Fusion 360 - Groot needs a base (using STL/Mesh for reference) @KristianLaholm
Fusion 360 - Groot needs a base (using STL/Mesh for reference)  @KristianLaholm
Uploaded March 2022 | Updated November 2026, 2 days ago
This is how you can use an STL (Mesh) for reference in Solid modeling, without the need to convert the Mesh in to solid.

More info on the tool here: help.autodesk.com/view/fusion360/ENU/?guid=MESH-CREATE-MESH-SECTION-SKETCH

0:00 Intro
1:00 Inser Mesh (STL)
1:40 Check Mesh warnings
2:15 Sketch Base
2:24 Extrude Base
3:30 Mesh Section Sketch
4:11 Edit Sketch
4:20 Fit Curves to Mesh Section
5:05 Extrude Cut
5:40 Section Analyzes
6:14 Scale in X and Y direction
7:00 Inspecting clearance
Fusion 360 - Groot needs a base (using STL/Mesh for reference)Fusion 360 Challenge July 2021 - Twist StripFusion 360 Basic - Anchor PostPyramid and Twisted Pyramid in Fusion 360 - (Sweep with twist angle)Autodesk Fusion: Broken Canvas Controls? Use a Sketch InsteadFusion 360 - Strange Cube my WorkflowJulKulan2020 - My attempt on designing a Christmas Ornament.Fusion 360 - STL fail to convert - Some tips on how to fixHexagon Pattern of Circles with the help of Driven Dimensions - Autodesk FusionMy Thought Process for solving the Tetrahedron and Octahedron in Fusion 360Fusion 360 - Too Tall Toby Sheet Metal Hanger ExerciseHirth / Rosette joint in Fusion 360 (no trigonometri)
Kristian_Laholm |

Fusion 360 - Groot needs a base (using STL/Mesh for reference)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER