Uploaded June 2021 | Updated September 2026, 3 hours ago
Woohoo at long last we have a successor to the BMS Raptor series V1! Really pleased with the results of these. Fun-fact, since the release of these motors, my main fleet shares no parts besides the frame with how it was back in 2019, and the weight of our quads has dropped from ~295g to ~266g with increases in power from the powertrain! For more information on the motors themselves, visit our main YouTube video here: youtube.com/watch?v=B0K0s1Pqfv8
My official motor write-up:
The BMS Raptor V2 is every bit the same spirit as the original Raptor series, but amplified. The core focus of its development was simple, outperform the BMS Raptor series V1 motors in every aspect. To achieve this we analysed each component in detail, to find new ways to extract the next level of performance.
We began by adding lightness where possible, especially focusing on the rotating components of the Raptor V2. This increased the response of the motor, allowing for an even more razor sharp in-flight feel, and increased efficiency across the entire throttle range.
Next we overhauled the electrical components, which improved the heat management of the stator, allowing the Raptor V2 to run at higher output, for longer.
All these improvements allowed us to redesign the static components of the motor to allow for 'race durability', which is enough durability to handle the volatile environment of a racetrack without harming the characteristics and performance of the motor.
The shape of the Raptor V2 was directly influenced by the Raptor V1, and sculpted by the pursuit of lightness. It features a new Bronze finish, which works well with a wide range of color schemes, and helps to accentuate the lines and shape of the motor.
That is the BMS Raptor V2 motor. A no compromise successor featuring higher performance, updated looks and a lot of love from the BMS and T-Motor family. Happy flying!
BMSThomas Youtube: youtube.com/channel/UCxgr5RBxmJjY8xfMQznt-dQ?
BMSRacing Youtube: youtube.com/user/BMSWEB
BMSThomas Instagram: instagram.com/bmsthomas_
BMSRacing Instagram: instagram.com/bmsweb
Hope you enjoy it. Comments and Questions down below :)
Setup used in this video:
Frame: BMSRacing JS-1
Motors: BMS Raptor V2
ESC: Hobbywing 40a (20x20)
FC: Foxeer F722 Mini (20x20)
Cam: Foxeer Predator V4 (1.7)
VTX: TBS Unify Pro32 Nano
RX: TBS Tracer Nano
Props: HQProp R42
Battery: Tattu 6s 1300mah V3
Controller: Radiomaster TX16s Max
Goggle Module: TBS Fusion
Song: tubebackr - Dance till you die
Woohoo at long last we have a successor to the BMS Raptor series V1! Really pleased with the results of these. Fun-fact, since the release of these motors, my main fleet shares no parts besides the frame with how it was back in 2019, and the weight of our quads has dropped from ~295g to ~266g with increases in power from the powertrain! For more information on the motors themselves, visit our main YouTube video here: youtube.com/watch?v=B0K0s1Pqfv8
My official motor write-up:
The BMS Raptor V2 is every bit the same spirit as the original Raptor series, but amplified. The core focus of its development was simple, outperform the BMS Raptor series V1 motors in every aspect. To achieve this we analysed each component in detail, to find new ways to extract the next level of performance.
We began by adding lightness where possible, especially focusing on the rotating components of the Raptor V2. This increased the response of the motor, allowing for an even more razor sharp in-flight feel, and increased efficiency across the entire throttle range.
Next we overhauled the electrical components, which improved the heat management of the stator, allowing the Raptor V2 to run at higher output, for longer.
All these improvements allowed us to redesign the static components of the motor to allow for 'race durability', which is enough durability to handle the volatile environment of a racetrack without harming the characteristics and performance of the motor.
The shape of the Raptor V2 was directly influenced by the Raptor V1, and sculpted by the pursuit of lightness. It features a new Bronze finish, which works well with a wide range of color schemes, and helps to accentuate the lines and shape of the motor.
That is the BMS Raptor V2 motor. A no compromise successor featuring higher performance, updated looks and a lot of love from the BMS and T-Motor family. Happy flying!
BMSThomas Youtube: youtube.com/channel/UCxgr5RBxmJjY8xfMQznt-dQ?
BMSRacing Youtube: youtube.com/user/BMSWEB
BMSThomas Instagram: instagram.com/bmsthomas_
BMSRacing Instagram: instagram.com/bmsweb
Hope you enjoy it. Comments and Questions down below :)
Setup used in this video:
Frame: BMSRacing JS-1
Motors: BMS Raptor V2
ESC: Hobbywing 40a (20x20)
FC: Foxeer F722 Mini (20x20)
Cam: Foxeer Predator V4 (1.7)
VTX: TBS Unify Pro32 Nano
RX: TBS Tracer Nano
Props: HQProp R42
Battery: Tattu 6s 1300mah V3
Controller: Radiomaster TX16s Max
Goggle Module: TBS Fusion
Song: tubebackr - Dance till you die
