Made with Layers (Thomas Sanladerer) | Fully automated 3D printing using REAL print beds! @MadeWithLayers | Uploaded July 2021 | Updated October 2024, 6 days ago.
Sure, there are solutions available that promise "automated" 3D printing - but they all fall short when they need to print particularly thin or warp-happy parts. So I set out to build a system that uses real magnetic beds and is able to automatically swap in a fresh one in after every print. And I'm happy to report that it works flawlessly!
Thanks to Boxomo Enclosures for sponsoring this video! Check them out at boxomoenclosures.com
Some of the parts used:
Magnetic PEI beds from Energetic go.toms3d.org/EnergyPEI
Silicone heater go.toms3d.org/HotSilica
Geared stepper motor go.toms3d.org/NemaG
Salvaged bits from random cheap printers youtube.com/playlist?list=PLDJMid0lOOYn2zty5n3pgSQuTjFnYvUaA
Filaments used:
DAS FILAMENT B+ PETG go.toms3d.org/DAS
Prusament ASA (for the bed frames) go.toms3d.org/Prusament
Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)
🎥 All my video gear toms3d.org/my-gear
I use Epidemic Sound, sign up for a 30-day free trial here share.epidemicsound.com/MadeWithLayers
🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Sure, there are solutions available that promise "automated" 3D printing - but they all fall short when they need to print particularly thin or warp-happy parts. So I set out to build a system that uses real magnetic beds and is able to automatically swap in a fresh one in after every print. And I'm happy to report that it works flawlessly!
Thanks to Boxomo Enclosures for sponsoring this video! Check them out at boxomoenclosures.com
Some of the parts used:
Magnetic PEI beds from Energetic go.toms3d.org/EnergyPEI
Silicone heater go.toms3d.org/HotSilica
Geared stepper motor go.toms3d.org/NemaG
Salvaged bits from random cheap printers youtube.com/playlist?list=PLDJMid0lOOYn2zty5n3pgSQuTjFnYvUaA
Filaments used:
DAS FILAMENT B+ PETG go.toms3d.org/DAS
Prusament ASA (for the bed frames) go.toms3d.org/Prusament
Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)
🎥 All my video gear toms3d.org/my-gear
I use Epidemic Sound, sign up for a 30-day free trial here share.epidemicsound.com/MadeWithLayers
🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
