Uploaded April 2021 | Updated November 2026, 3 days ago
When thin extrudes were first introduced back in January, it was only capable of extruding closed profiles. In the April update, it has finally been made available for open profiles as well.
If you have found this video useful and would like to support me, you can buy me a coffee at
buymeacoffee.com/fusion360school
or you can also support me on Patreon at
patreon.com/fusion360school?fan_landing=true
Any contribution can go towards improving the quality of the channel. Thank you.
#fusion360school
#fusion360thinextrude
#fusion360thinextrudeopenprofile
0:00 Intro
0:11 Basic premise of thin extrudes
0:25 Heat fins
1:29 Thickness direction of thin extrude
1:57 Intricate thin wall pattern
2:18 Fish bait
3:43 Sheet metal-like bodies
4:15 Web vs thin extrude
When thin extrudes were first introduced back in January, it was only capable of extruding closed profiles. In the April update, it has finally been made available for open profiles as well.
If you have found this video useful and would like to support me, you can buy me a coffee at
buymeacoffee.com/fusion360school
or you can also support me on Patreon at
patreon.com/fusion360school?fan_landing=true
Any contribution can go towards improving the quality of the channel. Thank you.
#fusion360school
#fusion360thinextrude
#fusion360thinextrudeopenprofile
0:00 Intro
0:11 Basic premise of thin extrudes
0:25 Heat fins
1:29 Thickness direction of thin extrude
1:57 Intricate thin wall pattern
2:18 Fish bait
3:43 Sheet metal-like bodies
4:15 Web vs thin extrude










