Uploaded March 2021 | Updated September 2026, 13 hours ago

---

Hi everyone! Today I’m going to show you how to install front upper control arm offset bushings on a Honda S2000. Offset bushings are a really easy way to get some additional front camber and also fit wide front wheels. They can be particularly helpful in certain racing classes since they typically do not incur any additional points.

Note: I did not install the set screws from the Baero kit. They are not even included in the Origin Fabrication kit.

Thanks to Austin for letting me film this install on his S2000!

Follow me on Instagram for more Honda S2000 content: instagram.com/diyguystv

Tools/Parts necessary:
- Offset Bushings: https://baero.tech/s2000-suspension/offset-upper-control-arm-bushings
- Sockets: 10mm, 17mm (shallow), 24mm (deep), 1 3/4" (or equivalent)
- Wrenches: 10mm
- Spare Hex Nut 12 X 1.25mm (used with ball joint separator)
- Ball Joint Separator Tool: amzn.to/3lkw80v
- 1/2" Torque Wrench: amzn.to/3bOcXJA
- Hydraulic Press or Large Bench Vise (Can also have a shop press them in): harborfreight.com/20-ton-shop-press-32879.html
- Grease: amzn.to/3vp5msv
- Cotter Pins: amzn.to/2OzO2QS