Uploaded September 2026 | Updated November 2026, 2 days ago
What are the positions of the golf swing, and how do you know if you're hitting them? Todd Graves walks through the key checkpoints he looks for in every great golf swing, in slow motion and at full speed, from address all the way to the finish.
Here's the short answer: a position is a measurement of your body — how much rotation, forward bend and side bend you have. Change the positions your body moves through and you change how your arms and the club move. The checkpoints are address (0), position one, position two at the top, a stable transition, position three (the hitting position), impact (four), extension (five) and the finish (six). Todd isn't trying to hit each one on purpose. He sets up limitations — a still head, a stable, flexed lead knee, a trail foot that stays on the ground, and side bend — so there's only one place the body can go. As he puts it: positions produce swing plane.
In this video, Todd Graves covers:
• Why you can't get more consistent without changing your body's positions
• Why a conventional address position forces compensations later
• The Single Plane address: lead arm, lead hand to the target, a non-rotational trail hand, and tilt
• The club-to-body reference — and how it carries you to position one
• Why one position sets up the next (and why sequence matters)
• Transition, the hitting position, and why impact is a checkpoint, not a position
• How limitations like head position and a stable lead knee remove variability
• Head still vs. head down — they're not the same thing
• How to practice: blending the positions (zero to two to four, zero to two to six)
Use this video as a reference: film your own swing and see if you're checking the same boxes.
⏱️ CHAPTERS
00:00 What are golf swing positions — and why do they matter?
01:58 Address: why a conventional setup forces compensations
03:03 What is the Single Plane address position?
05:04 The club-to-body reference and position one
05:41 Position two: why one position sets up the next
06:27 Transition and position three: the hitting position
07:06 Position four: is impact a position or a checkpoint?
07:37 How do limitations make your swing consistent?
08:30 Positions five and six — and head still vs. head down
10:43 How do you practice the positions? Blend them
11:33 Positions produce swing plane: the driver swing
12:50 Learn golf like a martial art: test your positions first
📘 Todd's book, The Intelligent Golf Swing: theintelligentgolfswing.com
🆓 Free P.L.A.N.E. Guide + 5 video lessons: theintelligentgolfer.com/plane
🏌️ Single Plane Academy: singleplaneacademy.com
🌐 Graves Golf: gravesgolf.com
📺 Subscribe: youtube.com/@ToddGravesGolf
#GolfSwingPositions #SinglePlaneSwing #ToddGraves #GravesGolf #GolfSwing
What are the positions of the golf swing, and how do you know if you're hitting them? Todd Graves walks through the key checkpoints he looks for in every great golf swing, in slow motion and at full speed, from address all the way to the finish.
Here's the short answer: a position is a measurement of your body — how much rotation, forward bend and side bend you have. Change the positions your body moves through and you change how your arms and the club move. The checkpoints are address (0), position one, position two at the top, a stable transition, position three (the hitting position), impact (four), extension (five) and the finish (six). Todd isn't trying to hit each one on purpose. He sets up limitations — a still head, a stable, flexed lead knee, a trail foot that stays on the ground, and side bend — so there's only one place the body can go. As he puts it: positions produce swing plane.
In this video, Todd Graves covers:
• Why you can't get more consistent without changing your body's positions
• Why a conventional address position forces compensations later
• The Single Plane address: lead arm, lead hand to the target, a non-rotational trail hand, and tilt
• The club-to-body reference — and how it carries you to position one
• Why one position sets up the next (and why sequence matters)
• Transition, the hitting position, and why impact is a checkpoint, not a position
• How limitations like head position and a stable lead knee remove variability
• Head still vs. head down — they're not the same thing
• How to practice: blending the positions (zero to two to four, zero to two to six)
Use this video as a reference: film your own swing and see if you're checking the same boxes.
⏱️ CHAPTERS
00:00 What are golf swing positions — and why do they matter?
01:58 Address: why a conventional setup forces compensations
03:03 What is the Single Plane address position?
05:04 The club-to-body reference and position one
05:41 Position two: why one position sets up the next
06:27 Transition and position three: the hitting position
07:06 Position four: is impact a position or a checkpoint?
07:37 How do limitations make your swing consistent?
08:30 Positions five and six — and head still vs. head down
10:43 How do you practice the positions? Blend them
11:33 Positions produce swing plane: the driver swing
12:50 Learn golf like a martial art: test your positions first
📘 Todd's book, The Intelligent Golf Swing: theintelligentgolfswing.com
🆓 Free P.L.A.N.E. Guide + 5 video lessons: theintelligentgolfer.com/plane
🏌️ Single Plane Academy: singleplaneacademy.com
🌐 Graves Golf: gravesgolf.com
📺 Subscribe: youtube.com/@ToddGravesGolf
#GolfSwingPositions #SinglePlaneSwing #ToddGraves #GravesGolf #GolfSwing










