Uploaded April 2026 | Updated September 2026, 1 week ago
Man this 2001 KTM 380 EXC was a project, but I’m amped to spin some laps around Club 57 dialing her in! Full YouTube video about the build and riding the bike is up on my channel! Shout out to everyone who helped make this possible 🤝 All Balls came through with every seal, bearing, brake rebuild, clutch master rebuild, o-ring, petcock, and piece to make it ride new again 😈 Thank you Eric Hetland for originally getting us this bike! MotoSport with the OEM parts and goodies needed. Langston Performance came through doing the whole engine and working magic finding hard to get parts. Hygge Performance did a custom cone pipe to go along with Langston Performance engine specs, absolutely stoked! Solid Performance came through majorly with the forks/clamps/bar mounts and shock, making this a new style front end and fitting a SXS shock from back in the day with some new additions. Lots of measurements and experience from them to get the right setup. Dubya USA did these the wheels with the orange rims. Sam Nicolini put in many hours helping me track down the rare parts, her I and Robby Green built this bike in the living room 😂 Had to do the Lectron Fuel Systems 38 PRO Billetron of course. Backyard Design did these graphics, Guts Racing seat cover. Bolt Motorcycle Hardware with the fresh bolts. Renthal 996 bars, chain and sprockets. My dad made custom pieces to make everything fit. Maxima oil and fluids.
Man this 2001 KTM 380 EXC was a project, but I’m amped to spin some laps around Club 57 dialing her in! Full YouTube video about the build and riding the bike is up on my channel! Shout out to everyone who helped make this possible 🤝 All Balls came through with every seal, bearing, brake rebuild, clutch master rebuild, o-ring, petcock, and piece to make it ride new again 😈 Thank you Eric Hetland for originally getting us this bike! MotoSport with the OEM parts and goodies needed. Langston Performance came through doing the whole engine and working magic finding hard to get parts. Hygge Performance did a custom cone pipe to go along with Langston Performance engine specs, absolutely stoked! Solid Performance came through majorly with the forks/clamps/bar mounts and shock, making this a new style front end and fitting a SXS shock from back in the day with some new additions. Lots of measurements and experience from them to get the right setup. Dubya USA did these the wheels with the orange rims. Sam Nicolini put in many hours helping me track down the rare parts, her I and Robby Green built this bike in the living room 😂 Had to do the Lectron Fuel Systems 38 PRO Billetron of course. Backyard Design did these graphics, Guts Racing seat cover. Bolt Motorcycle Hardware with the fresh bolts. Renthal 996 bars, chain and sprockets. My dad made custom pieces to make everything fit. Maxima oil and fluids.
