Uploaded December 2020 | Updated November 2026, 1 hour ago
Today, we are going to look at how we can create the housing surrounding the fan of the Arctic Freezer 50.
Take a look at the product pictures using the following link:
https://www.arctic.ac/en/Freezer-50/ACFRE00065A
If you have found this video useful and would like to support me, you can buy me a coffee at
buymeacoffee.com/fusion360school
or you can also support me on Patreon at
patreon.com/fusion360school?fan_landing=true
Any contribution can go towards improving the quality of the channel. Thank you.
#fusion360school
#fusion360casestudy
0:00 Intro
0:48 Overview
1:04 Main extrude
2:58 Draft
3:28 Lofted cut
5:43 Center slot
6:36 Offset faces
9:13 Mirror
Today, we are going to look at how we can create the housing surrounding the fan of the Arctic Freezer 50.
Take a look at the product pictures using the following link:
https://www.arctic.ac/en/Freezer-50/ACFRE00065A
If you have found this video useful and would like to support me, you can buy me a coffee at
buymeacoffee.com/fusion360school
or you can also support me on Patreon at
patreon.com/fusion360school?fan_landing=true
Any contribution can go towards improving the quality of the channel. Thank you.
#fusion360school
#fusion360casestudy
0:00 Intro
0:48 Overview
1:04 Main extrude
2:58 Draft
3:28 Lofted cut
5:43 Center slot
6:36 Offset faces
9:13 Mirror










