AnotherMaker | Gotek and IDE to SD Adapter in ONE Drive Bay @AnotherMaker | Uploaded April 2021 | Updated October 2024, 5 hours ago.
I wanted to come up with a way to front mount my IDE to SD card adapter without taking up another drive bay. I came up with two ways to do it. I hope you find them useful. Note that the Gotek with the OLED has the Flashfloppy firmware on it. If you're interested in any of these parts, using my links helps the channel.

USA Links (Canada links and design files below)
Gotek Floppy Emulator - amzn.to/3v3aRfE
IDE to SD Adapter - amzn.to/3tzJn0z
5.25 to 3.5 Adapter - amzn.to/3du3jwu
Molex Y Adapters - amzn.to/2QFgQZa
OLED Screen - amzn.to/3n2nPHE
Rotary Encoders - amzn.to/3n51Y2q
USB A to A Cable - amzn.to/3duVzdq (for FlashFloppy Mod)

Canaduh Links
Gotek Emulator - amzn.to/32trtAL
IDE to SD - amzn.to/3n2MA6y
5.25 to 3.5 adapter - amzn.to/3srWfEQ
OLED amzn.to/3dxjjO7
Rotary Encoder - amzn.to/3dtFaGd
USB A to A - amzn.to/32rxSfZ

My 5.25" Drive bay Design - github.com/mudmin/AnotherMaker/tree/master/gotek

Other Resources
FlashFloppy - github.com/keirf/FlashFloppy
Rotary Encoder and OLED Mod - projectspeccy.com/2017/11/03/gotekdvirtual-spectrum-floppy-disk
FlashFloppy A to A Method - Worked WAY easier on Win7 for me - youtube.com/watch?v=yUOyZB9cro4