Uploaded October 2025 | Updated September 2026, 2 hours ago
INTRODUCING THE OPTIMUS 7 LBP SUPPRESSOR LINEUP
Specifications
------------------------
DUAL-LOK Specs: 7.49" x 19.7oz
TAPER MOUNT Specs: 7.56" x 19.5oz
UTILITY MOUNT Specs: 6.875" x 17.8oz
Diameter: 1.73"
Caliber: .30cal/7.62mm
------------------------
The Optimus® 7 is a .30cal additive manufactured (3D Printed) suppressor optimized for reducing system back pressure over “traditional” suppressors by way of its LBP ECO-FLOW™ baffle design, while maintaining impressive flash and sound reduction. The quad-tine flash hider endcap was painstakingly tuned in conjunction with the low back pressure baffle stack to kill flash at a level almost unseen in other low back pressure suppressors available on the market. The Optimus® 7 is available in three mounting variants: Taper Mount, DUAL-LOK®, and Utility Mount (HUB 1.375×24 TPI); and user’s choice of black or FDE high-temp cerakote finish. This suppressor was optimized for .30cal projectiles such as .308 WIN and .300WM.
The Optimus® 7 is made entirely from ultra-strong 17-4 H900 heat treated stainless steel. The tube body of the printed core is machined during post-production to create a smooth, beautiful exterior absent of the normal printing layers visible in most other printed cans. The blast shield and mount system is machined in-house from 17-4 SS, then laser-welded to the baffle core allowing for easy warranty of the suppressor in the case of a baffle strike or other catastrophic failure. Optimus® 7 suppressors, like all other Griffin suppressors, are warrantied for life under Griffin’s Perpetual Lifetime Warranty™.
Griffin Armament has been designing, prototyping, and printing additive-manufactured suppressors since ~2009, but felt the technology had not become accessible or affordable enough to bring to market a feature-packed sound suppressor at a value-driven price. Recent advancements in 3D metal printing technology has changed this and in response Griffin went full-tilt into designing it’s first line of suppressors manufactured using this technology.
Check out the Griffin Armament Optimus 7 Suppressor and other silencers on the Griffin Armament website!
-----------------------------------------------------
Follow us on other social media!
Instagram: @griffin_armament
Facebook: @griffinarmament
Rumble: @griffinarmament
TikTok: @griffinarmament
Vimeo: @griffinarmament
X: @griffinarmament
#silencer
#suppressor
#guns
#GriffinArmament
#GriffinArmy
INTRODUCING THE OPTIMUS 7 LBP SUPPRESSOR LINEUP
Specifications
------------------------
DUAL-LOK Specs: 7.49" x 19.7oz
TAPER MOUNT Specs: 7.56" x 19.5oz
UTILITY MOUNT Specs: 6.875" x 17.8oz
Diameter: 1.73"
Caliber: .30cal/7.62mm
------------------------
The Optimus® 7 is a .30cal additive manufactured (3D Printed) suppressor optimized for reducing system back pressure over “traditional” suppressors by way of its LBP ECO-FLOW™ baffle design, while maintaining impressive flash and sound reduction. The quad-tine flash hider endcap was painstakingly tuned in conjunction with the low back pressure baffle stack to kill flash at a level almost unseen in other low back pressure suppressors available on the market. The Optimus® 7 is available in three mounting variants: Taper Mount, DUAL-LOK®, and Utility Mount (HUB 1.375×24 TPI); and user’s choice of black or FDE high-temp cerakote finish. This suppressor was optimized for .30cal projectiles such as .308 WIN and .300WM.
The Optimus® 7 is made entirely from ultra-strong 17-4 H900 heat treated stainless steel. The tube body of the printed core is machined during post-production to create a smooth, beautiful exterior absent of the normal printing layers visible in most other printed cans. The blast shield and mount system is machined in-house from 17-4 SS, then laser-welded to the baffle core allowing for easy warranty of the suppressor in the case of a baffle strike or other catastrophic failure. Optimus® 7 suppressors, like all other Griffin suppressors, are warrantied for life under Griffin’s Perpetual Lifetime Warranty™.
Griffin Armament has been designing, prototyping, and printing additive-manufactured suppressors since ~2009, but felt the technology had not become accessible or affordable enough to bring to market a feature-packed sound suppressor at a value-driven price. Recent advancements in 3D metal printing technology has changed this and in response Griffin went full-tilt into designing it’s first line of suppressors manufactured using this technology.
Check out the Griffin Armament Optimus 7 Suppressor and other silencers on the Griffin Armament website!
-----------------------------------------------------
Follow us on other social media!
Instagram: @griffin_armament
Facebook: @griffinarmament
Rumble: @griffinarmament
TikTok: @griffinarmament
Vimeo: @griffinarmament
X: @griffinarmament
#silencer
#suppressor
#guns
#GriffinArmament
#GriffinArmy
