ms debounce time.

05:28 – FACTORY RESET
Press and hold both side buttons + right click for 5 seconds to reset all settings.

05:42 – WEIGHT BALANCE
Loosen the two screws (around 1 mm) and then use the screwdriver to push them toward the back or the front. You are now moving the battery to change the weight balance of the mouse. When done, tighten the screws.

06:08 – ADJUST THE SHAPE
Unscrew the three screws to remove the rear part of the shell. Switch to your preferred back shell and screw the mouse back together.


Check out the Xtrfy M4 Wireless at xtrfy.com/mice/m4-wireless



Follow us:

Facebook: facebook.com/xtrfy
Instagram: instagram.com/xtrfy
Twitter: twitter.com/xtrfy
xtrfy.com

#xtrfy #wireless #mouse
Guide to Xtrfy M4 Wireless – All settings | Video manualDreamHack Winter 2022 was INCREDIBLE | Xtrfy aftermovieCHERRY XTRFY – two brands become one | New name & logoReady for something new?Professionals’ choice – f0rest, A1 enhancement kit for mechanical keyboardsGot an H1? Maximize your gaming experience.Xtrfy K5 keyboard explained in 30 seconds – by Hardware Canucks | AdWhat is pitas plan for Ninjas in Pyjamas?Xtrfy GP1 mousepad. Speed and precision.Hear what you can’t see. The Xtrfy H2 gaming headset is out now.Back at the world’s most epic LAN | DreamHack Summer 2022 aftermoviePlay big with the XGP1 XL edition mousepad
CHERRY XTRFY |

Guide to Xtrfy M4 Wireless – All settings | Video manual

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER