Fusion 360 - Case Study 7 @Fusion360School
Fusion 360 - Case Study 7  @Fusion360School
Uploaded September 2020 | Updated November 2026, 3 hours ago
In this case study, we will use the intersection curve command to construct a framework for building a patchwork of surfaces.

Side note: Looking at this case study, I probably could have created a plane at an angle to perform the sketch since the desired curve has a straight profile when looking at the side. However, I want to stress that the intersection curve command would still work even if the side profile is not straight.

If you have found this video useful and would like to support me, you can buy me a coffee at
buymeacoffee.com/fusion360school
or you can also support me on Patreon at
patreon.com/fusion360school?fan_landing=true

Any contribution can go towards improving the quality of the channel. Thank you.

#fusion360school
#fusion360intersectioncurve
Fusion 360 - Case Study 7Fusion 360 | Flex designAutodesk Fusion | Crease (Surfacing)Fusion 360 - Extrude To Object Min/MaxAutodesk Fusion - Cut on Parallelogram ShellFusion 360 | Thin Extrude vs Web vs RibFusion 360 | Case Study 20 (Indent)Fusion 360 | Clearance for Moving ComponentsFusion 360 - Honeycomb Sphere (Full Narrated Tutorial)Fusion 360 | Surrogate Deboss?Fusion 360 | Case Study 18Autodesk Fusion | How many ways?
Fusion 360 School |

Fusion 360 - Case Study 7

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER