Uploaded September 2019 | Updated September 2026, 2 weeks ago
Learn how to surface model a hairdryer in Fusion 360. This tutorial is aimed at intermediate-level users or those who understand the basic functionality of Fusion 360. Therefore, I won’t be walking you through every single little detail, such as setting up the reference image.
TUTORIAL RESOURCES
1. This tutorial's resource page ➞ ProductDesignOnline.com/12
2. View my checklists for Fusion 360 beginners ➞ bit.ly/f360checklist
3. Join us on Patreon ➞ patreon.com/productdesignonline
TOP FUSION 360 PLAYLISTS
bit.ly/learn-fusion360
bit.ly/woodworker-playlist
bit.ly/3D-printing-playlist
bit.ly/sculpt-playlist
SUBSCRIBE for more high-quality Fusion 360 tutorials! ➞ bit.ly/sub-right-now
________________________________
MY PREMIUM COURSES
2 Months FREE ➞ bit.ly/courses-free
QUESTION
Have a question about Fusion 360? Post it in the comments section of this video!
TIMESTAMPS
0:00 - Surface Modeling a Hairdryer in Fusion 360
0:43 - Getting the reference image
2:07 - Setting up the sketch geometry
5:42 - Revolving the top of the dryer
7:42 - Creating the handle sketch geometry
12:04 - Looking at the curvature comb
12:49 - Extruing the surface geometry
18:00 - Lofting the handle geometry
19:37 - Reversing the surface appearance
21:58 - Stitching and trimming the surfaces
23:57 - Splitting the body at the parting line
24:27 - Using the draft analysis
26:43 - Zebra analysis and curvature map analysis
DISCLAIMER
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps you support the channel at no extra cost to you and allows me to continue to make videos like this.
—
#Fusion360 #ProductDesignOnline
Learn how to surface model a hairdryer in Fusion 360. This tutorial is aimed at intermediate-level users or those who understand the basic functionality of Fusion 360. Therefore, I won’t be walking you through every single little detail, such as setting up the reference image.
TUTORIAL RESOURCES
1. This tutorial's resource page ➞ ProductDesignOnline.com/12
2. View my checklists for Fusion 360 beginners ➞ bit.ly/f360checklist
3. Join us on Patreon ➞ patreon.com/productdesignonline
TOP FUSION 360 PLAYLISTS
bit.ly/learn-fusion360
bit.ly/woodworker-playlist
bit.ly/3D-printing-playlist
bit.ly/sculpt-playlist
SUBSCRIBE for more high-quality Fusion 360 tutorials! ➞ bit.ly/sub-right-now
________________________________
MY PREMIUM COURSES
2 Months FREE ➞ bit.ly/courses-free
QUESTION
Have a question about Fusion 360? Post it in the comments section of this video!
TIMESTAMPS
0:00 - Surface Modeling a Hairdryer in Fusion 360
0:43 - Getting the reference image
2:07 - Setting up the sketch geometry
5:42 - Revolving the top of the dryer
7:42 - Creating the handle sketch geometry
12:04 - Looking at the curvature comb
12:49 - Extruing the surface geometry
18:00 - Lofting the handle geometry
19:37 - Reversing the surface appearance
21:58 - Stitching and trimming the surfaces
23:57 - Splitting the body at the parting line
24:27 - Using the draft analysis
26:43 - Zebra analysis and curvature map analysis
DISCLAIMER
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps you support the channel at no extra cost to you and allows me to continue to make videos like this.
—
#Fusion360 #ProductDesignOnline
