Uploaded March 2021 | Updated November 2026, 2 hours ago
Different ways of creating overmolds. When it comes to creating overmolds, there are usually two main aspects. The surface usually blends with the main body. And a recess has to be created on the base plastic to accommodate the overmold.
If you have found this video useful and would like to support me, you can buy me a coffee at
buymeacoffee.com/fusion360school
or you can also support me on Patreon at
patreon.com/fusion360school?fan_landing=true
Any contribution can go towards improving the quality of the channel. Thank you.
#fusion360school
#fusion360overmold
0:00 Intro
0:55 Split body, shell and boundary fill
3:22 Copy body, split body, shell and combine cut
4:48 Split face, offset face, copy face, thicken
6:12 Split face, copy face, thicken cut, thicken
Different ways of creating overmolds. When it comes to creating overmolds, there are usually two main aspects. The surface usually blends with the main body. And a recess has to be created on the base plastic to accommodate the overmold.
If you have found this video useful and would like to support me, you can buy me a coffee at
buymeacoffee.com/fusion360school
or you can also support me on Patreon at
patreon.com/fusion360school?fan_landing=true
Any contribution can go towards improving the quality of the channel. Thank you.
#fusion360school
#fusion360overmold
0:00 Intro
0:55 Split body, shell and boundary fill
3:22 Copy body, split body, shell and combine cut
4:48 Split face, offset face, copy face, thicken
6:12 Split face, copy face, thicken cut, thicken










