Uploaded January 2013 | Updated September 2026, 1 week ago

---

Hi all

Here my replication of Jean Louis Naudin 's electrolysis with the GEGENE.induction plate.

The electrolyte is backing soda (bicarbonate de soude) , i did not measure any quantity.

I used the same schematic as JLN, and i used a ultrafast diode for rectification ( 600 volt and 35 A and 35 ns )

The diode is slightly warm

But the water is almost boilling after some minutes ,

The cathode and anode of the cell is made with stainless steel cable.

The gaz production is really impressive for so a crude systeme.

I wonder if it would also work with an ANTON cell

hope this helps

Good luck at all

Laurent