Uploaded February 2022 | Updated September 2026, 2 weeks ago

---

There is a lot of way to make an IOT project, for example the simplest one is using GSM GPRS module. It only needs a working sim card, and it also does not require internet or WIFI to send data to cloud. GSM is also an IOT devices to push data to cloud. In this project, we are using GSM GPRS module to control our home appliances remotely.
GSM Smart Home Automation with Motion Detection using Arduino UNO and PIR Motion Sensor can control up to 4 home appliances connected to it. For example, in this project we are using LED bulb to demonstrate the uses of this project. You can also connect and do wiring for any other home appliances.
This project kit also can send a warning alert message to the user when it detects a movement in the detection radius. It will send a warning alert message every time it detects movement and triggers relay 4 on. So, with this configuration you can connect a buzzer or alarm to the system if you want to make it as an alarm system when there is movement in detection radius.

Link for the product:
https://mybotic.com.my/diy-pr06-stem-project-kit-gsm-smart-home-automation-with-motion-detection-using-arduino-uno-and-pir-motion-sensor

#Arduino #smarthomeproject #GSMmodule