Sillybutts | Foxbat: Full blaster overview! (Released Publicly!) @Sillybutts | Uploaded August 2024 | Updated October 2024, 2 hours ago.
Foxbat is a magazine-in-grip, top slide prime, angled talon OR straight talon, HANDCANNON of a pistol!
The blaster, hardware kits, and prints are RELEASED!
Files are available for FREE on my Printables page! printables.com/model/969546-foxbat-mag-in-grip-handcannon-pistol-printed-nerf
Hardware kits are available from OutOfDarts and SilverFoxIndustries!
- outofdarts.com/products/sillybutts-foxbat-hardware-kit
- https://silverfoxindustries.shop/products/foxbat-by-sillybutts-hardware-kit
Here's some info:
* Top slide prime, T pull prime, and optional PUMP ACTION prime!
* Straight Talon and Angled Talon compatible, just swap over the grip and trigger!
* Super cheap hardware cost (its like $26 to get a HW kit, almost HALF the cost of a Zinc or Gecko hardware kit).
* The blaster was designed around 130-220 FPS spring and barrel combos, but its relatively easy to go as low as 100 FPS, or as high as 270+ FPS!
* 9" barrel as standard, compatible with longer barrels for extra power.
* Compatible with Worker-style SCARs (DartZone SCAR, Whisker SCAR, etc) (the muzzle is hollow so the SCAR can be pushed into the blaster to reach the standard short 9" barrel just fine).
* Compatible with springs 4" long up to \~5.5" long (Talon Claw, Lynx, and Longshot springs all work too! (just like a SLAB)).
* Ball detents hold in the magazine, so there's no clunky mag release to deal with.
* Innovative pivoting trigger mechanism, with a really smooth and crisp trigger pull!
* Upon release, files will be FREE and PUBLICLY AVAILABLE, including STEP and F3D files for you to edit and modify the blaster as you see fit!
- Check out my Printables page here: printables.com/@Sillybutts
- Have a look at my website too: stuffbysilly.com
- And please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.
patreon.com/sillybutts
buymeacoffee.com/sillybutts
#Nerf #3Dmodeling #3dPrinting #nerfpistol
Foxbat is a magazine-in-grip, top slide prime, angled talon OR straight talon, HANDCANNON of a pistol!
The blaster, hardware kits, and prints are RELEASED!
Files are available for FREE on my Printables page! printables.com/model/969546-foxbat-mag-in-grip-handcannon-pistol-printed-nerf
Hardware kits are available from OutOfDarts and SilverFoxIndustries!
- outofdarts.com/products/sillybutts-foxbat-hardware-kit
- https://silverfoxindustries.shop/products/foxbat-by-sillybutts-hardware-kit
Here's some info:
* Top slide prime, T pull prime, and optional PUMP ACTION prime!
* Straight Talon and Angled Talon compatible, just swap over the grip and trigger!
* Super cheap hardware cost (its like $26 to get a HW kit, almost HALF the cost of a Zinc or Gecko hardware kit).
* The blaster was designed around 130-220 FPS spring and barrel combos, but its relatively easy to go as low as 100 FPS, or as high as 270+ FPS!
* 9" barrel as standard, compatible with longer barrels for extra power.
* Compatible with Worker-style SCARs (DartZone SCAR, Whisker SCAR, etc) (the muzzle is hollow so the SCAR can be pushed into the blaster to reach the standard short 9" barrel just fine).
* Compatible with springs 4" long up to \~5.5" long (Talon Claw, Lynx, and Longshot springs all work too! (just like a SLAB)).
* Ball detents hold in the magazine, so there's no clunky mag release to deal with.
* Innovative pivoting trigger mechanism, with a really smooth and crisp trigger pull!
* Upon release, files will be FREE and PUBLICLY AVAILABLE, including STEP and F3D files for you to edit and modify the blaster as you see fit!
- Check out my Printables page here: printables.com/@Sillybutts
- Have a look at my website too: stuffbysilly.com
- And please consider donating via Patreon or BuyMeACoffee! Blaster development costs A LOT, and I don't earn much.
patreon.com/sillybutts
buymeacoffee.com/sillybutts
#Nerf #3Dmodeling #3dPrinting #nerfpistol
