Uploaded September 2026 | Updated November 2026, 2 days ago
We take a close look at the **Fosi Audio V3 Mono amplifier** and run a detailed **thermal performance test** to see how hot it gets under real load conditions. The V3 Mono is a compact **Class D amplifier** based around the popular **TPA3255 amp chip**, but how well does it handle heat when pushed to higher output levels?
Using a **thermal camera**, temperature probes, an oscilloscope, an Audio Precision signal generator, and a 4-ohm load, we test the amp at idle and under a **100 watt output test**. We examine the heat sink temperature, the **TPA3255 chip area**, the output inductor, regulators, op-amps, and other hot spots on the amplifier board.
A major focus of this test is the **output inductor temperature**, which appears to get significantly hotter than the main amp chip heat sink during high-power testing. We also look at input power versus output power to get a better idea of the amplifier’s efficiency and how the Fosi V3 Mono handles sustained operation.
If you’re considering the **Fosi V3 Mono monoblock amplifier**, comparing it to the **Fosi ZA3**, or simply interested in **Class D amplifier thermal design**, this video should give you a closer look at what is really happening inside the amp.
My Amazon storefront Link: amzn.to/4tj7COH
______________________________________________________________________
Your support is much appreciated;)
Patreon - I really do appreciate your support? This support helps me purchase the equipment I use for testing a reviews. Patreon.com/KissAnalog
Send your one time donation to PayPal at: KissAnalog@gmail.com
______________________________________________________________________
Fnirsi affiliate link (coupon code: EDDIE6%): fnirsi.com/eddie_644
Kaiweets provides KissAnalog viewers a discount code: 15% off code: KA15This video contains affiliate links. If you purchase through them, I may earn a commission at no extra cost to you: Links and discount codes will be added below if available.
Link to FOSI Audio: fosiaudio.com/products/fosi-audio-v3-mono-power-amplifier?sca_ref=5278085.CFVM2I9cAF&utm_source=affiliate&utm_medium=referral&utm_campaign=uppromote
Amazon Link to Fosi V3 Mono: amzn.to/3SCauda
Topics covered in this video include:
- Fosi Audio V3 Mono thermal test
- TPA3255 Class D amplifier heat performance
- Output inductor temperature testing
- 4 ohm load amplifier testing
- 100 watt amplifier output test
- Thermal camera inspection of amplifier components
- Class D amp efficiency and heat management
- Fosi V3 Mono vs ZA3 heat considerations
- Compact amplifier design and cooling concerns
Let me know in the comments what you think: is the Fosi V3 Mono running too hot, or is this normal for a compact high-power Class D amplifier?
0:00 Fosi V3 Mono Amplifier Thermal Test Preview
0:35 Testing the Fosi Audio V3 Mono Outside the Case
1:20 TPA3255 Class D Amp Chip Location Explained
2:15 Heat Sink Setup for the Fosi V3 Mono
3:05 How Class D Output Inductors and LC Filters Work
5:10 Why the Output Inductor Can Get Hot
6:30 RC Filter, Output Resistors, and Heat Concerns
7:45 Thermal Probe Setup on the V3 Mono Amp Board
9:00 HSF Tools Thermal Camera Setup
10:10 Idle Power Thermal Test Results
11:35 Hot Spots at Idle: Op-Amps, Inductor, and Regulators
13:20 Fosi V3 Mono Idle Power Draw Around 9 Watts
14:05 Audio Precision Signal Generator and Scope Setup
15:25 1 kHz Sine Wave Test Into 4 Ohms
16:30 100 Watt Output Test on the Fosi V3 Mono
18:00 TPA3255 Heat Sink Temperature vs Output Inductor Temperature
19:20 Thermal Camera View at 100 Watts Output
20:45 Output Inductor Reaches High Temperatures
22:00 4 Ohm Load Resistor Gets Extremely Hot
23:10 Input Power vs Output Power Efficiency Test
24:00 Final Thoughts on Fosi V3 Mono Heat Performance
25:25 Does the Fosi V3 Mono Need a Bigger Inductor?
26:40 Fosi V3 Mono vs Fosi ZA3 Heat Comparison
27:35 Should We Modify the V3 Mono Amp Board?
28:20 Thanks for Watching and Viewer Questions
We take a close look at the **Fosi Audio V3 Mono amplifier** and run a detailed **thermal performance test** to see how hot it gets under real load conditions. The V3 Mono is a compact **Class D amplifier** based around the popular **TPA3255 amp chip**, but how well does it handle heat when pushed to higher output levels?
Using a **thermal camera**, temperature probes, an oscilloscope, an Audio Precision signal generator, and a 4-ohm load, we test the amp at idle and under a **100 watt output test**. We examine the heat sink temperature, the **TPA3255 chip area**, the output inductor, regulators, op-amps, and other hot spots on the amplifier board.
A major focus of this test is the **output inductor temperature**, which appears to get significantly hotter than the main amp chip heat sink during high-power testing. We also look at input power versus output power to get a better idea of the amplifier’s efficiency and how the Fosi V3 Mono handles sustained operation.
If you’re considering the **Fosi V3 Mono monoblock amplifier**, comparing it to the **Fosi ZA3**, or simply interested in **Class D amplifier thermal design**, this video should give you a closer look at what is really happening inside the amp.
My Amazon storefront Link: amzn.to/4tj7COH
______________________________________________________________________
Your support is much appreciated;)
Patreon - I really do appreciate your support? This support helps me purchase the equipment I use for testing a reviews. Patreon.com/KissAnalog
Send your one time donation to PayPal at: KissAnalog@gmail.com
______________________________________________________________________
Fnirsi affiliate link (coupon code: EDDIE6%): fnirsi.com/eddie_644
Kaiweets provides KissAnalog viewers a discount code: 15% off code: KA15This video contains affiliate links. If you purchase through them, I may earn a commission at no extra cost to you: Links and discount codes will be added below if available.
Link to FOSI Audio: fosiaudio.com/products/fosi-audio-v3-mono-power-amplifier?sca_ref=5278085.CFVM2I9cAF&utm_source=affiliate&utm_medium=referral&utm_campaign=uppromote
Amazon Link to Fosi V3 Mono: amzn.to/3SCauda
Topics covered in this video include:
- Fosi Audio V3 Mono thermal test
- TPA3255 Class D amplifier heat performance
- Output inductor temperature testing
- 4 ohm load amplifier testing
- 100 watt amplifier output test
- Thermal camera inspection of amplifier components
- Class D amp efficiency and heat management
- Fosi V3 Mono vs ZA3 heat considerations
- Compact amplifier design and cooling concerns
Let me know in the comments what you think: is the Fosi V3 Mono running too hot, or is this normal for a compact high-power Class D amplifier?
0:00 Fosi V3 Mono Amplifier Thermal Test Preview
0:35 Testing the Fosi Audio V3 Mono Outside the Case
1:20 TPA3255 Class D Amp Chip Location Explained
2:15 Heat Sink Setup for the Fosi V3 Mono
3:05 How Class D Output Inductors and LC Filters Work
5:10 Why the Output Inductor Can Get Hot
6:30 RC Filter, Output Resistors, and Heat Concerns
7:45 Thermal Probe Setup on the V3 Mono Amp Board
9:00 HSF Tools Thermal Camera Setup
10:10 Idle Power Thermal Test Results
11:35 Hot Spots at Idle: Op-Amps, Inductor, and Regulators
13:20 Fosi V3 Mono Idle Power Draw Around 9 Watts
14:05 Audio Precision Signal Generator and Scope Setup
15:25 1 kHz Sine Wave Test Into 4 Ohms
16:30 100 Watt Output Test on the Fosi V3 Mono
18:00 TPA3255 Heat Sink Temperature vs Output Inductor Temperature
19:20 Thermal Camera View at 100 Watts Output
20:45 Output Inductor Reaches High Temperatures
22:00 4 Ohm Load Resistor Gets Extremely Hot
23:10 Input Power vs Output Power Efficiency Test
24:00 Final Thoughts on Fosi V3 Mono Heat Performance
25:25 Does the Fosi V3 Mono Need a Bigger Inductor?
26:40 Fosi V3 Mono vs Fosi ZA3 Heat Comparison
27:35 Should We Modify the V3 Mono Amp Board?
28:20 Thanks for Watching and Viewer Questions










