Uploaded October 2026 | Updated November 2026, 3 hours ago
🖨️ Get the Formlabs Form Studio 1: geni.us/FomlabsFormStudio1
*IMPORTANT UPDATES*
• The 75,000-layer tank rating is an expected MINIMUM, not a mandatory replacement point. THERE IS NO LIMIT. A tank may last considerably longer; replacement depends on its condition and wear. (A few people commented about this so i must have explained it wrong, my bad)
• Product External dimensions: 342 × 315 × 502 mm (W × D × H).
Recommended operating space: 360 × 330 × 790 mm (W × D × H).
*DESCRIPTION*
This is THE ONE.
For years, we’ve been asking for the Bambu of resin printers. Now Formlabs have turned up with the Form Studio 1, and before you spend your money on another machine, you need to see this.
You know how much time I spend picking these things apart. So if you’re looking at that thumbnail and wondering what the hell has happened to me, fair question. This is nearly 50 minutes of me explaining myself. And yes, there are still things that piss me off. I haven’t suddenly stopped being me.
Whether you print miniatures, massive statues or just want a resin printer that gives you fewer reasons to swear at it, watch this before deciding what comes next.
☕ Help support the channel: buymeacoffee.com/fauxhammer
📋 My review policy: fauxhammer.com/review-policy-brand-terms
━━━━━━━━━━━━━━━━━━━━
🧟 MODELS FEATURED IN THIS REVIEW
FREE FauxHammer Zombie & Survivor models by Print of the Dead: geni.us/POTD_FH_Zombies (*USE CODE* - "FAUXMEFREE" )
Yes, Now you can print your own tiny version of me. Alive or considerably less alive. Paint yours and tag me on socials so I can see what you’ve done with them!
🤖 RoboCop by Wicked 3D:
patreon.com/3dWicked/posts/february-movies-101197498
Special thanks to the creators for the models featured in this review.
━━━━━━━━━━━━━━━━━━━━
🎓 NEW TO RESIN PRINTING?
Start with my Resin Printing Beginner Guides: youtube.com/playlist?list=PLngF4BVc8PpGi9_y_kIIl7xIbFPMRMr2H
🔎 COMPARING 3D PRINTERS FOR MINIATURES?
Find my printer comparisons and buying guide here: fauxhammer.com/top-10/the-best-3d-printer-for-miniatures-models
#Resin3DPrinting #Formlabs #FauxHammer
━━━━━━━━━━━━━━━━━━━━
🧰 RESIN PRINTING SUPPLIES & TOOLS
🧪 Wargamer resin: yesthats3dprinted.com/pages/wargamer?ref=FauxHammer
🧼 3D printer cleaning mat: geni.us/3DPrinterCleaningMat
🎯 Download the Photonsters XP Range Finder: thingiverse.com/thing:6023738
🎬 Watch my XP Range Finder guide: youtu.be/Gm0-z971tgY
🎨 MINIATURE PAINTING & HOBBY SUPPLIES
🖌️ Artis Opus FauxHammer brush set: store.artis-opus.com/products/fauxhammer-mixed-brush-set-5-brush-deluxe
🛍️ Shop Element Games: elementgames.co.uk/?d=10279
🎲 Shop Wayland Games: affiliates.waylandgames.co.uk/781-1-3-4.html
📚 Shop Forbidden Planet: forbiddenplanet.com/catalog/?affid=FauxHammer
💛 SUPPORT FAUXHAMMER
⭐ Become a member for early access and member perks: youtube.com/channel/UC_9Jsf3SP8aMJgn0xv5jHjA/join
🔔 Subscribe for more reviews: youtube.com/@FauxHammer
💬 JOIN THE COMMUNITY
🖨️ Talk 3D printing in the FauxHammer 3D Printing Group: facebook.com/groups/3dprintedminiatures
🎨 Share miniature painting in PaintHub: facebook.com/groups/PaintHub
🎮 Join the conversation on Discord: discord.gg/dPexM9SeN4
🌍 MORE FAUXHAMMER
📖 Read written reviews and hobby guides: fauxhammer.com
📸 Follow on Instagram: instagram.com/fauxhammerblog
📘 Follow on Facebook: facebook.com/FauxHammerBlog
Some links above are affiliate links. Purchases through these links may earn me a commission at no extra cost to you.
🖨️ Get the Formlabs Form Studio 1: geni.us/FomlabsFormStudio1
*IMPORTANT UPDATES*
• The 75,000-layer tank rating is an expected MINIMUM, not a mandatory replacement point. THERE IS NO LIMIT. A tank may last considerably longer; replacement depends on its condition and wear. (A few people commented about this so i must have explained it wrong, my bad)
• Product External dimensions: 342 × 315 × 502 mm (W × D × H).
Recommended operating space: 360 × 330 × 790 mm (W × D × H).
*DESCRIPTION*
This is THE ONE.
For years, we’ve been asking for the Bambu of resin printers. Now Formlabs have turned up with the Form Studio 1, and before you spend your money on another machine, you need to see this.
You know how much time I spend picking these things apart. So if you’re looking at that thumbnail and wondering what the hell has happened to me, fair question. This is nearly 50 minutes of me explaining myself. And yes, there are still things that piss me off. I haven’t suddenly stopped being me.
Whether you print miniatures, massive statues or just want a resin printer that gives you fewer reasons to swear at it, watch this before deciding what comes next.
☕ Help support the channel: buymeacoffee.com/fauxhammer
📋 My review policy: fauxhammer.com/review-policy-brand-terms
━━━━━━━━━━━━━━━━━━━━
🧟 MODELS FEATURED IN THIS REVIEW
FREE FauxHammer Zombie & Survivor models by Print of the Dead: geni.us/POTD_FH_Zombies (*USE CODE* - "FAUXMEFREE" )
Yes, Now you can print your own tiny version of me. Alive or considerably less alive. Paint yours and tag me on socials so I can see what you’ve done with them!
🤖 RoboCop by Wicked 3D:
patreon.com/3dWicked/posts/february-movies-101197498
Special thanks to the creators for the models featured in this review.
━━━━━━━━━━━━━━━━━━━━
🎓 NEW TO RESIN PRINTING?
Start with my Resin Printing Beginner Guides: youtube.com/playlist?list=PLngF4BVc8PpGi9_y_kIIl7xIbFPMRMr2H
🔎 COMPARING 3D PRINTERS FOR MINIATURES?
Find my printer comparisons and buying guide here: fauxhammer.com/top-10/the-best-3d-printer-for-miniatures-models
#Resin3DPrinting #Formlabs #FauxHammer
━━━━━━━━━━━━━━━━━━━━
🧰 RESIN PRINTING SUPPLIES & TOOLS
🧪 Wargamer resin: yesthats3dprinted.com/pages/wargamer?ref=FauxHammer
🧼 3D printer cleaning mat: geni.us/3DPrinterCleaningMat
🎯 Download the Photonsters XP Range Finder: thingiverse.com/thing:6023738
🎬 Watch my XP Range Finder guide: youtu.be/Gm0-z971tgY
🎨 MINIATURE PAINTING & HOBBY SUPPLIES
🖌️ Artis Opus FauxHammer brush set: store.artis-opus.com/products/fauxhammer-mixed-brush-set-5-brush-deluxe
🛍️ Shop Element Games: elementgames.co.uk/?d=10279
🎲 Shop Wayland Games: affiliates.waylandgames.co.uk/781-1-3-4.html
📚 Shop Forbidden Planet: forbiddenplanet.com/catalog/?affid=FauxHammer
💛 SUPPORT FAUXHAMMER
⭐ Become a member for early access and member perks: youtube.com/channel/UC_9Jsf3SP8aMJgn0xv5jHjA/join
🔔 Subscribe for more reviews: youtube.com/@FauxHammer
💬 JOIN THE COMMUNITY
🖨️ Talk 3D printing in the FauxHammer 3D Printing Group: facebook.com/groups/3dprintedminiatures
🎨 Share miniature painting in PaintHub: facebook.com/groups/PaintHub
🎮 Join the conversation on Discord: discord.gg/dPexM9SeN4
🌍 MORE FAUXHAMMER
📖 Read written reviews and hobby guides: fauxhammer.com
📸 Follow on Instagram: instagram.com/fauxhammerblog
📘 Follow on Facebook: facebook.com/FauxHammerBlog
Some links above are affiliate links. Purchases through these links may earn me a commission at no extra cost to you.

![I’m Not Buying From Etsy Anymore - Eufymake E1 - One Year Later
👉 Check out the eufyMake E1: https://geni.us/EufyMakeE1
*Sign up now FOR FREE to receive a limited-time exclusive gift worth £700+ (when you purchase the Printer) and get a reminder for the in-stock launch on May 6*
* Code [fauxhammer]: £80 ($100) off orders £2,300+
* Code [fauxhammere1]: After the general sale starts on May 6, the first 30 fans who redeem this code with an E1 purchase will get free print materials worth over £249.
Check out the WhamBam Ultim-8 Jig Here: https://geni.us/WhamBamAccessories
*ORIGINAL REVIEW* - https://youtu.be/ZjUD2WnLzdA
🎨 Support the channel and fuel your hobby addiction
🛡️ Loot Studios Sci-Fi Models - https://geni.us/LootStudiosSciFi
🧙 Loot Studios Fantasy Miniatures - https://geni.us/LootStudiosFantasy
🎁 Free Loot Minis - https://geni.us/LootStudiosFreebies
🎧 Listen to me rant on @ThePaintingPhase
📏 Calibrate your resin printer like a pro - https://youtu.be/Gm0-z971tgY
🧼 Grab a 3D Printer Cleaning Mat - https://geni.us/3DPrinterCleaningMat
🖌️ Artis Opus FauxHammer Essentials Brush Set - https://store.artis-opus.com/products/fauxhammer-mixed-brush-set-5-brush-deluxe
🔗 More from FauxHammer
🌐 Website: https://www.fauxhammer.com/
👥 Facebook: https://www.facebook.com/groups/3dprintedminiatures
💬 Discord: https://discord.gg/dPexM9SeN4
📸 Instagram: https://www.instagram.com/fauxhammerblog/
🐦 Twitter: https://twitter.com/FauxHammerBlog
🧪 Looking for the best 3D printer for miniatures?
https://www.fauxhammer.com/top-10/the-best-3d-printer-for-miniatures-models/
🎬 Try Video Editing by VidPros: https://app.vidpros.io/r/J50Z26
#eufymake #uvprinter I’m Not Buying From Etsy Anymore - Eufymake E1 - One Year Later](https://i.ytimg.com/vi/NhI-ezYj_FI/mqdefault.jpg)








