Uploaded January 2023 | Updated November 2026, 2 days ago
When you first got your FT-891, the only accessory that came with it was the microphone, your rig is much more capable, beyond using the voice modes, then many people suspect.
Unfortunately, these extra capabilities come with the cost.
In this video, I will be using a signal link external sound card, a WinKeyer external keyer, and of course the HRD program. All of these are an extra cost, but all of them are one-time costs, and each of them add a lot to appreciating and enjoying the time you spend with your rig. All in all, I believe it is a fair trade, or investment, for your hobby.
Links:
Signalink Setup Video: youtu.be/koAXRyDHBhw
HRD Setup Video: youtu.be/BT5gyS17uRU
Signalink Webpage: tigertronics.com/slusbmain.htm
HRO SignaLink: hamradio.com/detail.cfm?pid=H0-009906
WinKeyer USB: hamcrafters2.com/WKUSBX.html
HRD Purchase: hamradiodeluxe.com/buy/HRDPSL.html
Chapters:
00:01 Introduction
01:53 CW Menu Settings
06:11 CW Functions
10:59 PSK (DATA) Menu Settings
13:28 PSK (DATA) Function Settings
14:50 Initial SignaLink Settings
16:12 CW Demo
16:51 PSK Demo
18:45 Summary and End Notes
Settings
General:
02-06: ZIN LED – ENABLE
05-06 CAT RATE = Make Note
05-07 CAT TOT = 100 mSec
05-08 CAT RTS = Disable
CW Menu Settings:
01-01: AGC FAST DELAY – 300msec
04-01: KEYER TYPE – ELEKEY-B
04-02: KEYER DOT/DASH – Set as required, usually NOR
04-03: CW Weight – Set to your taste and style – default 3.0
07-01: CW LCUT FREQ – Set to 100-150Hz below BFO Freq
07-02: CW LCUT Slope – 18dB/oct
07-03: CW HCUT FREQ – Set to 100-150Hz above BFO Freq
07-04: CW HCUT Slope – 18dB/oct
07-05: CW OUT LEVEL – Default 50, probably needs less
07-07: CW BFO – AUTO
07-08: CW BK-IN TYPE – SEMI
07-09: CW BK-IN DELAY – 200msec (tweak up if needed)
12-01: APF Width - Narrow
16:02: HF PWR – set as needed to maintain reliable communications (5-100W)
CW Functions Settings:
Function 1
TNR - If available
VOX - Disable
PRC - Disable
MON – As required
SPL - Disable
IPO – If Needed
ATT – If needed
NAR – Enable
NB - Disable
SFT – 0 Hz
WDH – 100-150 Hz
NCH – As needed
Function 2
MTR – As needed
SCP – As needed
AGC - Auto
DNR – As needed
DNF – As needed
CNT - Disable
MOX - Disable
TXW - Disable
MEG - Disable
QMB – If needed
CW Setting Screen (Functions)
Speed – Set for Comfort
ZIN – Enable
APF – As needed = Audio Peak Filter
Pitch – Set for Comfort
Keyer – Disable
BK-IN – Enable
DATA Menu Settings
01-02 AGC MID Delay = 700 (default)
07-12 PC Keying = OFF
08-01 Data Mode = Others
08-03 Other Display = 0
08-04 Other Shift = 0
08-05 DATA LCUT Freq = 100 Hz
08-06 DATA LCUT Slope = 18 dB/Oct
08-07 DATA HCUT Freq = 3000 Hz
08-08 DATA HCUT Slope = 18 dB/Oct
08-09 DATA In Select = Rear
08-10 DATA PTT Select = DAKY
08-12 DATA BFO = USB (Change to LSB if S/W requires that, but most don’t)
16-03 HF PWR = 50 (or less)
DATA Functions Settings
Function Settings
Function-1
TNR – as required
VOX – Disable
PRC – Disable
MON – Comfort level
SPL – Disable
IPO – Disable
ATT – Disable
NAR – Disable
NB – Disable
SFT - 0 Hz
WDH – 3000 Hz
NCH – Disable
Set SignaLink (initial) TX – Mid range, RX – Mid range, Delay – fully CCW
Thanks for watching – please remember to Like, Share, Comment, and Subscribe…
73 y’all de Tom, ND3N
When you first got your FT-891, the only accessory that came with it was the microphone, your rig is much more capable, beyond using the voice modes, then many people suspect.
Unfortunately, these extra capabilities come with the cost.
In this video, I will be using a signal link external sound card, a WinKeyer external keyer, and of course the HRD program. All of these are an extra cost, but all of them are one-time costs, and each of them add a lot to appreciating and enjoying the time you spend with your rig. All in all, I believe it is a fair trade, or investment, for your hobby.
Links:
Signalink Setup Video: youtu.be/koAXRyDHBhw
HRD Setup Video: youtu.be/BT5gyS17uRU
Signalink Webpage: tigertronics.com/slusbmain.htm
HRO SignaLink: hamradio.com/detail.cfm?pid=H0-009906
WinKeyer USB: hamcrafters2.com/WKUSBX.html
HRD Purchase: hamradiodeluxe.com/buy/HRDPSL.html
Chapters:
00:01 Introduction
01:53 CW Menu Settings
06:11 CW Functions
10:59 PSK (DATA) Menu Settings
13:28 PSK (DATA) Function Settings
14:50 Initial SignaLink Settings
16:12 CW Demo
16:51 PSK Demo
18:45 Summary and End Notes
Settings
General:
02-06: ZIN LED – ENABLE
05-06 CAT RATE = Make Note
05-07 CAT TOT = 100 mSec
05-08 CAT RTS = Disable
CW Menu Settings:
01-01: AGC FAST DELAY – 300msec
04-01: KEYER TYPE – ELEKEY-B
04-02: KEYER DOT/DASH – Set as required, usually NOR
04-03: CW Weight – Set to your taste and style – default 3.0
07-01: CW LCUT FREQ – Set to 100-150Hz below BFO Freq
07-02: CW LCUT Slope – 18dB/oct
07-03: CW HCUT FREQ – Set to 100-150Hz above BFO Freq
07-04: CW HCUT Slope – 18dB/oct
07-05: CW OUT LEVEL – Default 50, probably needs less
07-07: CW BFO – AUTO
07-08: CW BK-IN TYPE – SEMI
07-09: CW BK-IN DELAY – 200msec (tweak up if needed)
12-01: APF Width - Narrow
16:02: HF PWR – set as needed to maintain reliable communications (5-100W)
CW Functions Settings:
Function 1
TNR - If available
VOX - Disable
PRC - Disable
MON – As required
SPL - Disable
IPO – If Needed
ATT – If needed
NAR – Enable
NB - Disable
SFT – 0 Hz
WDH – 100-150 Hz
NCH – As needed
Function 2
MTR – As needed
SCP – As needed
AGC - Auto
DNR – As needed
DNF – As needed
CNT - Disable
MOX - Disable
TXW - Disable
MEG - Disable
QMB – If needed
CW Setting Screen (Functions)
Speed – Set for Comfort
ZIN – Enable
APF – As needed = Audio Peak Filter
Pitch – Set for Comfort
Keyer – Disable
BK-IN – Enable
DATA Menu Settings
01-02 AGC MID Delay = 700 (default)
07-12 PC Keying = OFF
08-01 Data Mode = Others
08-03 Other Display = 0
08-04 Other Shift = 0
08-05 DATA LCUT Freq = 100 Hz
08-06 DATA LCUT Slope = 18 dB/Oct
08-07 DATA HCUT Freq = 3000 Hz
08-08 DATA HCUT Slope = 18 dB/Oct
08-09 DATA In Select = Rear
08-10 DATA PTT Select = DAKY
08-12 DATA BFO = USB (Change to LSB if S/W requires that, but most don’t)
16-03 HF PWR = 50 (or less)
DATA Functions Settings
Function Settings
Function-1
TNR – as required
VOX – Disable
PRC – Disable
MON – Comfort level
SPL – Disable
IPO – Disable
ATT – Disable
NAR – Disable
NB – Disable
SFT - 0 Hz
WDH – 3000 Hz
NCH – Disable
Set SignaLink (initial) TX – Mid range, RX – Mid range, Delay – fully CCW
Thanks for watching – please remember to Like, Share, Comment, and Subscribe…
73 y’all de Tom, ND3N






