Uploaded August 2026 | Updated November 2026, 14 hours ago
There are many different fuel systems out there, and each airplane manufacturer tends to have their own proprietary style. This video shows a common fuel system and what you can expect in training. ⛽️✈️
In most light twins, there are 2 to 4 main fuel tanks, almost always located in the wings, with the left engine pulling fuel from the left tanks, and the right engine pulling from the right tanks. Other common fuel tanks are center tanks and wing tip tanks.
Now, depending on the plane’s fuel system, there are several ways to get the fuel from the tanks to the engines. The most common systems are engine-driven fuel pumps, electric fuel pumps, and gravity-fed systems in the case of some high-wing twins.
The basic concept is that there are two separate, mostly identical systems that are going to push fuel to the desired engine. On the fuel panel in the cockpit, you will select which tanks are to be used, then fuel will be pulled through a filter to an engine-driven fuel pump. In the fuel pump, a vapor separator will remove any excess fluid or air, then pressurize the remaining fuel to send to the fuel control unit. This fuel control unit manages the fuel flow to the manifold and injectors in relation to the mixture and RPM settings.
The electric fuel pumps, otherwise known as electric “boost” pumps, are mostly used for redundancy, engine priming, engine start, and to help maintain pressure in the tanks to prevent vapor lock during critical phases of flight. Electric boost pumps can also be used for a new concept, “crossfeeding”, which we’ll discuss in our next video.
#flygoldseal #studentpilot #flighttraining #privatepilot #learntofly #pilottraining #flightschool #generalaviation #cfi #fuelsystem #twinengine
There are many different fuel systems out there, and each airplane manufacturer tends to have their own proprietary style. This video shows a common fuel system and what you can expect in training. ⛽️✈️
In most light twins, there are 2 to 4 main fuel tanks, almost always located in the wings, with the left engine pulling fuel from the left tanks, and the right engine pulling from the right tanks. Other common fuel tanks are center tanks and wing tip tanks.
Now, depending on the plane’s fuel system, there are several ways to get the fuel from the tanks to the engines. The most common systems are engine-driven fuel pumps, electric fuel pumps, and gravity-fed systems in the case of some high-wing twins.
The basic concept is that there are two separate, mostly identical systems that are going to push fuel to the desired engine. On the fuel panel in the cockpit, you will select which tanks are to be used, then fuel will be pulled through a filter to an engine-driven fuel pump. In the fuel pump, a vapor separator will remove any excess fluid or air, then pressurize the remaining fuel to send to the fuel control unit. This fuel control unit manages the fuel flow to the manifold and injectors in relation to the mixture and RPM settings.
The electric fuel pumps, otherwise known as electric “boost” pumps, are mostly used for redundancy, engine priming, engine start, and to help maintain pressure in the tanks to prevent vapor lock during critical phases of flight. Electric boost pumps can also be used for a new concept, “crossfeeding”, which we’ll discuss in our next video.
#flygoldseal #studentpilot #flighttraining #privatepilot #learntofly #pilottraining #flightschool #generalaviation #cfi #fuelsystem #twinengine










