FPV Peace Drone v2 @ExperimentalAirlines
FPV Peace Drone v2  @ExperimentalAirlines
Uploaded December 2011 | Updated September 2026, 2 weeks ago
The Peace Drone, designed for FPV ("first person view") flying. Uses the simple construction Armin Wing airfoil. It's very easy and forgiving to fly due to the canard configuration and low wing loading. It flies slow, glides well, and is very difficult to stall. The pusher prop stays out of the camera field of view. Weight is 1300g with basic FPV setup and single battery for 10 minute flights. Easy to build out of 4 sheets of Readi-Board from Dollar Tree, hot glue, and packing tape. All construction cuts are straight and square. 1100kV motor and 10x4.5 prop gives about 800g of static thrust. It collapses to a size of 8x8x32" for storage and transport.

Named the "Peace Drone" in contrast to the Predator, Reaper, etc. military drones. I'm kind of bummed by the bad press UAV's are getting lately by killing and spying. The Peace Drone is made for FPV fun only.

The FPV setup is a 200mw 5.8gHz from Hobby King with their cheapest 1/3" CCD Sony board camera (no case) and stock antennas.

Intro music: "Always More" by Steve Anderson, copyright SAME Recordings

Canard CG calculator here: adamone.rchomepage.com/cg_canard.htm

Motor used here, with 10x4.5 semi-APC:

hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=18969

rctimer.com/index.php?gOo=goods_details.dwt&goodsid=130&productname=

Thanks for watching! Remarks and questions are welcome.
FPV Peace Drone v2CONTEST! - Foamboard Scratchbuild, Fly, and VideoSCRATCHBUILDING CONTEST!FAST FOAMBOARD DELTA WING - FlyingSCRATCHBUILT SEAPLANE CONTEST WINNERSPHOTON - Fuselage part 2: Joining and Wing MountsFUGLYJET EDF Scratchbuilt FoamieRC-69 Cargo Dropper - Details and SpecsSYNAPSE BUILD: Wing MountingSYNAPSE BUILD: Vertical StabilizersFPV: SAN DIEGO - Mission Beach/BaySYNAPSE BUILD: Motor Choice and Mounting
Experimental Airlines |

FPV Peace Drone v2

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER