Uploaded November 2025 | Updated November 2026, 13 hours ago
One of the more important maneuvers for any pilot is the go-around. The go-around, also called a rejected landing, has a fairly standard anatomy. The goal is to first stop the descent, then accelerate and climb out. Some reasons for executing a go-around might include an animal on the runway, disabled aircraft, or maybe an approach that's too high or too fast. You may even get a request from the control tower to go-around.
Â
A common way to remember the steps to a go-around are the four Câs: Cram, Climb, Clean, and Call. Once the decision is made to reject your landing, apply takeoff power (Cram). Simultaneously, level-off the nose and let the airspeed increase. Next, start the Climb. Once a positive rate of climb is established and youâre clear of any obstacles, begin slowly retracting your flaps (Clean). Now that youâre on the departure climb, you can make your radio Call to either the tower or on the CTAF, whichever applies in your situation.
Â
Thereâs also another âCâ for âCoolâ for certain airplanes. If your plane is equipped with cowl flaps or your landing checklist requires carb heat to be applied, insert this extra step. After cleaning your flaps up in a go-around, your next step is to check your carb heat and cowl flaps. This gives you 5 C's of Cram, Climb, Clean, Cool, and Call.
Â
The go-around is a critical maneuver to have in your toolkit. If your approach isnât exact in terms of configuration, airspeed, and altitude, donât try to salvage it. If you touch down with a pronounced bounce or you start to balloon in the flair, donât try to fix it. Just execute a go-around and give it another try. Go-arounds are used regularly by all pilots, regardless of experience. This is one you want to completely master. đ đŤ đ§ź đ đ
#flygoldseal #studentpilot #flighttraining #groundschool #flightinstructor #privatepilot #learntofly #pilottraining #flightschool #generalaviation #cfi #goaround
One of the more important maneuvers for any pilot is the go-around. The go-around, also called a rejected landing, has a fairly standard anatomy. The goal is to first stop the descent, then accelerate and climb out. Some reasons for executing a go-around might include an animal on the runway, disabled aircraft, or maybe an approach that's too high or too fast. You may even get a request from the control tower to go-around.
Â
A common way to remember the steps to a go-around are the four Câs: Cram, Climb, Clean, and Call. Once the decision is made to reject your landing, apply takeoff power (Cram). Simultaneously, level-off the nose and let the airspeed increase. Next, start the Climb. Once a positive rate of climb is established and youâre clear of any obstacles, begin slowly retracting your flaps (Clean). Now that youâre on the departure climb, you can make your radio Call to either the tower or on the CTAF, whichever applies in your situation.
Â
Thereâs also another âCâ for âCoolâ for certain airplanes. If your plane is equipped with cowl flaps or your landing checklist requires carb heat to be applied, insert this extra step. After cleaning your flaps up in a go-around, your next step is to check your carb heat and cowl flaps. This gives you 5 C's of Cram, Climb, Clean, Cool, and Call.
Â
The go-around is a critical maneuver to have in your toolkit. If your approach isnât exact in terms of configuration, airspeed, and altitude, donât try to salvage it. If you touch down with a pronounced bounce or you start to balloon in the flair, donât try to fix it. Just execute a go-around and give it another try. Go-arounds are used regularly by all pilots, regardless of experience. This is one you want to completely master. đ đŤ đ§ź đ đ
#flygoldseal #studentpilot #flighttraining #groundschool #flightinstructor #privatepilot #learntofly #pilottraining #flightschool #generalaviation #cfi #goaround










