JDW | GIVEAWAY! 🎁 Mac SE Reloaded KIT @JDW- | Uploaded February 2023 | Updated October 2024, 2 hours ago.
ENDED: March 19, 2023
📋 OFFICIAL RULES (PLEASE READ)
• ANYONE may enter in accordance with these rules. (BUT! Not everyone SHOULD enter because it requires a soldering iron, solder, patience, determination, and a Mac SE computer.)
• TO ENTER, make a COMMENT under this video -- any comment that complies with Youtube's guidelines is OK: bit.ly/3S5LKpc
• BOTs & SPAM are EXCLUDED from being a winner.
• MULTIPLE Comments DO NOT increase chances of winning.
• CHECK your Youtube Notifications and/or Comments because I will HEART❤️ the Winner's comment and then Reply beneath it.
• WINNER must RESPOND to my Reply within 72 hours or a different winner will be chosen. (Make it easier for me to contact you by adding an email address in the ABOUT tab on your YouTube channel page!)
• CONTEST ENDS approximately 1 month from the posted date of this video.
• SHIPPING from me to the WINNER is paid for by me, but I can ONLY SHIP to a valid address that Japan Post "EMS" can ship to — CHECK your address here: bit.ly/3S5qQXh
• Have a Freight Forwarder? I will pay to ship from Japan to your Freight Forwarder, but Winner or designated recipient must pay to have it shipped from the freight forwarder to the final destination. Box Weight: approx. 2.0kg (4.4lbs). Dimensions: 42x32.5x21.5cm (16.5x12.8x8.5")
• IMPORT TAXES /TARIFFS are NOT paid by me! If taxed, the WINNER must pay that.
• PLEASE don't resell or part-out the KIT if you win it. That defeats the purpose!
• YouTube is not affiliated with this Giveaway or in any way liable for anything associated with it.
⚠️ SCAMMER WARNING!
Beware of scams. I will not reply to any Comment under this video except the Winner's Comment, AND only after I have HEARTED❤️ the winner's Comment! See 21:37 in my video to see exactly what that means. Anyone replying under your comment(s) with the word "Telegram" is a scam!
ℹ️ GIVEAWAY DETAILS
• PRIZE: A FREE Mac SE motherboard KIT that must be soldered & assembled by the winner, without any direct assistance from me, although I have an SE Reloaded video series that walks you through the assembly here: bit.ly/3XCMDGY
• PURPOSE: To spread awareness of the fantastic DIY Macintosh SE Reloaded motherboard project and encourage vintage computer enthusiasts and electronic hobbyists to try it.
• WINNER SELECTION: Winners are chosen by an automated Comment picker that selects one Comment at random under this video only.
• SHIPPING to the winner is paid for by me (ONLY to addresses serviced by Japan Post EMS), but I will NOT pay for RETURNS, nor do I accept any liability nor do I offer any compensation if you burn yourself or otherwise cause harm during the course of your building/soldering the project together.
• WARNING! The motherboard kit you assemble cannot be used without a mostly functional Macintosh SE computer with working power supply, CRT, analog board, etc. Why? Because the kit is a motherboard PCB that allows you to move some components from a bad motherboard to the new board. The KIT includes most of the components which are brand new, but some parts must be extracted from a damaged SE motherboard.
• REQUIRED PARTS that are NOT INCLUDED in the KIT (1-6 below):
1. PRAM Battery. Holder & lock included, but not the battery itself. It's a 3.6V ½ AA battery found on Amazon (affiliate link): amzn.to/3yt3CCf
2. PLASTIC MOUNTS for the SW1, SW2 programmer's switches. Two brand new switches are included, but you will need to desolder the old switches from your bad SE motherboard so you can use the 2 plastic switch-mounts. Or can you 3D print your own using an STL file from ALXLAB: bit.ly/3p0V1kw
3. Metal Bar/Bracket (shown in my video)
4. L2, L3 Toroidal Coils -- Desolder them from your battery bombed SE motherboard. Also note that Philippe Astier (iPhil64 on TinkerDifferent) used these with success: bit.ly/3Wj3huH
Photo: bit.ly/3WeBEmx
5. Five ICs* (only 2 require desoldering):
• “GLU” chip U9D, p/n: 341-0538-A
• “ADB” chip U10C, p/n: 342-0440-B
• HI (OLD: 342-0352-A or NEW: 342-0701) & LO (OLD: 342-0353-A or NEW: 342-0702) ROM chips U6D, U7D (2pcs) — socketed, no desoldering required!
• “IWM” U8D * chip: p/n: 344-0043A or 344-0041-B (no 1.44MB floppy drive support) or “SWIM” chip p/n: 344-0062 DIP IC — socketed, no desoldering required!
* See bottom of Page-4 in my BOM for details of how to source or make replacements: bit.ly/3EhUD9v
6. Macintosh SE computer, typically with a battery-bombed or water-damaged motherboard.
⚠️ WARNING! If you can't source the required parts that are NOT INCLUDED, you can't test your motherboard build after you finish it!
📚 HELPFUL INFO:
• SE Reloaded discussion thread on Tinker Different: bit.ly/3j0v19c
📺 Please SUBSCRIBE:
youtube.com/c/JDW11/?sub_confirmation=1
MARCHintosh Event Logo concept & design by Javier Rivera
YouTube: youtube.com/c/JavMaster
Twitter: @javmast3r
#Giveaway #Macintosh #SEreloaded #JDW1
ENDED: March 19, 2023
📋 OFFICIAL RULES (PLEASE READ)
• ANYONE may enter in accordance with these rules. (BUT! Not everyone SHOULD enter because it requires a soldering iron, solder, patience, determination, and a Mac SE computer.)
• TO ENTER, make a COMMENT under this video -- any comment that complies with Youtube's guidelines is OK: bit.ly/3S5LKpc
• BOTs & SPAM are EXCLUDED from being a winner.
• MULTIPLE Comments DO NOT increase chances of winning.
• CHECK your Youtube Notifications and/or Comments because I will HEART❤️ the Winner's comment and then Reply beneath it.
• WINNER must RESPOND to my Reply within 72 hours or a different winner will be chosen. (Make it easier for me to contact you by adding an email address in the ABOUT tab on your YouTube channel page!)
• CONTEST ENDS approximately 1 month from the posted date of this video.
• SHIPPING from me to the WINNER is paid for by me, but I can ONLY SHIP to a valid address that Japan Post "EMS" can ship to — CHECK your address here: bit.ly/3S5qQXh
• Have a Freight Forwarder? I will pay to ship from Japan to your Freight Forwarder, but Winner or designated recipient must pay to have it shipped from the freight forwarder to the final destination. Box Weight: approx. 2.0kg (4.4lbs). Dimensions: 42x32.5x21.5cm (16.5x12.8x8.5")
• IMPORT TAXES /TARIFFS are NOT paid by me! If taxed, the WINNER must pay that.
• PLEASE don't resell or part-out the KIT if you win it. That defeats the purpose!
• YouTube is not affiliated with this Giveaway or in any way liable for anything associated with it.
⚠️ SCAMMER WARNING!
Beware of scams. I will not reply to any Comment under this video except the Winner's Comment, AND only after I have HEARTED❤️ the winner's Comment! See 21:37 in my video to see exactly what that means. Anyone replying under your comment(s) with the word "Telegram" is a scam!
ℹ️ GIVEAWAY DETAILS
• PRIZE: A FREE Mac SE motherboard KIT that must be soldered & assembled by the winner, without any direct assistance from me, although I have an SE Reloaded video series that walks you through the assembly here: bit.ly/3XCMDGY
• PURPOSE: To spread awareness of the fantastic DIY Macintosh SE Reloaded motherboard project and encourage vintage computer enthusiasts and electronic hobbyists to try it.
• WINNER SELECTION: Winners are chosen by an automated Comment picker that selects one Comment at random under this video only.
• SHIPPING to the winner is paid for by me (ONLY to addresses serviced by Japan Post EMS), but I will NOT pay for RETURNS, nor do I accept any liability nor do I offer any compensation if you burn yourself or otherwise cause harm during the course of your building/soldering the project together.
• WARNING! The motherboard kit you assemble cannot be used without a mostly functional Macintosh SE computer with working power supply, CRT, analog board, etc. Why? Because the kit is a motherboard PCB that allows you to move some components from a bad motherboard to the new board. The KIT includes most of the components which are brand new, but some parts must be extracted from a damaged SE motherboard.
• REQUIRED PARTS that are NOT INCLUDED in the KIT (1-6 below):
1. PRAM Battery. Holder & lock included, but not the battery itself. It's a 3.6V ½ AA battery found on Amazon (affiliate link): amzn.to/3yt3CCf
2. PLASTIC MOUNTS for the SW1, SW2 programmer's switches. Two brand new switches are included, but you will need to desolder the old switches from your bad SE motherboard so you can use the 2 plastic switch-mounts. Or can you 3D print your own using an STL file from ALXLAB: bit.ly/3p0V1kw
3. Metal Bar/Bracket (shown in my video)
4. L2, L3 Toroidal Coils -- Desolder them from your battery bombed SE motherboard. Also note that Philippe Astier (iPhil64 on TinkerDifferent) used these with success: bit.ly/3Wj3huH
Photo: bit.ly/3WeBEmx
5. Five ICs* (only 2 require desoldering):
• “GLU” chip U9D, p/n: 341-0538-A
• “ADB” chip U10C, p/n: 342-0440-B
• HI (OLD: 342-0352-A or NEW: 342-0701) & LO (OLD: 342-0353-A or NEW: 342-0702) ROM chips U6D, U7D (2pcs) — socketed, no desoldering required!
• “IWM” U8D * chip: p/n: 344-0043A or 344-0041-B (no 1.44MB floppy drive support) or “SWIM” chip p/n: 344-0062 DIP IC — socketed, no desoldering required!
* See bottom of Page-4 in my BOM for details of how to source or make replacements: bit.ly/3EhUD9v
6. Macintosh SE computer, typically with a battery-bombed or water-damaged motherboard.
⚠️ WARNING! If you can't source the required parts that are NOT INCLUDED, you can't test your motherboard build after you finish it!
📚 HELPFUL INFO:
• SE Reloaded discussion thread on Tinker Different: bit.ly/3j0v19c
📺 Please SUBSCRIBE:
youtube.com/c/JDW11/?sub_confirmation=1
MARCHintosh Event Logo concept & design by Javier Rivera
YouTube: youtube.com/c/JavMaster
Twitter: @javmast3r
#Giveaway #Macintosh #SEreloaded #JDW1
![Apple IIe Card in Color Classic MYSTIC [Part 1]](https://i.ytimg.com/vi/iKF_zGshSWY/hqdefault.jpg "Apple IIe Card in Color Classic MYSTIC [Part 1]
Watch me recap, install and test an Apple IIe Card & Y-cable in an overclocked Macintosh Color Classic Mystic. (My Part II video is here: https://youtu.be/ebftAlXGgbk )
🔎 INDEX
0:00 — Intro
2:30 — Recapping
14:40 — Chip Overview
15:49 — Card Installation
20:21 — Software Install & Overview
36:33 — Problems
44:50 — Closing Words
🛒 BUY
• Nylon Spacer Kit: https://amzn.to/3DWaKZb
[ FOR RECAPPING ]
• MOUSER cart (2 OS-CON caps): https://bit.ly/3fhtBFm
-or-
• Console5 (2 tantalum caps): https://bit.ly/3xKH5Qj
(OS-CON are lower ESR but doesnt matter when recapping the card.)
[ SD CARD DRIVES ]
• FloppyEMU: https://bit.ly/2BA8yru
• BlueSCSI: https://scsi.blue
• MacSD: https://bit.ly/3dIivZN
• Stephen Arsenaults Over Easy II (Rev.B): https://bit.ly/3Rsc7DS
[ Y-Cable Replacements for the IIe Card ]
• PCB Adapter w/Standard Floppy Drive Connector: https://bit.ly/3XC0UUj
• PCB Adapter w/Ribbon Cable type Floppy Drive Connector: https://ebay.to/3UuDos1
• Copy of stock Y-cable, but no ferrite choke at floppy connector: https://bit.ly/3fe1hDV
🛒 BUY TOOLS
• 10x Loupe: https://amzn.to/3tW1lf0
• Hakko Soldering Station (Fisher Price colors): https://amzn.to/3ArxBJ6
💁♂️TIP: Use 350°C & Leaded solder.
• Solder (Leaded Rosin Core 0.8mm): https://amzn.to/3GzJbVl
• 2-spool Solder Holder: https://amzn.to/39hIMbt
• AMTECH 559 V2 Flux (flawed plunger): https://amzn.to/3Muf4C2
• MG Chemicals Flux (great plunger): https://amzn.to/3kuAcsZ
• Desoldering wick: https://amzn.to/3iMAnA5
• DE-5000 Handheld LCR Meter: https://amzn.to/2ScttJz
The best handheld meter to check capacitor ESR! Includes all 3 accessories: TL-21, TL-22 & TL-23.
(If Amazon is out of stock, please check EBAY.)
• UV Solder Mask (Green): https://amzn.to/3hogoaE
• 10W UV Flashlight (for curing): https://amzn.to/3DLbizS
• Fume Extractor: https://amzn.to/3MApWyb
• 99% ISO Alcohol (Spray Bottle!): https://amzn.to/3ae4fG6
• 99% ISO Alcohol: https://amzn.to/3NoFkxN
• 99% ISO Alcohol: https://amzn.to/2MkjS3h
💁♂️I gave you 3 alcohol choices above because its often out of stock. 70% will work, 91% is better, but 99% is best for electronics cleaning (fast drying & no residue).
🛒 BUY MY POLO SHIRT
• 8 Bit Tees (Mine is size L. Im 59. Fits me well.): https://bit.ly/3UDEt0s
💵 NOTE: Your price on Amazon (US only) is the same even if you dont click the amzn.to Affiliate links above, but if you do click & purchase within 24 hours, Amazon may pay me a small commission on qualifying items in your Cart.
📚 IIe Card REFERENCE
• Manual: https://bit.ly/3Sd6OsU
• Brochure: https://bit.ly/3r5dr4K
NOTE: The above 2 PDFs are versions I painstakingly fixed and then uploaded to Macintosh Garden.
• Compatible Macs & System Software: https://bit.ly/3C46kjo
• Troubleshooting: https://bit.ly/3DQ8Evr
• Installing: https://bit.ly/3dJ0Pgr
• FAQ: https://bit.ly/3US3TaD
• OVERVIEW: https://bit.ly/3R3RRYU
• How Apple got Macs into US schools: https://bit.ly/3C3tM07
(Mentions the IIe Card supports Apple DOS 3.3, ProDOS & Pascal.)
• Gemini vs. Mega II: https://bit.ly/3LCFJNu
• Differences with a real IIe: https://bit.ly/3C76Mxm
🍎 3D Apple II by shrednector: https://bit.ly/3TqwzXo
📼 Two interesting videos about the Apple IIe Card:
@The 8-Bit Guy https://youtu.be/tvZ43JqrvXA?t=724
@Rons Computer Videos https://youtu.be/F_Fyoqu8IQA?t=250
💾 SOFTWARE
• IIe Card software v1.0 ~ 2.2.2d1: https://bit.ly/3fk1DZy
(Note the Blank Disk Images on that Macintosh Garden page too.)
• For FloppyEMU: https://bit.ly/3Sx7hG2
NOTE: You can only use one SmartPort volume on FloppyEMU named smart0, and the extension must be .po or .hdv or .2mg .
• Total Replay: https://bit.ly/3r721gV
Use as a MacSD Composite or rename smart0 for FloppyEMU SmartPort drive.
• BlueSCSI-compatible images of Total Relay & ProDOS: https://bit.ly/3DQqBtN
• Disk Images by SavageTaylor: https://bit.ly/3UDK07e
• Disk Jockey (MacOS disk image creator): https://bit.ly/3LFfeqA
• Dazzle Draw *.po file: https://bit.ly/3UBCgCP
• Canvas 3.5 (Mac): https://bit.ly/3CdZjLP
🤖 Apple II EMULATOR
• Virtual ][ (not free but the best; however, no IIgs emulation): http://virtualii.com
🙏 SINCERE THANKS to Paypal supporters (Oct. 2022):
• Gavin Maxwell
• Philippe ASTIER
• Mauro Acciaccaferri
🕹️ THANKS AGAIN to Javier Rivera who sold me a fully tested Mach III joystick. Check out his Channel here: https://www.youtube.com/c/JavMaster/videos
💰HOW TO SUPPORT THIS CHANNEL
https://www.paypal.me/supportJDW
📺 Please SUBSCRIBE:
http://www.youtube.com/c/JDW11/?sub_confirmation=1
🎬 MY VIDEOS
https://www.youtube.com/user/JDW26/videos
🎶 Music Credits
• These 5 are CC BY-ND 3.0 by Anders Enger Jensen: https://bit.ly/3JPllrk
1. Smooth Bed 2
2. Drum & Base Bed 1
3. Smooth Bed Guitar 1
4. Smooth Bed Guitar 2
5. Suspense Bed 1
• Ending music is CC0 from: https://bit.ly/2LAKews
#AppleIIe #ColorClassic #Mystic #JDW1")
![Gear FIX & Molykote LUBE of Apple 1.44MB Floppy Drive [MP-F75W-02G]](https://i.ytimg.com/vi/ia513LCN7jY/hqdefault.jpg "Gear FIX & Molykote LUBE of Apple 1.44MB Floppy Drive [MP-F75W-02G]
How to replace a BROKEN GEAR to repair a Macintosh SuperDrive SONY MFD-75W-01G 1.44MB floppy drive and lubricate using Molykote EM-30L grease (and a dab of SuperLube PTFE oil). Same gear is used in Apple 800K floppy drives too.
🔎 INDEX
0:00 Intro
1:56 EBAY Gears Compared
5:35 Italian Gears
9:34 1.44MB Drive Mechanism
10:25 Molykote vs. SuperLube
12:24 Gearbox Lube & Gear Replacement
16:47 Drive Lube
22:56 Testing
25:05 Closing Thoughts
Also be sure to watch my 800K Lube & Recapping video to see lots of detail I do not show in the above video: https://youtu.be/sy6JWEerHQc
🛠️ TOOLS & THINGS TO BUY:
• 🇮🇹 Italian-made molded Gear on EBAY: https://ebay.to/2FhBCs5
Updated in May 2024. I can confirm the quality is now on par with Tune-O-Gear, which I reviewed here: https://youtu.be/eC1nUblJpwQ
• EM-30L Grease (AMAZON): https://amzn.to/2DZRdvX
• Super Lube PTFE Oil 51010: https://amzn.to/2ANvXI7
⚠️ Only mix SuperLube oil with SuperLube grease, not with EM-30L.
• Super Lube 21030 Synthetic PTFE Grease (NOT Silicone!): https://amzn.to/3j2xV88
• 99% ISO Alcohol: https://amzn.to/3WbB5f0
• 4.3 LCD Microscope: https://amzn.to/46GyNHX
• Anti-static pad with Wrist Strap (16.9x21.6 / 43x551cm): https://amzn.to/3LBfMi1
• Wall socket Ground adapter for banana-jack Wrist Strap: https://amzn.to/2Yvq5ge
• Torx T15 with LONG neck (to open Mac): https://amzn.to/2ScAskx
• Bulldog Clip (helpful to pry off back case): https://amzn.to/2H7lIhF
• Cotton Swab for head cleaning
• Soldering iron with °F-only LCD & Solder Kit (80W, cheap!): https://amzn.to/4bQSob2
or
• Soldering Station (120W, ESD safe): https://amzn.to/30g1Frt
or
• HAKKO (Japanese) Soldering Station (70W ceramic core): https://amzn.to/4ddA90B
• Solder (Leaded Rosin Core 1.6mm): https://amzn.to/2vEdxal
• Desoldering wick: https://amzn.to/3Yc8KYH
💁♂️TIP: Set soldering iron temperature to 350°C. Dont use lead-free solder.
💵 NOTE: Your price on Amazon (US only) is the same even if you dont click the amzn.to Affiliate links above, but if you do kindly click and purchase within 24 hours, Amazon may pay me a small commission on all qualifying items in your Cart (even items not linked above).
🛒 MOUSER Cart to replace electrolytic Capacitors: https://bit.ly/3fZzuBR
⚠️ Before you buy this cart, check your 1.44MB drives capacitance values so you can confirm your drive is the same as my 1.44MB drive. NOTE! Not all the capacitors are the same as 800K drive capacitors, so beware if also buying for an 800K drive. You should also consider recapping other boards too so you can add those capacitors to get your balance high enough to qualify for free shipping. I make no commission at all on Mouser Carts. I just provide it to be helpful. See my 800K drive video for details on how to go about recapping, since the location of capacitors is the same on the 800K and 1.44MB drives.
👉 MacEffects CLEAR CASE for SE & SE/30: https://bit.ly/3j19wjp
☠️ ROM-inator II (for SE/30 or Mac II): https://bit.ly/3j7xAkO
💾 olePigeon Patch ROM (Turbo040 compatible): https://bit.ly/2EjCBrr
(I programmed the olePigeon ROM file to my ROM-inator II.)
📚 REFERENCE:
• Molycote EM-30L Grease Specs: https://bit.ly/2UpxNph
• NEVER format 1.44MB High Density floppies as 800K or 400K. 1.44MB High Density floppies are designed to be written with a stronger magnetic field. A 400K or 800K drive will write a weaker signal to a 1.44MB disk, and that will likely develop bit-errors over time. Only use Double-Sided Double-Density DSDD 800K disks in 800K or 400K drives, or use 400K disks in 400K drives. You can use 400K & 800K floppies in Apple 1.44MB SuperDrives because 1.44MB drives use a weaker magnetic field when writing to the lower density disks. Just dont use 1.44MB disks in 800K and 400K drives, even if they seem to work.
🗣 Helpful Groups:
• TinkerDifferent Forum: http://tinkerdifferent.com
• Vintage Apple Macintosh Enthusiasts: https://bit.ly/2YgpDRb
• Vintage Macintosh Restoration & Preservation: https://bit.ly/2XKFzfK
💰SUPPORT THIS CHANNEL
https://www.paypal.me/supportJDW
🙏 HUMBLE THANKS to Paypal contributor Riki Moir (August 2020)!
🙏 SPECIAL THANKS to Joe (jjclay at 68kMLA), for donating a tub of Molykote EM-30L.
📺 SUBSCRIBE:
http://www.youtube.com/c/JDW11/?sub_confirmation=1
🎬 MY VIDEOS
https://www.youtube.com/user/JDW26/videos
#Apple #floppydrive #Macintosh #JDW")
![Macintosh SE Reloaded TESTING [Part 4]](https://i.ytimg.com/vi/jxFu6Ye8_To/hqdefault.jpg "Macintosh SE Reloaded TESTING [Part 4]
Watch me TEST the SE Reloaded motherboard in this Part 4 finale!
No Reloaded board? No problem! I mention things you may not know about the Mac SE, show you how to make serial loopback connectors, and even demonstrate a 16MHz PDS accelerator.
SE Reloaded Parts I, II & III are here: https://bit.ly/3xHSp02
🔎 INDEX
0:00 — Intro
4:00 — Power-on
4:25 — ADB Mouse
4:39 — FloppyEMU
8:29 — ADB Kybd, Int. SW & Easter Eggs
9:55 — Reset SW
10:07 — Ext. Floppy Drive
11:34 — Sound Volume
13:56 — Headphone Jack
17:49 — SCSI/BlueSCSI
21:12 — PRAM Batt.
29:43 — MacSD & OverEasy II
35:49 — Serial Ports & Loopback Conn.
45:30 — TechStep
50:43 — PDS 16MHz SpeedCard
1:03:16 — Closing Thoughts
🗣️ SE Reloaded discussion on TinkerDifferent: https://bit.ly/3yLLjJ0
🧔💰Send love to the creator, Kai Robinson, by Paypal: ktr27582@gmail.com
🛒 BUY
• MOUSER CART in My BOM under 📚 REFERENCE below.
• SE Reloaded board from MacEffects (red): https://bit.ly/39yehBv
• FloppyEMU: https://bit.ly/2BA8yru
• Mono to Stereo 3.5mm Adapter: https://amzn.to/3RAiCFM
• PRAM Battery (1/2 AA 3.6V): https://amzn.to/3cmNMk3
• OverEasy II (by Stephen Arsenault, assembled in Japan by Kay Koba): https://bit.ly/3yXVnx4
(The version I have is Rev.B.)
• SCSI Cable (THE BEST 50-pin cable for internal drives!): https://bit.ly/3aTcmIS
• BlueSCSI External (Made in Japan): https://bit.ly/3On5xg6
• BlueSCSI Internal (Made in Japan): https://bit.ly/3B7N4kR
• MacSD (Overclockable, CD Changer features & more!): https://macsd.com
• Serial Cable (to make loop-back plugs for Snooper2): https://amzn.to/3znGeXn
• Heat Shrink Tubing Kit: https://amzn.to/34Cwzzj
• Replacement Feet for SE case bottom (hand-made in Japan!): https://bit.ly/3B0fQ73
• Clear Programmers Switch (MacEffects): https://bit.ly/3cGkAEQ
📷 MY CAMERA GEAR (used in making most of my videos):
• Panasonic GH5: https://amzn.to/39TAGtK
• GH5 II (newer version of my camera): https://amzn.to/3brSTyJ
• Olympus 60mm F2.8 Macro (used for all closeups): https://amzn.to/3u805Xb
• Olympus 12-100mm F4 (great all-around zoom lens!): https://amzn.to/39WJAGN
• Olympus 40-150mm F2.8 (fast glass with a long reach!): https://amzn.to/3Af3GqB
• Sony Tough 256GB SD Card (amazingly good!): https://amzn.to/3OyKwjO
• LAV Mic (BOYA by-M1 Pro): https://amzn.to/3bzfb1G
• Tripod (carbon fiber!): https://amzn.to/3QVuz8Q
(Tripod video review is here: https://youtu.be/6xS3R1kUlBI )
💵 NOTE: Your price on Amazon (US only) is the same even if you dont click the amzn.to Affiliate links above, but if you do click & purchase within 24 hours, Amazon may pay me a small commission on qualifying items in your Cart.
📚 REFERENCE
• My BOM (with Mouser Cart): https://bit.ly/3MF7BA9
• Kais BOM: https://bit.ly/3G2H6lA
• Serial Loop-back thread (for Snooper2) on TinkerDifferent: https://bit.ly/3PCFbrJ
• TechStep ROM Cartridge reverse-engineering: https://bit.ly/3Pzj9WS
• TechStep Recreation: https://bit.ly/3B209fs
• max1zzzs ROM replacement Github: https://bit.ly/3Ou4hc7
• Kais ADB chip replacement Github: https://bit.ly/3HZjvTU
• Kais Main Github page: https://bit.ly/3wD3DkM
• Kais Videos on SE Reloaded: https://bit.ly/3yQqOea
• Kais Guide to Apple Custom ASICs: https://bit.ly/3yqdoVJ
• Mac SE Service Source Manual: https://bit.ly/3MykhsC
• Guide to Macintosh Family Hardware: https://bit.ly/3lv4xLc
• Computer Chronicles video on the SE: https://youtu.be/JjHzPuGi5Js
• Motherboard Horror Pics 😱: https://bit.ly/3LxK2Yw
• SpeedCard audio problem: https://bit.ly/3vb2VLO
💾 SOFTWARE
• System 7.1 Install on 800K disks (not for SE FDHD!): https://bit.ly/3O97ehi
• PRAM 5 (to properly set the date): https://bit.ly/3aSlTzH
• Snooper 2.0: https://bit.ly/3cmz0tg
• SpeedCard control panel: https://bit.ly/3z0Xn7O
🙏 MY SINCERE THANKS to these recent Paypal contributors (July 2022):
• Mauro Acciaccaferri (monthly supporter)
• Philippe Astier (new monthly supporter)
💰HOW TO SUPPORT THIS CHANNEL
https://www.paypal.me/supportJDW
(If you do very kindly donate, it would be a wonderful help if you could let me know if I have permission to use your full name, or use something like John in Texas, when I give you public thanks in a future video. Pronunciation help is also appreciated!)
📺 Please SUBSCRIBE:
http://www.youtube.com/c/JDW11/?sub_confirmation=1
🎬 MY VIDEOS
https://www.youtube.com/user/JDW26/videos
🎶 Music Credits
• Against the Wall, CC BY 3.0 by BoXCat Games: https://boxcat.bandcamp.com
• The Hex, CC0 by Steven Ruud (pixelsphere): https://bit.ly/3vdMTk9
• Sweet Elegance, CC BY-SA 3.0 by Arthur Vyncke: https://bit.ly/3J4g0Mw
• The Missing Connection, CC BY-SA 3.0 by Arthur Vyncke: https://bit.ly/3aZlLid
#Macintosh #SEreloaded #Motherboard #JDW")
![ZEN Movie, by Michael Green [1986]](https://i.ytimg.com/vi/lGRMW6ka9Rc/hqdefault.jpg "ZEN Movie, by Michael Green [1986]
Composed entirely of MacPaint images from his ground-breaking book, Zen & the Art of the Macintosh, Michael Green used MacMovies from Beck-Tech to assemble this stunning movie animation. When first publicly shown at the January 1986 Macworld Expo, Beck-Tech engineer Henry Spragens was so impressed he paid over $1000 for a 20MB hard drive just to be able to store and playback the movie on his own Mac. This and more can be found at Henrys website here: https://www.audioimprov.com/AudioImprov/Macintosh/Macintosh.html
💾 DOWNLOAD the original movie files here: https://macintoshgarden.org/apps/zen-movie
📖 Zen & the Art of the Macintosh is freely viewable here: https://bit.ly/36r8tVA
💵 BUY the original book on Amazon: https://amzn.to/3eFqpjH
(Affiliate link)
🙇♂️ Dear Subscribers and Friends,
I sincerely apologize for the delay in releasing my next product video overview. This ZEN Movie video is a smaller work that is my way of offering at least some content to you in July 2021. Ive had some time consuming projects that slowed my filming pace, but more content is indeed coming! Your kind understanding and patience is sincerely appreciated.
I will offer more detailed appreciation at the end of my next video; but for now, I wish to HUMBLY THANK two amazing individuals for their extremely kind and generous PayPal contributions to this channel:
🙏 Mauro Acciaccaferri — a monthly PayPal supporter since March 2021!
🙏 Kai Robinson — who made an extremely generous contribution in June 2021!
Kai is an extraordinary content creator who reverse engineered the entire Mac SE motherboard! Check out this great content related to Kai and his amazing project:
• Github: https://github.com/kr239
• Video Interview: https://youtu.be/XGbGo3tugF0
• Hackaday: https://bit.ly/2UyFoFi
💁♂️SUPPORT THIS CHANNEL💰
https://www.paypal.me/supportJDW
📺 SUBSCRIBE:
http://www.youtube.com/c/JDW11/?sub_confirmation=1
#zen #art #macintosh #JDW")
![AMD 6970M Repasting & PROBLEM in 2009 iMac 27 [Video Card]](https://i.ytimg.com/vi/n2a8oEI2y6U/hqdefault.jpg "AMD 6970M Repasting & PROBLEM in 2009 iMac 27 [Video Card]
I explain a Radeon 6970M video card compatibility problem used in a late 2009 27 iMac. Repasting helps but doesnt completely solve the sudden power-down problem. (Sorry about the background noise, but thats Japan for you!)
🏥 PROBLEM: The 6970M causes the iMac to suddenly power-off when the video card gets too hot, unlike the stock 4850 video card which would never kill power to the Mac. Before repasting, the iMac would shut-off at around 52°C or 61°C, depending on the software running. After repasting (with Thermal Grizzly Kryonaut on the GPU and K5 Pro on the memory chips), the GPU Heatsink temperature at which the shutdown would occur became 77°C. This is still a problem though because the iMac shouldnt suddenly shutoff at all. I therefore cannot recommend the 6970M in 2009 or 2010 iMacs. I will retain mine though for further testing and to at least be able to use my iMac.
🎥 My previous video on the 6970M: https://youtu.be/9dPsH1zIQMs
👕 Apple T-Shirt worn in this video is a shirt Ive had since my college days, acquired sometime around 1990. Heres a photo showing the back side too: https://cl.ly/95c617
💳 EBAY listing of the 6970M I purchased:
https://www.ebay.com/itm/163991633495
🍎 Apple Forum Discussion about replacement video cards that work in the late 2009 27 iMac: https://discussions.apple.com/thread/3029120
♨️ If your 2008~2011 iMacs video card is dead and youve never baked it before, I suggest you perform the bake before spending the money on a replacement video card. My BAKE VIDEOS are here: https://bit.ly/2UEOf4o
🔥 THERMAL PASTES I strongly recommend:
K4 & K5 Pro Kit: https://amzn.to/38WkEZO
-or-
K5 Pro (for chips other than GPU): https://amzn.to/33OIDJ6
& Thermal Grizzly Kryonaut (for GPU only): https://amzn.to/36NMQwu
😎 Fan Control & Temperature Viewer Apps to keep your iMac running cooler I can vouch for all of these:
• Macs Fan Control: https://crystalidea.com/macs-fan-control
• smcFanControl: https://www.eidac.de
• iStat Menus: https://bjango.com/mac/istatmenus/
🛠 TOOLS to open/close iMac:
• 2 strong suction cups for front glass removal: https://amzn.to/2tkcmvJ
• Torx T10 for LCD removal (T9 works but T10 is best) & T9 for video card removal. The following kit contains more than needed for the iMac, but its highly rated, has grippy handles and magnetic tips, and no 1 month+ wait from China: https://amzn.to/2UCaurK
-or-
Alternative kit, WRENCH style (cheaper): https://amzn.to/2wIgWWe
-or-
Alternative kit, BIT style (youll need a handle): https://amzn.to/2vRkUeC
🔦 OTHER ITEMS needed or recommended:
• Anti-static wrist strap (connect wire to earth ground): https://amzn.to/2uSTy74
• Dust blower - Giottos Rocket Blaster Large: https://amzn.to/2OgHHXt
• Microfiber cloth (for cleaning the screen/glass)
• Flashlight (to peer into the dark spaces inside the iMac)
► I used a Samsung EVO 850 1TB SSD to replace the stock Apple hard drive, but the 860 EVO or Crucial MX500 are equivalent. To use an SSD in late 2009 27 iMac, youll also need a special mounting bracket and a separate temperature sensor:
• Bracket: https://amzn.to/37Zn4qg
• Sensor for 2009-2010 iMacs: https://amzn.to/3b3knWU
• EVO 860 (1TB): https://amzn.to/2RKem9M
-or-
• Crucial MX500 (2TB): https://amzn.to/3bxHybf
💵 NOTE: Your price on Amazon (US only) is the same even if you dont click the amzn.to Affiliate links above, but if you do kindly click and purchase within 24 hours, Amazon may pay me a small commission on all qualifying items in your Cart (even items not linked above).
💰SUPPORT THIS CHANNEL
If you wish to buy me a drink or otherwise support my content creation: https://www.paypal.me/supportJDW
🙏 My sincere thanks to the following Paypal subscribers since the end of March 2020 to present:
• Cesar Cedraro
• Owen Roberts
• James Hart
• Jim Mihori
Jim Mihori is a ukulele instructor, musician, and treasurer of a nonprofit Hawaiian cultural school in Arlington, VA called Halau O Aulani. Their mission over the last 24 years has been to perpetuate Hawaiian culture by teaching and performing hula, music, and chants. To participate, donate and learn more, please visit their website here:
https://halauoaulani.org/
📺 Please SUBSCRIBE:
http://www.youtube.com/c/JDW11/?sub_confirmation=1
#Apple #Macintosh #iMac #VideoCard #JDW")
