Uploaded May 2015 | Updated November 2026, 1 minute ago
Here's a way to take a sample from Igus and turn it into an almost free camera slider!
UPDATE (5/11/15): Igus contacted me and explained that they have been swamped with over 1,000 requests for their free sample toolkit, which they were unprepared for. At their request, I have removed the link so they can address the demand. I plan to work with them to see if there is still some way to get these parts, hopefully at a free or minimal cost to Frugal Filmmakers.
Stuff I use: amazon.com/shop/thefrugalfilmmaker
Original "Itsy Bitsy Slider" blog post
filmflap.blogspot.com/2014/12/r-itsy-bitsy-camera-slider.html
Glide Gear DEV 1000 slider review
filmflap.blogspot.com/2015/04/review-glide-gear-dev-1000-camera-slider.html
PARTS LIST
Igus slider sample
2x 1/4-20" wing nuts
3x 1/4-20" screws (1" in length)
1/4" neoprene fender washer
Manfrotto Clone quick release system rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575055920&toolid=10001&campid=5337372659&customid=&icep_item=261849245352&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg
TOOLS NEEDED
Drill press
13/64" drill bit
1/4-20 metal tap harborfreight.com/hand-tools/tap-die/21-pc-carbon-steel-sae-tap-and-die-set-69679.html
Combination alan wrench harborfreight.com/2-pc-sae-metric-folding-hex-key-set-62162.html
Music - "Death by Candlelight"
freesound.org/people/FoolBoyMedia/sounds/217799
Blog: thefrugalfilmmaker.com
Facebook Group: facebook.com/groups/thefrugalfilmmaker
Twitter Feed: twitter.com/frugalfilmmaker
Here's a way to take a sample from Igus and turn it into an almost free camera slider!
UPDATE (5/11/15): Igus contacted me and explained that they have been swamped with over 1,000 requests for their free sample toolkit, which they were unprepared for. At their request, I have removed the link so they can address the demand. I plan to work with them to see if there is still some way to get these parts, hopefully at a free or minimal cost to Frugal Filmmakers.
Stuff I use: amazon.com/shop/thefrugalfilmmaker
Original "Itsy Bitsy Slider" blog post
filmflap.blogspot.com/2014/12/r-itsy-bitsy-camera-slider.html
Glide Gear DEV 1000 slider review
filmflap.blogspot.com/2015/04/review-glide-gear-dev-1000-camera-slider.html
PARTS LIST
Igus slider sample
2x 1/4-20" wing nuts
3x 1/4-20" screws (1" in length)
1/4" neoprene fender washer
Manfrotto Clone quick release system rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575055920&toolid=10001&campid=5337372659&customid=&icep_item=261849245352&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg
TOOLS NEEDED
Drill press
13/64" drill bit
1/4-20 metal tap harborfreight.com/hand-tools/tap-die/21-pc-carbon-steel-sae-tap-and-die-set-69679.html
Combination alan wrench harborfreight.com/2-pc-sae-metric-folding-hex-key-set-62162.html
Music - "Death by Candlelight"
freesound.org/people/FoolBoyMedia/sounds/217799
Blog: thefrugalfilmmaker.com
Facebook Group: facebook.com/groups/thefrugalfilmmaker
Twitter Feed: twitter.com/frugalfilmmaker










