Uploaded July 2021 | Updated November 2026, 1 hour ago
I wish my wife was as dirty as my solar panels! Ho ho; SNORT! But seriously folks, cleaning solar panels is no laughing matter as this forty minutes of tedium proves. Here, we use a DIY tower platform to undertake the DIY task of cleaning my array on the DIY disaster that is my own home. If one were to offer such a task commercially, a PASMA approved platform and qualifications would likely be needed.
Perhaps view this then not as a how-to, but as a how-I-happened-to. Grubby panels means a drop in yield and a reduction in the free juice you can make on a bright day as well as a shortfall in returns for any feed-in tariff or exported electricity.
Warning: contains one of Nigel’s rambling mental breakdowns, this time about Izal toilet paper found in many a British state institution at around the same time as Jimmy Saville was trying to convince us all to wear a seatbelt. My apologies.
The music on this one comes from the @JamHamster channel and contains scenes of once popular nonces (not William Wollard who had some sage advice on what to do if your clothes caught fire). I hope I’m okay using these ditties – I approached JamHamster twice on Twitter but was treated to the radio silence I probably deserve. JH – if you’re reading this, I’m happy to split the peanuts this rubbish makes in YT advertising! DM me!
Links:
More about my PV project from my 2014 blog when I installed it:
dses.co.uk/index.php/free-advice/118-solar-pv-is-it-worth-it
JamHamster (Bod Remix – Bod ‘Avin’ it large!) (Clunk-Click The Hardcore Public Information Remix)
youtube.com/user/jamhamster
God, I miss those public information films. JIMMMMMYYYYYY
Spotless Water:
spotlesswater.co.uk
Affiliate links:
For a shout out on the next video, virtual cash bungs in brown envelopes can be deposited here:
buymeacoffee.com/dseselectric
My godawful Amazon storefront:
amazon.co.uk/shop/davidsaveryelectricalservices
£50 off YourTradeBase (I must do a video about YTB just to counter all the bloody Tradify ones):
go.yourtradebase.com/refer/3M6F3301
SumUp credit/debit card processing – take card payments on the go:
http://r.sumup.com/referrals/oBF5S
Money off Bulb energy (my current supplier):
join.bulb.co.uk/refer/davids2326?utm_campaign=account-referral-share&utm_medium=copy-link&utm_source=copy-button
£10 off your first Huel order when you spend £40 or more:
huel.mention-me.com/m/ol/nm0sq-david-savery
Get £40 credit for switching to Zen Internet:
zen.mention-me.com/m/ol/rt4lh-david-savery
For web hosting, get £10 off at Krystal with the code DSESELECTRIC at checkout!
krystal.uk
I wish my wife was as dirty as my solar panels! Ho ho; SNORT! But seriously folks, cleaning solar panels is no laughing matter as this forty minutes of tedium proves. Here, we use a DIY tower platform to undertake the DIY task of cleaning my array on the DIY disaster that is my own home. If one were to offer such a task commercially, a PASMA approved platform and qualifications would likely be needed.
Perhaps view this then not as a how-to, but as a how-I-happened-to. Grubby panels means a drop in yield and a reduction in the free juice you can make on a bright day as well as a shortfall in returns for any feed-in tariff or exported electricity.
Warning: contains one of Nigel’s rambling mental breakdowns, this time about Izal toilet paper found in many a British state institution at around the same time as Jimmy Saville was trying to convince us all to wear a seatbelt. My apologies.
The music on this one comes from the @JamHamster channel and contains scenes of once popular nonces (not William Wollard who had some sage advice on what to do if your clothes caught fire). I hope I’m okay using these ditties – I approached JamHamster twice on Twitter but was treated to the radio silence I probably deserve. JH – if you’re reading this, I’m happy to split the peanuts this rubbish makes in YT advertising! DM me!
Links:
More about my PV project from my 2014 blog when I installed it:
dses.co.uk/index.php/free-advice/118-solar-pv-is-it-worth-it
JamHamster (Bod Remix – Bod ‘Avin’ it large!) (Clunk-Click The Hardcore Public Information Remix)
youtube.com/user/jamhamster
God, I miss those public information films. JIMMMMMYYYYYY
Spotless Water:
spotlesswater.co.uk
Affiliate links:
For a shout out on the next video, virtual cash bungs in brown envelopes can be deposited here:
buymeacoffee.com/dseselectric
My godawful Amazon storefront:
amazon.co.uk/shop/davidsaveryelectricalservices
£50 off YourTradeBase (I must do a video about YTB just to counter all the bloody Tradify ones):
go.yourtradebase.com/refer/3M6F3301
SumUp credit/debit card processing – take card payments on the go:
http://r.sumup.com/referrals/oBF5S
Money off Bulb energy (my current supplier):
join.bulb.co.uk/refer/davids2326?utm_campaign=account-referral-share&utm_medium=copy-link&utm_source=copy-button
£10 off your first Huel order when you spend £40 or more:
huel.mention-me.com/m/ol/nm0sq-david-savery
Get £40 credit for switching to Zen Internet:
zen.mention-me.com/m/ol/rt4lh-david-savery
For web hosting, get £10 off at Krystal with the code DSESELECTRIC at checkout!
krystal.uk





![EICR failure site - righting the wrongs
This is a follow-up video to an EICR we performed back in March 2019 where the electrical installation had exceeded the capacity of the RCD on site resulting in its mechanical failure.
Original video: https://youtu.be/cJuO7oKSDMs
The demand problem has been reduced in the following ways:
One of the three electric showers has already been decommissioned.
A second electric shower is to be decommissioned and a new one is to be installed from one of the two gas boilers.
Three of the socket circuits have been reduced to 20A.
New maximum demand calculations/measurements:
Circuit 1: Shower: 7500W 32A
Circuit 2: Shower: 7500W 32A
Circuit 3: Cooker: 4600W: 10A + 30% of remainder = 13A [diversity calculation]
Circuit 4: Cooker: 4800W: 10A + 30% of remainder = 13.27A [diversity calculation]
Circuit 5: Socket ring: 32A [no diversity]
Circuit 6: Socket ring: 12.8A [40% diversity]
Circuit 7: Socket radial: 8A [40% diversity]
Circuit 8: Socket radial: 8A [40% diversity]
Circuit 9: Socket radial: 8A [40% diversity]
Circuit 10: Socket radial: 8A [40% diversity]
Circuit 11: Shed [DB2]: 16A
Circuit 12: Water heater: 13A
Circuit 13: Lighting: 1.6A [Actual]
Circuit 14: Lighting: 0.3A [Actual]
Circuit 15: Lighting: 0.25A [Actual]
Circuit 16: Lighting: 0.5A [Actual]
Circuit 17: Lighting: 0.6A [Actual]
Circuit 18: Doorbell/lighting: 0.05A [Actual]
Circuit 19: Lighting: 0.7A [Actual]
Adding this lot up gives a new maximum demand on paper of about 200A which is twice what the main fuse is rated for. But then, this is why the maximum demand calculation is a bit of a nonsense. Those socket circuits aren’t really going to be pulling 76.8A at any given time on any given day, the shed isn’t likely to be pulling 16A, the water heater is only used when the combi boiler breaks down, etc. The problem before was three electric showers plus all the socket outlets hanging off a single 63A RCD, but now that everything has been split out there is no single point at the CU which is being exposed to more current than it is rated for.
A few additional notes not covered on camera to fend off some of the questions likely to be asked in the comments….
I would have preferred to terminate the SWA directly onto the metal CU enclosure, but the knockout on the right side of the board is 32mm. Had there been a 20mm knockout, I would have done this, but I didn’t want to holesaw one in, so I went for the quicker and easier option of terminating it onto a Wiska box with a bit of T&E then going to the board. A Wiska locking nut makes for an easy way to terminate the sheath.
As shown, CP Fusebox have said on Twitter that their Type-A small form factor RCBO’s should be out around October 2019 and should have longer neutral flyleads.
Many circuits required extending, some of which were in junction enclosures, others were extended in the box trunking using Wago connectors. This work took place a while ago, it’s just taken me some time to get organised enough to edit it together and some footage was lost, so apologies that there are one or two things not shown here.
Some people are very neat with their cable forming in consumer units, but this job took all day, and this is neat enough as far as I’m concerned. I also see some people cable tie the wires to keep them together which is a no-no as it brings grouping factors into play. For more on that, I refer you to this excellent video from SparkyNinja:
https://www.youtube.com/watch?v=e3xA3t6wAmY
A couple of pedants commented on the previous video that “FAIL” was the wrong term for an EICR and I shouldn’t have described it that way. Well, the installation FAILED to meet the criteria required by the reporting process for a ‘satisfactory’ outcome. So bore off.
Links:
CP Fusebox gear was sourced from Gil-Lec Electrical:
https://www.gil-lec.co.uk/circuit-protection/consumer-units-accessories/fusebox-consumer-units
Haste UK: http://www.hasteltd.co.uk/
YouTube channels showing CU installations and discussing Type-A RCD/RCBO’s:
CJR Electrical:
https://www.youtube.com/channel/UCoVvd6bZ6LSKv-ePiow1evg
DSS Electrical:
https://www.youtube.com/channel/UCC9nYFJuVVOuH49xR_t9vJg
Artisan Electrics:
https://www.youtube.com/channel/UCUYJhbsrC1bvVWzgUq83K4A
e5 Group:
https://www.youtube.com/channel/UCAKzna71V7xKMTlNTS3eKhA
…and may I also ask you to check out J Beck Electrical ‘cos I like the way his dick swings:
https://www.youtube.com/channel/UCkezXm0I_KhjLH_DnLXFN5A/videos
Affiliate links:
Wiska earth locking nuts: https://amzn.to/2YP1HqJ
Wagobox enclosures: https://amzn.to/2YGbnU1
Wago connectors: https://amzn.to/2YBNxEZ
Brother label printer: https://amzn.to/318Lbzc EICR failure site - righting the wrongs](https://i.ytimg.com/vi/zRrK2YOPJZc/mqdefault.jpg)




