Uploaded April 2026 | Updated November 2026, 17 hours ago
Gates and triggers are some of the most common signals you’ll patch. Both are binary signals, meaning they’re either off or on. Off is 0 volts, and on is usually somewhere around 5 to 10 volts.
So, what’s the difference?
A gate stays high for a certain amount of time. The length of the gate is part of the signal. Sequencers commonly output gates, letting you control how long each note lasts.
A trigger is basically a very short gate. It’s just a quick pulse, usually only a few milliseconds long. Triggers are often used to start events, like setting the tempo for drum modules, firing envelopes, or advancing sequencers. Clock signals are usually triggers as well. Each pulse moves something forward in time, like advancing a sequencer or firing rhythmic events.
In many cases, you can use a gate as a trigger, since modules often only care about the moment the signal goes from low to high. But using a trigger where a gate is expected doesn’t always work the same way, since triggers are so short.
Gates and triggers might be simple signals, but they’re essential for controlling rhythm, timing, and events across your entire patch.
As part of our Getting Started series, here's our blog that covers gates and triggers even more:
noiseengineering.us/blogs/loquelic-literitas-the-blog/getting-started-gates-vs-triggers
More information on the Case of Steel:
noiseengineering.us/products/case-of-steel
Join us on Discord! Invite link: discord.gg/A5zzmUjxAk
Subscribe to this channel with one click:
youtube.com/noiseengineering?sub_confirmation=1
.-- .... .- - - .... . ..-. ..- -.-. -.- .. ... .. - . .-. .. - .- ...
Exploring and sharing engaging ideas in sound, music, and synthesis
• Eurorack, 5U
• Guitar Pedals
• VST, AU, AAX plugins
• Reason Rack Extensions
Instagram:
Eurorack: instagram.com/noiseeng
Pedals: instagram.com/noiseengpedals
Plugins: instagram.com/noiseengplugins
Facebook: facebook.com/noiseeng
noiseengineering.us
Noise Engineering | Get Out Of The Box
Gates and triggers are some of the most common signals you’ll patch. Both are binary signals, meaning they’re either off or on. Off is 0 volts, and on is usually somewhere around 5 to 10 volts.
So, what’s the difference?
A gate stays high for a certain amount of time. The length of the gate is part of the signal. Sequencers commonly output gates, letting you control how long each note lasts.
A trigger is basically a very short gate. It’s just a quick pulse, usually only a few milliseconds long. Triggers are often used to start events, like setting the tempo for drum modules, firing envelopes, or advancing sequencers. Clock signals are usually triggers as well. Each pulse moves something forward in time, like advancing a sequencer or firing rhythmic events.
In many cases, you can use a gate as a trigger, since modules often only care about the moment the signal goes from low to high. But using a trigger where a gate is expected doesn’t always work the same way, since triggers are so short.
Gates and triggers might be simple signals, but they’re essential for controlling rhythm, timing, and events across your entire patch.
As part of our Getting Started series, here's our blog that covers gates and triggers even more:
noiseengineering.us/blogs/loquelic-literitas-the-blog/getting-started-gates-vs-triggers
More information on the Case of Steel:
noiseengineering.us/products/case-of-steel
Join us on Discord! Invite link: discord.gg/A5zzmUjxAk
Subscribe to this channel with one click:
youtube.com/noiseengineering?sub_confirmation=1
.-- .... .- - - .... . ..-. ..- -.-. -.- .. ... .. - . .-. .. - .- ...
Exploring and sharing engaging ideas in sound, music, and synthesis
• Eurorack, 5U
• Guitar Pedals
• VST, AU, AAX plugins
• Reason Rack Extensions
Instagram:
Eurorack: instagram.com/noiseeng
Pedals: instagram.com/noiseengpedals
Plugins: instagram.com/noiseengplugins
Facebook: facebook.com/noiseeng
noiseengineering.us
Noise Engineering | Get Out Of The Box




![[Redacted] Versio firmware in this ambient patch | Noise Engineering #eurorack
#eurorack #modularsynth #noiseengineering
Join us on Discord! Invite link: https://discord.gg/A5zzmUjxAk
Subscribe to this channel with one click:
https://www.youtube.com/noiseengineering?sub_confirmation=1
. .... .- - - .... . ..-. ..- -.-. -.- .. ... .. - . .-. .. - .- ...
Exploring and sharing engaging ideas in sound, music, and synthesis
• Eurorack, 5U
• Guitar Pedals
• VST, AU, AAX plugins
• Reason Rack Extensions
Instagram:
Eurorack: https://www.instagram.com/noiseeng/
Pedals: https://www.instagram.com/noiseengpedals/
Plugins: https://www.instagram.com/noiseengplugins/
Facebook: https://www.facebook.com/noiseeng
http://www.noiseengineering.us
Noise Engineering | Get Out Of The Box [Redacted] Versio firmware in this ambient patch | Noise Engineering #eurorack](https://i.ytimg.com/vi/BY5NOKxYjEQ/mqdefault.jpg)





