Uploaded January 2026 | Updated November 2026, 2 hours ago
knivesproject.com πͺ β the shop where every knife is crafted with care, character, and the spirit of true craftsmanship! βοΈ
ο»Ώ I wanted to see what would happen if I pushed canister forging a little further than usual β so I filled a blade-shaped canister with steel bearing balls and powdered steel and let heat and pressure do the rest. What started as loose industrial steel slowly became something solid, heavy, and alive under the hammer.
After sealing the canister, I brought it up to a white heat and compressed it under the hydraulic press, forcing hundreds of individual steel elements to fuse into a single billet. Once the outer shell was ground away, the real character of the steel began to reveal itself. From there, the blade took shape through a mix of power forging and careful hand work, refining the profile, bevels, and balance step by step.
00:00 β Preparing materials
07:17 β Forging the blade
13:25 β Refining the shape
21:40 β Fitting the handle
I finished the knife with a custom handle, shaped and polished to fit the weight and presence of the blade, then brought the edge down to razor sharp. The final tests werenβt for show β just an honest check to see if the steel held up the way it should.
This project is about canister forging, custom knife making, and the satisfaction of turning raw steel into something functional and permanent. Stay until the end to see how it performs.
Our Facebook: facebook.com/Knives.Project.channel
#knifemaking #canisterdamascus #blacksmith #forgedknife
knivesproject.com πͺ β the shop where every knife is crafted with care, character, and the spirit of true craftsmanship! βοΈ
ο»Ώ I wanted to see what would happen if I pushed canister forging a little further than usual β so I filled a blade-shaped canister with steel bearing balls and powdered steel and let heat and pressure do the rest. What started as loose industrial steel slowly became something solid, heavy, and alive under the hammer.
After sealing the canister, I brought it up to a white heat and compressed it under the hydraulic press, forcing hundreds of individual steel elements to fuse into a single billet. Once the outer shell was ground away, the real character of the steel began to reveal itself. From there, the blade took shape through a mix of power forging and careful hand work, refining the profile, bevels, and balance step by step.
00:00 β Preparing materials
07:17 β Forging the blade
13:25 β Refining the shape
21:40 β Fitting the handle
I finished the knife with a custom handle, shaped and polished to fit the weight and presence of the blade, then brought the edge down to razor sharp. The final tests werenβt for show β just an honest check to see if the steel held up the way it should.
This project is about canister forging, custom knife making, and the satisfaction of turning raw steel into something functional and permanent. Stay until the end to see how it performs.
Our Facebook: facebook.com/Knives.Project.channel
#knifemaking #canisterdamascus #blacksmith #forgedknife




