Uploaded May 2024 | Updated September 2026, 1 week ago
On the Tuesday, April 30th livestream, we spent some time in Fusion360 designing a insert to hold a USB extension cable in the typical skirt used on a Voron Trident or 2.4. This USB cable is intended to plug into the Raspberry Pi or alternative SBC and provide an accessible USB port in the front skirt.
In this video I go through the process to revise the model.
Be sure to watch the replay of the stream, here is a time stamped link to where we started modeling.
youtube.com/live/MKXrtHEKLhk?si=UPsRdmnYcFmr31sF&t=1863
Here is an Amazon affiliate link to the USB extension cable I'm using in the video. amzn.to/4dsc9rp
Many of these are very similar but may not have the exact same dimensions. If the one you get doesn't exactly fit try using the skills you learn from this video to make it fit!
File used in this video can be found on my github at:
github.com/stvptrsn/Printer_Stuff/tree/main/Fusion_Fun/USB_Hex_Insert
Thanks to AJAX and his TD-1 design for the inspiration to use filament as the method of holding the connector in place!
---------------------------------------------------------------------------------------------------------------------
Steve Builds Discord - discord.gg/DJbhHZA7V5
Printables Profile: printables.com/social/9363-steve/about
Voron Usermods Github: github.com/VoronDesign/VoronUsers/tree/master/printer_mods/StvPtrsn
My personal Github: github.com/stvptrsn
---------------------------------------------------------------------------------------------------------------------
Affiliate Links if you'd like to help out the channel:
Polymaker: us.polymaker.com/?aff=240
Amazon Shop (I've linked many of the tools I use)
amazon.com/shop/stevebuilds
amzn.to/3sqACL5 (direct link to tools list)
OpenBuilds
openbuildspartstore.com/?ref=I_sNuucjrNmJZL
openbuildspartstore.com/slot-cover-panel-holder/?ref=I_sNuucjrNmJZL (slot covers)
On the Tuesday, April 30th livestream, we spent some time in Fusion360 designing a insert to hold a USB extension cable in the typical skirt used on a Voron Trident or 2.4. This USB cable is intended to plug into the Raspberry Pi or alternative SBC and provide an accessible USB port in the front skirt.
In this video I go through the process to revise the model.
Be sure to watch the replay of the stream, here is a time stamped link to where we started modeling.
youtube.com/live/MKXrtHEKLhk?si=UPsRdmnYcFmr31sF&t=1863
Here is an Amazon affiliate link to the USB extension cable I'm using in the video. amzn.to/4dsc9rp
Many of these are very similar but may not have the exact same dimensions. If the one you get doesn't exactly fit try using the skills you learn from this video to make it fit!
File used in this video can be found on my github at:
github.com/stvptrsn/Printer_Stuff/tree/main/Fusion_Fun/USB_Hex_Insert
Thanks to AJAX and his TD-1 design for the inspiration to use filament as the method of holding the connector in place!
---------------------------------------------------------------------------------------------------------------------
Steve Builds Discord - discord.gg/DJbhHZA7V5
Printables Profile: printables.com/social/9363-steve/about
Voron Usermods Github: github.com/VoronDesign/VoronUsers/tree/master/printer_mods/StvPtrsn
My personal Github: github.com/stvptrsn
---------------------------------------------------------------------------------------------------------------------
Affiliate Links if you'd like to help out the channel:
Polymaker: us.polymaker.com/?aff=240
Amazon Shop (I've linked many of the tools I use)
amazon.com/shop/stevebuilds
amzn.to/3sqACL5 (direct link to tools list)
OpenBuilds
openbuildspartstore.com/?ref=I_sNuucjrNmJZL
openbuildspartstore.com/slot-cover-panel-holder/?ref=I_sNuucjrNmJZL (slot covers)
